This will eventually allow us, for example, to kick off null callback
from contexts where we can't sleep.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Now that we have both nfsd4_callback and nfsd4_cb_conn structures, I get
confused if variables of both types are always named cb....
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This fixes an unnecessary BUG().
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

If we already had a RW open for a file, and get a readonly open, we were
piggybacking on the existing RW open.  That's inconsistent with the
downgrade logic which blows away the RW open assuming you'll still have
a readonly open.

Also, make sure there is a readonly or writeonly open available for
locking, again to prevent bad behavior in downgrade cases when any RW
open may be lost.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

It's OK for this function to return without setting filp--we do it in
the special-stateid case.

And there's a legitimate case where we can hit this, since we do permit
reads on write-only stateid's.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Commit f9d7562f "nfsd4: share file
descriptors between stateid's" didn't correctly account for O_RDWR opens.
Symptoms include leaked files, resulting in failures to unmount and/or
warnings about orphaned inodes on reboot.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Fixes at least one real minor bug: the nfs4 recovery dir sysctl
would not return its status properly.

Also I finished Al's 1e41568d ("Take ima_path_check() in nfsd
past dentry_open() in nfsd_open()") commit, it moved the IMA
code, but left the old path initializer in there.

The rest is just dead code removed I think, although I was not
fully sure about the "is_borc" stuff. Some more review
would be still good.

Found by gcc 4.6's new warnings.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The vfs doesn't really allow us to "upgrade" a file descriptor from
read-only to read-write, and our attempt to do so in nfs4_upgrade_open
is ugly and incomplete.

Move to a different scheme where we keep multiple opens, shared between
open stateid's, in the nfs4_file struct.  Each file will be opened at
most 3 times (for read, write, and read-write), and those opens will be
shared between all clients and openers.  On upgrade we will do another
open if necessary instead of attempting to upgrade an existing open.
We keep count of the number of readers and writers so we know when to
close the shared files.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

It is legal to perform a write using the lock stateid that was
originally associated with a read lock, or with a file that was
originally opened for read, but has since been upgraded.

So, when checking the openmode, check the mode associated with the
open stateid from which the lock was derived.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Move more work into helper functions.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

The delegation code mostly pretends to support either read or write
delegations.  However, correct support for write delegations would
require, for example, breaking of delegations (and/or implementation of
cb_getattr) on stat.  Currently all that stops us from handing out
delegations is a subtle reference-counting issue.

Avoid confusion by adding an earlier check that explicitly refuses write
delegations.

For now, though, I'm not going so far as to rip out existing
half-support for write delegations, in case we get around to using that
soon.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

If someone tries to shut down the laundry_wq while it isn't up it'll
cause an oops.

This can happen because write_ports can create a nfsd_svc before we
really start the nfs server, and we may fail before the server is ever
started.

Also make sure state is shutdown on error paths in nfsd_svc().

Use a common global nfsd_up flag instead of nfs4_init, and create common
helper functions for nfsd start/shutdown, as there will be other work
that we want done only when we the number of nfsd threads transitions
between zero and nonzero.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

This is overkill.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

If the server is out of memory is better for clients to back off and
retry than to just error out.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Note the session has to be put() here regardless of what happens to the
client.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This reportedly causes a lockdep warning on nfsd shutdown.  That looks
like a false positive to me, but there's no reason why this needs the
state lock anyway.
Reported-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

NFSv4.1 adds additional flags to the share_access argument of the open
call.  These flags need to be masked out in some of the existing code,
but current code does that inconsistently.
Tested-by: NMichael Groshans <groshans@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This reverts commit 78155ed7.

We're depending here on the boot time that we use to generate the
stateid being monotonic, but get_seconds() is not necessarily.

We still depend at least on boot_time being different every time, but
that is a safer bet.

We have a few reports of errors that might be explained by this problem,
though we haven't been able to confirm any of them.

But the minor gain of distinguishing expired from stale errors seems not
worth the risk.

