Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

It turns out that test-compiling this file on x86-64 doesn't really
help, because much of it is x86-32-specific.  And so I hadn't noticed
the slightly over-eager removal of the 'r' from 'addr' variable despite
thinking I had tested it.
Signed-off-by: NLinus "oopsie" Torvalds <torvalds@linux-foundation.org>

Several users of "find_vma_prev()" were not in fact interested in the
previous vma if there was no primary vma to be found either.  And in
those cases, we're much better off just using the regular "find_vma()",
and then "prev" can be looked up by just checking vma->vm_prev.

The find_vma_prev() semantics are fairly subtle (see Mikulas' recent
commit 83cd904d: "mm: fix find_vma_prev"), and the whole "return
prev by reference" means that it generates worse code too.

Thus this "let's avoid using this inconvenient and clearly too subtle
interface when we don't really have to" patch.

Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As done for the other ep93xx machines in:

commit 9a6879bd
ARM: ep93xx: convert to MULTI_IRQ_HANDLER

Now that there is a generic IRQ handler for multiple VIC devices use it
for vision_ep9307 to help building multi platform kernels.
Signed-off-by: NHartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NRyan Mallon <rmallon@gmail.com>
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Fixes atmel_mxt_ts freeze on Universal C210.
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Failure is reported on hx4700 with kernel v3.3-rc1.

__mfp_validate: GPIO20 is invalid pin
__mfp_validate: GPIO21 is invalid pin
__mfp_validate: GPIO15 is invalid pin
__mfp_validate: GPIO78 is invalid pin
__mfp_validate: GPIO79 is invalid pin
__mfp_validate: GPIO80 is invalid pin
__mfp_validate: GPIO33 is invalid pin
__mfp_validate: GPIO48 is invalid pin
__mfp_validate: GPIO49 is invalid pin
__mfp_validate: GPIO50 is invalid pin

Since pxa_last_gpio is used in mfp-pxa2xx driver. But it's only
updated in pxa-gpio driver that run after mfp-pxa2xx driver.

So update the pxa_last_gpio first in mfp-pxa2xx driver.
Reported-by: NPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

Both reboot (via reboot(RB_AUTOBOOT)) and suspend freeze on hx4700.

Registration of pxa_gpio_syscore_ops is moved into pxa-gpio driver,
but it still exists in arch-pxa directory. It resulsts failure on
reboot and suspend.

Now remove the registration code in arch-pxa.
Reported-by: NPaul Parsons <lost.distance@yahoo.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@gmail.com>

gpio-pxa driver is shared among arch-pxa and arch-mmp. Clock is the
essential component on pxa3xx/pxa95x and arch-mmp. So we need to
define dummy clock in pxa25x/pxa27x instead.

This regression was introduced by the commit "ARM: pxa: add dummy
clock for sa1100-rtc", id a55b5ada.
Reported-by: NJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: NPaul Parsons <lost.distance@yahoo.com>
Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>

Michael Cree said:

: : I have noticed some user space problems (pulseaudio crashes in pthread
: : code, glibc/nptl test suite failures, java compiler freezes on SMP alpha
: : systems) that arise when using a 2.6.39 or later kernel on Alpha.
: : Bisecting between 2.6.38 and 2.6.39 (using glibc/nptl test suite as
: : criterion for good/bad kernel) eventually leads to:
: :
: : 8d7718aa is the first bad commit
: : commit 8d7718aa
: : Author: Michel Lespinasse <walken@google.com>
: : Date:   Thu Mar 10 18:50:58 2011 -0800
: :
: :     futex: Sanitize futex ops argument types
: :
: :     Change futex_atomic_op_inuser and futex_atomic_cmpxchg_inatomic
: :     prototypes to use u32 types for the futex as this is the data type the
: :     futex core code uses all over the place.
: :
: : Looking at the commit I see there is a change of the uaddr argument in
: : the Alpha architecture specific code for futexes from int to u32, but I
: : don't see why this should cause a problem.

Richard Henderson said:

: futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
:                               u32 oldval, u32 newval)
: ...
:         :       "r"(uaddr), "r"((long)oldval), "r"(newval)
:
:
: There is no 32-bit compare instruction.  These are implemented by
: consistently extending the values to a 64-bit type.  Since the
: load instruction sign-extends, we want to sign-extend the other
: quantity as well (despite the fact it's logically unsigned).
:
: So:
:
: -        :       "r"(uaddr), "r"((long)oldval), "r"(newval)
: +        :       "r"(uaddr), "r"((long)(int)oldval), "r"(newval)
:
: should do the trick.

