Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 22 11月, 2012 6 次提交
  3. 16 11月, 2012 7 次提交
  5. 15 11月, 2012 6 次提交
  7. 14 11月, 2012 4 次提交
  9. 13 11月, 2012 7 次提交
    • F
      usb: host: xhci: move HC_STATE_SUSPENDED check to xhci_suspend() · 77b84767
      由 Felipe Balbi 提交于 
      that check will have to be done by all users
of xhci_suspend() so it sounds a lot better to
move the check to xhci_suspend() in order to
avoid code duplication.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
      77b84767
    • A
      usb: host: xhci: Stricter conditional for Z1 system models for Compliance Mode Patch · b0e4e606
      由 Alexis R. Cortes 提交于 
      This minor patch creates a more stricter conditional for the Z1 sytems for applying
the Compliance Mode Patch, this to avoid the quirk to be applied to models that
contain a "Z1" in their dmi product string but are different from Z1 systems.

This patch should be backported to stable kernels as old as 3.2, that
contain the commit 71c731a2 "usb: host:
xhci: Fix Compliance Mode on SN65LVPE502CP Hardware"
Signed-off-by: NAlexis R. Cortes <alexis.cortes@ti.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
      b0e4e606
    • S
      xhci: Extend Fresco Logic MSI quirk. · bba18e33
      由 Sarah Sharp 提交于 
      Ali reports that plugging a device into the Fresco Logic xHCI host with
PCI device ID 1400 produces an IRQ error:

 do_IRQ: 3.176 No irq handler for vector (irq -1)

Other early Fresco Logic host revisions don't support MSI, even though
their PCI config space claims they do.  Extend the quirk to disabling
MSI to this chipset revision.  Also enable the short transfer quirk,
since it's likely this revision also has that quirk, and it should be
harmless to enable.

04:00.0 0c03: 1b73:1400 (rev 01) (prog-if 30 [XHCI])
        Subsystem: 1d5c:1000
        Physical Slot: 3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 51
        Region 0: Memory at d4600000 (32-bit, non-prefetchable) [size=64K]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000feeff00c  Data: 41b1
        Capabilities: [80] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <2us, L1 <32us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: xhci_hcd

This patch should be backported to stable kernels as old as 2.6.36, that
contain the commit f5182b41 "xhci:
Disable MSI for some Fresco Logic hosts."
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: NA Sh <smr.ash1991@gmail.com>
Tested-by: NA Sh <smr.ash1991@gmail.com>
Cc: stable@vger.kernel.org
      bba18e33
    • J
      xhci: fix null-pointer dereference when destroying half-built segment rings · 68e5254a
      由 Julius Werner 提交于 
      xhci_alloc_segments_for_ring() builds a list of xhci_segments and links
the tail to head at the end (forming a ring). When it bails out for OOM
reasons half-way through, it tries to destroy its half-built list with
xhci_free_segments_for_ring(), even though it is not a ring yet. This
causes a null-pointer dereference upon hitting the last element.

Furthermore, one of its callers (xhci_ring_alloc()) mistakenly believes
the output parameters to be valid upon this kind of OOM failure, and
calls xhci_ring_free() on them. Since the (incomplete) list/ring should
already be destroyed in that case, this would lead to a use after free.

This patch fixes those issues by having xhci_alloc_segments_for_ring()
destroy its half-built, non-circular list manually and destroying the
invalid struct xhci_ring in xhci_ring_alloc() with a plain kfree().

This patch should be backported to kernels as old as 2.6.31, that
contains the commit 0ebbab37 "USB: xhci:
Ring allocation and initialization."

A separate patch will need to be developed for kernels older than 3.4,
since the ring allocation code was refactored in that kernel.
Signed-off-by: NJulius Werner <jwerner@chromium.org>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
      68e5254a
    • S
      xHCI: Fix TD Size calculation on 1.0 hosts. · 4525c0a1
      由 Sarah Sharp 提交于 
      The xHCI 1.0 specification made a change to the TD Size field in TRBs.
The value is now the number of packets that remain to be sent in the TD,
not including this TRB.  The TD Size value for the last TRB in a TD must
always be zero.

The xHCI function xhci_v1_0_td_remainder() attempts to calculate this,
but it gets it wrong.  First, it erroneously reuses the old
xhci_td_remainder function, which will right shift the value by 10.  The
xHCI 1.0 spec as of June 2011 says nothing about right shifting by 10.
Second, it does not set the TD size for the last TRB in a TD to zero.

Third, it uses roundup instead of DIV_ROUND_UP.  The total packet count
is supposed to be the total number of bytes in this TD, divided by the
max packet size, rounded up.  DIV_ROUND_UP is the right function to use
in that case.

