Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 16 8月, 2011 1 次提交
  3. 11 8月, 2011 1 次提交
  5. 05 8月, 2011 1 次提交
  7. 01 7月, 2011 1 次提交
    • P
      perf: Remove the nmi parameter from the swevent and overflow interface · a8b0ca17
      由 Peter Zijlstra 提交于 
      The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
      a8b0ca17
  9. 26 5月, 2011 1 次提交
  11. 25 5月, 2011 1 次提交
    • K
      x86,mm: make pagefault killable · 37b23e05
      由 KOSAKI Motohiro 提交于 
      When an oom killing occurs, almost all processes are getting stuck at the
following two points.

	1) __alloc_pages_nodemask
	2) __lock_page_or_retry

1) is not very problematic because TIF_MEMDIE leads to an allocation
failure and getting out from page allocator.

2) is more problematic.  In an OOM situation, zones typically don't have
page cache at all and memory starvation might lead to greatly reduced IO
performance.  When a fork bomb occurs, TIF_MEMDIE tasks don't die quickly,
meaning that a fork bomb may create new process quickly rather than the
oom-killer killing it.  Then, the system may become livelocked.

This patch makes the pagefault interruptible by SIGKILL.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      37b23e05
  13. 21 5月, 2011 1 次提交
    • L
      sanitize <linux/prefetch.h> usage · 268bb0ce
      由 Linus Torvalds 提交于 
      Commit e66eed65 ("list: remove prefetching from regular list
iterators") removed the include of prefetch.h from list.h, which
uncovered several cases that had apparently relied on that rather
obscure header file dependency.

So this fixes things up a bit, using

   grep -L linux/prefetch.h $(git grep -l '[^a-z_]prefetchw*(' -- '*.[ch]')
   grep -L 'prefetchw*(' $(git grep -l 'linux/prefetch.h' -- '*.[ch]')

to guide us in finding files that either need <linux/prefetch.h>
inclusion, or have it despite not needing it.

There are more of them around (mostly network drivers), but this gets
many core ones.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      268bb0ce
  15. 10 3月, 2011 2 次提交
    • A
      x86/mm: Fix pgd_lock deadlock · a79e53d8
      由 Andrea Arcangeli 提交于 
      It's forbidden to take the page_table_lock with the irq disabled
or if there's contention the IPIs (for tlb flushes) sent with
the page_table_lock held will never run leading to a deadlock.

Nobody takes the pgd_lock from irq context so the _irqsave can be
removed.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NRik van Riel <riel@redhat.com>
Tested-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <201102162345.p1GNjMjm021738@imap1.linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a79e53d8
    • A
      x86/mm: Handle mm_fault_error() in kernel space · f8626854
      由 Andrey Vagin 提交于 
      mm_fault_error() should not execute oom-killer, if page fault
occurs in kernel space.  E.g. in copy_from_user()/copy_to_user().

This would happen if we find ourselves in OOM on a
copy_to_user(), or a copy_from_user() which faults.

Without this patch, the kernels hangs up in copy_from_user(),
because OOM killer sends SIG_KILL to current process, but it
can't handle a signal while in syscall, then the kernel returns
to copy_from_user(), reexcute current command and provokes
page_fault again.

With this patch the kernel return -EFAULT from copy_from_user().

The code, which checks that page fault occurred in kernel space,
has been copied from do_sigbus().

This situation is handled by the same way on powerpc, xtensa,
tile, ...
Signed-off-by: NAndrey Vagin <avagin@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@kernel.org>
LKML-Reference: <201103092322.p29NMNPH001682@imap1.linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      f8626854
  17. 27 10月, 2010 2 次提交
  19. 21 10月, 2010 1 次提交
  21. 20 10月, 2010 1 次提交
  23. 15 10月, 2010 1 次提交
    • F
      x86: Barf when vmalloc and kmemcheck faults happen in NMI · ebc8827f
      由 Frederic Weisbecker 提交于 
      In x86, faults exit by executing the iret instruction, which then
reenables NMIs if we faulted in NMI context. Then if a fault
happens in NMI, another NMI can nest after the fault exits.

But we don't yet support nested NMIs because we have only one NMI
stack. To prevent from that, check that vmalloc and kmemcheck
faults don't happen in this context. Most of the other kernel faults
in NMIs can be more easily spotted by finding explicit
copy_from,to_user() calls on review.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
      ebc8827f
  25. 08 10月, 2010 1 次提交
    • A
      x86: HWPOISON: Report correct address granuality for huge hwpoison faults · f672b49b
      由 Andi Kleen 提交于 
      An earlier patch fixed the hwpoison fault handling to encode the
huge page size in the fault code of the page fault handler.

This is needed to report this information in SIGBUS to user space.