Michael said:

: This fixes the glibc test suite failures and the pulseaudio related
: crashes, but it does not fix the java compiiler lockups that I was (and
: are still) observing.  That is some other problem.
Reported-by: NMichael Cree <mcree@orcon.net.nz>
Tested-by: NMichael Cree <mcree@orcon.net.nz>
Acked-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Reviewed-by: NMatt Turner <mattst88@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

s3c2410_dma_suspend suspends channels from 0 to dma_channels.
s3c2410_dma_resume resumes channels in reverse order. So
pointer should be decremented instead of being incremented.
Signed-off-by: NGusakov Andrey <dron0gus@gmail.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

It turned out that a performance counter on AMD does not
count at all when the GO or HO bit is set in the control
register and SVM is disabled in EFER.

This patch works around this issue by masking out the HO bit
in the performance counter control register when SVM is not
enabled.

The GO bit is not touched because it is only set when the
user wants to count in guest-mode only. So when SVM is
disabled the counter should not run at all and the
not-counting is the intended behaviour.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Avi Kivity <avi@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: stable@vger.kernel.org # v3.2
Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Carlos was getting

	WARNING: at drivers/pci/pci.c:118 pci_ioremap_bar+0x24/0x52()

when probing his sound card, and sound did not work.  After adding
pci=use_crs to the kernel command line, no more trouble.

Ok, we can add a quirk.  dmidecode output reveals that this is an MSI
MS-7253, for which we already have a quirk, but the short-sighted
author tied the quirk to a single BIOS version, making it not kick in
on Carlos's machine with BIOS V1.2.  If a later BIOS update makes it
no longer necessary to look at the _CRS info it will still be
harmless, so let's stop trying to guess which versions have and don't
have accurate _CRS tables.

Addresses https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5533
Also see <https://bugzilla.kernel.org/show_bug.cgi?id=42619>.
Reported-by: NCarlos Luna <caralu74@gmail.com>
Reviewed-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Commit b27b0727 (ARM: 7265/1: restart: S3C24XX: use new restart hook)
introduced the new restart hook also for the S3C244x cpus, but it
was only defined in the S3C2440 scope, i.e. when CPU_S3C2440 was
selected. Devices using the S3C2442 like the GTA02 normally don't select
this CPU which leads to compilation errors like:
    LD      .tmp_vmlinux1
  arch/arm/mach-s3c2440/built-in.o:(.arch.info.init+0x3c): undefined reference
to `s3c2440_restart'
  make: *** [.tmp_vmlinux1] Error 1

Therefore move the s3c2440_restart function to s3c244x.c which is
common to both cpus and also fix the naming to reflect this.
Reported-and-tested-by: NDenis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

The device link core registers for hsotg is base + 0000h
~ base + 11000h.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
[Rebased on the newest git/kgene/linux-samsung #for-next]
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

Device tree support on at91sam9g45 family SoC. Only call
platform_device_register() if no dma-controller node is
found in device tree.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

DMA controller can deduce its configuration data from
the platform. Remove the platform data and match device
types with the compatible ones.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

In the spirit of commit 29cf7a30 ("x86/PCI: use host bridge _CRS
info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by
default on a board that needs it.

This fixes boot failures and oopses introduced in 3e3da00c
("x86/pci: AMD one chain system to use pci read out res").  The quirk
is quite targetted (to a specific board and BIOS version) for two
reasons:

 (1) to emphasize that this method of tackling the problem one quirk
     at a time is a little insane

 (2) to give BIOS vendors an opportunity to use simpler tables and
     allow us to return to generic behavior (whatever that happens to
     be) with a later BIOS update

In other words, I am not at all happy with having quirks like this.
But it is even worse for the kernel not to work out of the box on
these machines, so...

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42619Reported-by: NSvante Signell <svante.signell@telia.com>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

The user may wish to set their own value (for real cross compiles).  Since the
top level Makefile initialises CROSS_COMPILE to empty by default, we must
check it for being empty (rather than for being defined) before we override.
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

This patch fixes a wrong loop limit on UART init.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

This patch fixes a HW bug by flushing RX FIFOs of the UARTs on init. It was
ported from NXP's git.lpclinux.com tree.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

This patch fixes the wakeup disable function by clearing latched events.
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

This patch fixes the initialization of the interrupt controller of the LPC32xx
by correctly setting up SIC1 and SIC2 instead of (wrongly) using the same value
as for the Main Interrupt Controller (MIC).
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

The GPI_28 IRQ was not registered properly. The registration of
IRQ_LPC32XX_GPI_28 was added and the (wrong) IRQ_LPC32XX_GPI_11 at
LPC32XX_SIC1_IRQ(4) was replaced by IRQ_LPC32XX_GPI_28 (see manual of
LPC32xx / interrupt controller).
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Cc: stable@vger.kernel.org

The new is_compat_task() define for the !COMPAT case in
include/linux/compat.h conflicts with a similar define in
arch/s390/include/asm/compat.h.

This is the minimal patch which fixes the build issues.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

omap3isp depends on omap's iommu and will fail to probe if
initialized before it (which always happen if they are builtin).

Make omap's iommu subsys_initcall as an interim solution until
the probe deferral mechanism is merged.
Reported-by: NJames <angweiyang@gmail.com>
Debugged-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Cc: stable <stable@vger.kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>

This fixes a kernel oops with CONFIG_DEBUG_VM triggered by a
VM_BUG_ON(bad_range()): kernel BUG at mm/page_alloc.c:748.