With the old code, a TD on an endpoint with max packet size 1024 would
be set up like so:
TRB 1, TRB length = 600 bytes, TD size = 0
TRB 1, TRB length = 200 bytes, TD size = 0
TRB 1, TRB length = 100 bytes, TD size = 0

With the new code, the TD would be set up like this:
TRB 1, TRB length = 600 bytes, TD size = 1
TRB 1, TRB length = 200 bytes, TD size = 1
TRB 1, TRB length = 100 bytes, TD size = 0

This commit should be backported to kernels as old as 3.0, that contain
the commit 4da6e6f2 "xhci 1.0: Update TD
size field format."
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: NChintan Mehta <chintan.mehta@sibridgetech.com>
Reported-by: NShimmer Huang <shimmering.h@gmail.com>
Tested-by: NBhavik Kothari <bhavik.kothari@sibridgetech.com>
Tested-by: NShimmer Huang <shimmering.h@gmail.com>
Cc: stable@vger.kernel.org
      4525c0a1
    • S
      xhci: Fix conditional check in bandwidth calculation. · 392a07ae
      由 Sarah Sharp 提交于 
      David reports that at drivers/usb/host/xhci.c:2257:

static bool xhci_is_sync_in_ep(unsigned int ep_type)
{
    return (ep_type == ISOC_IN_EP || ep_type != INT_IN_EP);
}

The static analyser cppcheck says

[linux-3.7-rc2/drivers/usb/host/xhci.c:2257]: (style) Redundant condition: If ep_type == 5, the comparison ep_type != 7 is always true.

Maybe the original programmer intention was something like

static bool xhci_is_sync_in_ep(unsigned int ep_type)
{
    return (ep_type == ISOC_IN_EP || ep_type == INT_IN_EP);
}

Fix this.

This patch should be backported to stable kernels as old as 3.2, that
contain the commit 2b698999 "xhci: USB
3.0 BW checking."
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Cc: stable@vger.kernel.org
      392a07ae
    • S
      xhci: Avoid global symbol pollution with handshake. · 2611bd18
      由 Sarah Sharp 提交于 
      Non-static xHCI driver symbols should start with the "xhci_" prefix, in
order to avoid namespace pollution.  Rename the "handshake" function to
"xhci_handshake".
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: NBen Hutchings <ben@decadent.org.uk>
      2611bd18
  11. 12 11月, 2012 4 次提交
    • A
      USB: report submission of active URBs · 2f02bc8a
      由 Alan Stern 提交于 
      This patch (as1633) changes slightly the way usbcore handled
submissions of URBs that are already active.  It will now return
-EBUSY rather than -EINVAL, and it will call WARN_ONCE to draw
people's attention to the bug.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2f02bc8a
    • A
      USB: EHCI: bugfix: urb->hcpriv should not be NULL · 2656a9ab
      由 Alan Stern 提交于 
      This patch (as1632b) fixes a bug in ehci-hcd.  The USB core uses
urb->hcpriv to determine whether or not an URB is active; host
controller drivers are supposed to set this pointer to a non-NULL
value when an URB is queued.  However ehci-hcd sets it to NULL for
isochronous URBs, which defeats the check in usbcore.

In itself this isn't a big deal.  But people have recently found that
certain sequences of actions will cause the snd-usb-audio driver to
reuse URBs without waiting for them to complete.  In the absence of
proper checking by usbcore, the URBs get added to their endpoint list
twice.  This leads to list corruption and a system freeze.

The patch makes ehci-hcd assign a meaningful value to urb->hcpriv for
isochronous URBs.  Improving robustness always helps.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: NArtem S. Tashkinov <t.artem@lycos.com>
Reported-by: NChristof Meerwald <cmeerw@cmeerw.org>
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2656a9ab
    • A
      USB: EHCI: miscellaneous cleanups for the library conversion · 1b36810e
      由 Alan Stern 提交于 
      This patch (as1630) cleans up a few minor items resulting from the
split-up of the ehci-hcd driver:

	Remove the product_desc string from the ehci_driver_overrides
	structure.  All drivers will use the generic "EHCI Host
	Controller" string.  (This was requested by Felipe Balbi.)

	Allow drivers to pass a NULL pointer to ehci_init_driver()
	if they don't have to override any settings.

	Remove a #define symbol that is no longer used from the
	ChipIdea host driver.

	Rename overrides to pci_overrides in ehci-pci.c, for
	consistency with ehci-platform.c.

	Mark the *_overrides structures as __initdata.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1b36810e
    • A
      USB: fix endpoint-disabling for failed config changes · 36caff5d
      由 Alan Stern 提交于 
      This patch (as1631) fixes a bug that shows up when a config change
fails for a device under an xHCI controller.  The controller needs to
be told to disable the endpoints that have been enabled for the new
config.  The existing code does this, but before storing the
information about which endpoints were enabled!  As a result, any
second attempt to install the new config is doomed to fail because
xhci-hcd will refuse to enable an endpoint that is already enabled.

The patch optimistically initializes the new endpoints' device
structures before asking the device to switch to the new config.  If
the request fails then the endpoint information is already stored, so
we can use usb_hcd_alloc_bandwidth() to disable the endpoints with no
trouble.  The rest of the error path is slightly more complex now; we
have to disable the new interfaces and call put_device() rather than
simply deallocating them.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: NMatthias Schniedermeyer <ms@citd.de>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      36caff5d
  13. 09 11月, 2012 1 次提交
  15. 08 11月, 2012 5 次提交