This is a straight forward patch to pass this information
through to the signal handling in the x86 specific fault.c

Cc: x86@kernel.org
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: fengguang.wu@intel.com
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
      f672b49b
  27. 27 8月, 2010 2 次提交
  29. 14 8月, 2010 1 次提交
    • L
      x86: don't send SIGBUS for kernel page faults · 96054569
      由 Linus Torvalds 提交于 
      It's wrong for several reasons, but the most direct one is that the
fault may be for the stack accesses to set up a previous SIGBUS.  When
we have a kernel exception, the kernel exception handler does all the
fixups, not some user-level signal handler.

Even apart from the nested SIGBUS issue, it's also wrong to give out
kernel fault addresses in the signal handler info block, or to send a
SIGBUS when a system call already returns EFAULT.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      96054569
  31. 23 11月, 2009 1 次提交
  33. 21 9月, 2009 1 次提交
    • I
      perf: Do the big rename: Performance Counters -> Performance Events · cdd6c482
      由 Ingo Molnar 提交于 
      Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )
Suggested-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      cdd6c482
  35. 16 9月, 2009 1 次提交
  37. 30 8月, 2009 1 次提交
  39. 11 7月, 2009 1 次提交
    • R
      x86: Remove spurious printk level from segfault message · a1a08d1c
      由 Roland Dreier 提交于 
      Since commit 5fd29d6c ("printk: clean up handling of log-levels
and newlines"), the kernel logs segfaults like:

    <6>gnome-power-man[24509]: segfault at 20 ip 00007f9d4950465a sp 00007fffbb50fc70 error 4 in libgobject-2.0.so.0.2103.0[7f9d494f7000+45000]

with the extra "<6>" being KERN_INFO.  This happens because the
printk in show_signal_msg() started with KERN_CONT and then
used "%s" to pass in the real level; and KERN_CONT is no longer
an empty string, and printk only pays attention to the level at
the very beginning of the format string.

Therefore, remove the KERN_CONT from this printk, since it is
now actively causing problems (and never really made any
sense).
Signed-off-by: NRoland Dreier <roland@digitalvampire.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <874otjitkj.fsf@shaolin.home.digitalvampire.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a1a08d1c
  41. 09 7月, 2009 1 次提交
  43. 29 6月, 2009 1 次提交
  45. 22 6月, 2009 1 次提交
  47. 16 6月, 2009 1 次提交
    • I
      x86: mm: Read cr2 before prefetching the mmap_lock · 5dfaf90f
      由 Ingo Molnar 提交于 
      Prefetch instructions can generate spurious faults on certain
models of older CPUs. The faults themselves cannot be stopped
and they can occur pretty much anywhere - so the way we solve
them is that we detect certain patterns and ignore the fault.

There is one small path of code where we must not take faults
though: the #PF handler execution leading up to the reading
of the CR2 (the faulting address). If we take a fault there
then we destroy the CR2 value (with that of the prefetching
instruction's) and possibly mishandle user-space or
kernel-space pagefaults.

It turns out that in current upstream we do exactly that:

	prefetchw(&mm->mmap_sem);

	/* Get the faulting address: */
	address = read_cr2();

This is not good.

So turn around the order: first read the cr2 then prefetch
the lock address. Reading cr2 is plenty fast (2 cycles) so
delaying the prefetch by this amount shouldnt be a big issue
performance-wise.

[ And this might explain a mystery fault.c warning that sometimes
  occurs on one an old AMD/Semptron based test-system i have -
  which does have such prefetch problems. ]

Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
LKML-Reference: <20090616030522.GA22162@Krystal>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      5dfaf90f
  49. 15 6月, 2009 1 次提交
    • V
      x86: add hooks for kmemcheck · f8561296
      由 Vegard Nossum 提交于 
      The hooks that we modify are:
- Page fault handler (to handle kmemcheck faults)
- Debug exception handler (to hide pages after single-stepping
  the instruction that caused the page fault)

Also redefine memset() to use the optimized version if kmemcheck is
enabled.

(Thanks to Pekka Enberg for minimizing the impact on the page fault
handler.)

As kmemcheck doesn't handle MMX/SSE instructions (yet), we also disable
the optimized xor code, and rely instead on the generic C implementation
in order to avoid false-positive warnings.
Signed-off-by: NVegard Nossum <vegardno@ifi.uio.no>

[whitespace fixlet]
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

[rebased for mainline inclusion]
Signed-off-by: NVegard Nossum <vegardno@ifi.uio.no>
      f8561296
  51. 11 6月, 2009 1 次提交
  53. 03 5月, 2009 1 次提交
  55. 09 4月, 2009 1 次提交
  57. 06 4月, 2009 2 次提交
  59. 30 3月, 2009 2 次提交
  61. 22 2月, 2009 1 次提交
  63. 21 2月, 2009 4 次提交