With memory hotplug on System z, it is possible that the memory
online/offline state is preserved over a system restart, e.g. there
may be offline memory blocks in ZONE_DMA or ZONE_NORMAL. So far,
the offline memory range has always been added to ZONE_MOVABLE during
system start, so that it was possible to have ZONE_MOVABLE interleave
with ZONE_DMA or ZONE_NORMAL. This patch fixes that by checking for
zone overlap before adding memory.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

arch/s390/kernel/crash_dump.c included 'linux/crash_dump.h' twice,
remove the duplicate.
Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Enable the compat keyctl wrapper on s390x so that 32-bit s390 userspace can
call the keyctl() syscall.

There's an s390x assembly wrapper that truncates all the register values to
32-bits and this then calls compat_sys_keyctl() - but the latter only exists if
CONFIG_KEYS_COMPAT is enabled, and the s390 Kconfig doesn't enable it.

Without this patch, 32-bit calls to the keyctl() syscall are given an ENOSYS
error:

	[root@devel4 ~]# keyctl show
	Session Keyring
	-3: key inaccessible (Function not implemented)
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: dan@danny.cz
Cc: Carsten Otte <cotte@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: linux-s390@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

arch/arm/mach-shmobile/board-ag5evm.c: included 'linux/dma-mapping.h'
twice, remove the duplicate.
Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Fix the bit field width information for the IPSR4 register
in the r8a7779 pin function controller (PFC).

Without this fix the Marzen board fails to receive data
over the serial console due to misconfigured pin function
for the RX pin.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Tested-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Convert the sh73a0 SMP code to use 32-bit PSTR access.

This fixes wakeup from deep sleep for sh73a0 secondary CPUs.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The latest sh_eth driver needs a resource of TSU in the channel 1,
if the controller has TSU registers. So, this patch adds the resource.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

This has been obsolescent for a while; time for the final push.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Correct spelling "erorr" to "error" in
arch/sh/drivers/pci/pci-sh7780.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

warning:
unreferenced object 0xffff8801f6914200 (size 512):
  comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s)
  hex dump (first 32 bytes):
    00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00  ................
    60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00  `X/.............
  backtrace:
    [<ffffffff81c2408c>] kmemleak_alloc+0x26/0x43
    [<ffffffff8113764f>] __kmalloc+0x121/0x183
    [<ffffffff81ca8d93>] get_current_resources+0x5a/0xc6
    [<ffffffff81c5bedd>] pci_acpi_scan_root+0x13c/0x21c
    [<ffffffff81c2a745>] acpi_pci_root_add+0x1e1/0x421
    [<ffffffff81408f50>] acpi_device_probe+0x50/0x190
    [<ffffffff8149edc7>] really_probe+0x99/0x126
    [<ffffffff8149ef83>] driver_probe_device+0x3b/0x56
    [<ffffffff8149effd>] __driver_attach+0x5f/0x82
    [<ffffffff8149d860>] bus_for_each_dev+0x5c/0x88
    [<ffffffff8149eb87>] driver_attach+0x1e/0x20
    [<ffffffff8149e7cc>] bus_add_driver+0xca/0x21d
    [<ffffffff8149f47b>] driver_register+0x91/0xfe
    [<ffffffff81409d09>] acpi_bus_register_driver+0x43/0x45
    [<ffffffff8278bdc9>] acpi_pci_root_init+0x20/0x28
    [<ffffffff810001e7>] do_one_initcall+0x57/0x134

The system has _CRS for root buses, but they are not used because the machine
date is before the cutoff date for _CRS usage.

Try to free those unused resource arrays and names.
Reviewed-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Fix this:

arch/arm/mach-omap2/mailbox.c: In function 'omap2_mbox_probe':
arch/arm/mach-omap2/mailbox.c:354: error: 'omap2_mboxes' undeclared (first use in this function)
arch/arm/mach-omap2/mailbox.c:354: error: (Each undeclared identifier is reported only once
arch/arm/mach-omap2/mailbox.c:354: error: for each function it appears in.)

Which happens on CONFIG_ARCH_OMAP2 && !CONFIG_SOC_OMAP2420, due to
missing omap2_mboxes declaration.

In addition, make sure we declare the right mailbox instances for 2430.
Reported-by: NRussell King <linux@arm.linux.org.uk>
Signed-off-by: NOhad Ben-Cohen <ohad@wizery.com>
Cc: Hiroshi Doyu <hdoyu@nvidia.com>
Cc: Omar Ramirez Luna <omar.ramirez@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

This fixes smsc911x support on platforms using gpmc_smsc911x_init().

Commit c7e963f6 (net/smsc911x: Add regulator support) added
the requirement that platforms provide vdd33a and vddvario supplies.
Signed-off-by: NMatt Porter <mporter@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>