Conflicts:

	fs/nfsd/nfs4state.c
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The alloc_init_file() first adds a file to the hash and then
initializes its fi_inode, fi_id and fi_had_conflict.

The uninitialized fi_inode could thus be erroneously checked by
the find_file(), so move the hash insertion lower.

The client_mutex should prevent this race in practice; however, we
eventually hope to make less use of the client_mutex, so the ordering
here is an accident waiting to happen.

I didn't find whether the same can be true for two other fields,
but the common sense tells me it's better to initialize an object
before putting it into a global hash table :)
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

This is a mandatory operation.  Also, here (not in open) is where we
should be committing the reboot recovery information.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

nfsd4_set_callback_client must be called under the state lock to atomically
set or unset the callback client and shutting down the previous one.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Get a refcount on the client on SEQUENCE,
Release the refcount and renew the client when all respective compounds completed.
Do not expire the client by the laundromat while in use.
If the client was expired via another path, free it when the compounds
complete and the refcount reaches 0.

Note that unhash_client_locked must call list_del_init on cl_lru as
it may be called twice for the same client (once from nfs4_laundromat
and then from expire_client)
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Mark the client as expired under the client_lock so it won't be renewed
when an nfsv4.1 session is done, after it was explicitly expired
during processing of the compound.

Do not renew a client mark as expired (in particular, it is not
on the lru list anymore)
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Currently just initialize the cl_refcount to 1
and decrement in expire_client(), conditionally freeing the
client when the refcount reaches 0.

To be used later by nfsv4.1 compounds to keep the client from
timing out while in use.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Separate out unhashing of the client and session.
To be used later by the laundromat.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

To be used later on to hold a reference count on the client while in use by a
nfsv4.1 compound.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

rather than list_del_init, list_add
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

and grab the client lock once for all the client's sessions.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

In preparation to share the lock's scope to both client
and session hash tables.
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

It's legal to send a DESTROY_SESSION outside any session (as the only
operation in a compound), in which case cstate->session will be NULL;
check for that case.

While we're at it, move these checks into a separate helper function.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

In the replay case, the

	renew_client(session->se_client);

happens after we've droppped the sessionid_lock, and without holding a
reference on the session; so there's nothing preventing the session
being freed before we get here.

Thanks to Benny Halevy for catching a bug in an earlier version of this
patch.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Acked-by: NBenny Halevy <bhalevy@panasas.com>

Enforce the rules about compound op ordering.

Motivated by implementing RECLAIM_COMPLETE, for which the client is
implicit in the current session, so it is important to ensure a
succesful SEQUENCE proceeds the RECLAIM_COMPLETE.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The rfc allows a client to change the callback parameters, but we didn't
previously implement it.

Teach the callbacks to rerun themselves (by placing themselves on a
workqueue) when they recognize that their rpc task has been killed and
that the callback connection has changed.

Then we can change the callback connection by setting up a new rpc
client, modifying the nfs4 client to point at it, waiting for any work
in progress to complete, and then shutting down the old client.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Mainly I just want to separate the arguments used for setting up the tcp
client from the rest.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Now that the shutdown sequence guarantees callbacks are shut down before
the client is destroyed, we no longer have a use for cl_count.

We'll probably reinstate a reference count on the client some day, but
it will be held by users other than callbacks.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

The NFSv4 server's fl_break callback can sleep (dropping the BKL), in
order to allocate a new rpc task to send a recall to the client.

As far as I can tell this doesn't cause any races in the current code,
but the analysis is difficult.  Also, the sleep here may complicate the
move away from the BKL.

So, just schedule some work to do the job for us instead.  The work will
later also prove useful for restarting a call after the callback
information is changed.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

We should clear these flags on any new create_session, not just on the
first one.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

I haven't found this useful.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

Once we've expired the client, there's no further purpose to the
callbacks; go ahead and shut down the callback client rather than
waiting for the last reference to go.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>