Convert the imx2_wdt driver to the new watchdog core api.
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This watchdog driver will be working on IMX2+, Vybrid, LS1, LS2+
platforms, and will be in different endianness mode in those SoCs:

SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
IMX2+            LE                    LE
Vybird           LE                    LE
LS1              LE                    BE
LS2              LE                    LE

Other possible SoCs:
SoCs         CPU endian mode      WDT endian mode
------------------------------------------------
Soc1             BE                    BE
Soc2             BE                    LE

And also the watchdog's registers will be 32-bits for some versions,
and though it is 16-bits in IMX2+, Vybird and LS+.

Using the regmap APIs, could be more easy to support different
endianness and also more easy to support 32-bits version...
Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Replace clk_enable() and clk_disable() calls with
clk_prepare_enable() and clk_disable_unprepare()
to get ready for the migration to the common clock
framework.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

On some AR934x based systems, where the frequency of
the AHB bus is relatively high, the built-in watchdog
causes a spurious restart when it gets enabled.

The possible cause of these restarts is that the timeout
value written into the TIMER register does not reaches
the hardware in time.

Add an explicit delay into the ath79_wdt_enable function
to avoid the spurious restarts.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: <stable@vger.kernel.org>

This patch removes platform_set_drvdata() which is not used in
the driver.
Signed-off-by: NAlexander Shiyan <shc_work@mail.ru>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use the prescaler index, rather than its value, to configure the watchdog.
This will prevent a mismatch with the prescaler used to calculate the cycles.
Signed-off-by: NPer Gundberg <per.gundberg@icomera.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Reviewed-by: NMichael Brunner <michael.brunner@kontron.com>
Tested-by: NMichael Brunner <michael.brunner@kontron.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: stable <stable@vger.kernel.org>

When compiling sunxi_defconfig while using C=2, the following error
causes the compilation to fail:

    drivers/watchdog/sunxi_wdt.c:60:15: error: constant 0b0001 is not a valid number

Fix it by using hex notation instead of the non-standard binary one
Signed-off-by: NEmilio Lopez <emilio@elopez.com.ar>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exits.

This change was suggested by Thomas Gleixner.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier i,t,ex;
@@
struct t i = { .remove = ex, };

@@
identifier r.ex;
@@
ex(...) {
  <...
- del_timer
+ del_timer_sync
    (...)
  ...>
}
// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

According to its Kconfig help text, the sbc8360 watchdog driver is
only used on the Axiomtek SBC8360 single-board computer. This piece of
hardware is 32-bit x86 so the driver is useless beyond X86_32.
Signed-off-by: NJean Delvare <jdelvare@suse.de>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Len field is already set to zero, but not the from field which is sent
as 0xfffffffffffffe00.  This makes no sense, and may cause confuse
server implementations doing sanity checks (qemu-nbd is an example.)
Signed-off-by: NHani Benhabiles <hani@linux.com>
Cc: Paul Clements <paul.clements@us.sios.com>
Cc: Paul Clements <Paul.Clements@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some sysrq handlers can run for a long time, because they dump a lot of
data onto a serial console.  Having RCU stall warnings pop up in the
middle of them only makes the problem worse.

This patch temporarily disables RCU stall warnings while a sysrq request
is handled.
Signed-off-by: NRik van Riel <riel@redhat.com>
Suggested-by: NPaul McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Madper Xie <cxie@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Echoing values into /proc/sysrq-trigger seems to be a popular way to get
information out of the kernel.  However, dumping information about
thousands of processes, or hundreds of CPUs to serial console can result
in IRQs being blocked for minutes, resulting in various kinds of cascade
failures.

The most common failure is due to interrupts being blocked for a very
long time.  This can lead to things like failed IO requests, and other
things the system cannot easily recover from.

This problem is easily fixable by making __handle_sysrq use RCU instead
of spin_lock_irqsave.

This leaves the warning that RCU grace periods have not elapsed for a
long time, but the system will come back from that automatically.

It also leaves sysrq-from-irq-context when the sysrq keys are pressed,
but that is probably desired since people want that to work in
situations where the system is already hosed.

The callers of register_sysrq_key and unregister_sysrq_key appear to be
capable of sleeping.
Signed-off-by: NRik van Riel <riel@redhat.com>
Reported-by: NMadper Xie <cxie@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This typedef is unnecessary and should just be removed.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers using these two
interfaces need to be updated to use the new pci_enable_msi_range() or
pci_enable_msi_exact() and pci_enable_msix_range() or
pci_enable_msix_exact() interfaces.

The patch has no runtime effect.
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle
it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle
it as const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When RTC CLKTRCTRL bit is configured in HW_AUTO, module goes to sleep in
IDLE state.

The Alarm SWakeup event can be used to wakeup the RTC when it is in IDLE
state.  In order to do so, the alarm needs to be set and enabled before
RTC enters the IDLE state.  Also the wakeup generation for alarm/timer
event needs to be set (bits [1:0] in RTC_IRQWAKEEN register).

Currently RTC_IRQWAKEEN bits are set only in suspend/resume paths.  With
this ALARM interrupts are not generated when it enters IDLE state.  So
programming the RTC_IRQWAKEEN bits when ever ALARM is set.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Acked-by: NSekhar Nori <nsekhar@ti.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The rtc user must wait at least 1 sec between each time/calandar update
(see atmel's datasheet chapter "Updating Time/Calendar").

Use the 1Hz interrupt to update the at91_rtc_upd_rdy flag and wait for
the at91_rtc_wait_upd_rdy event if the rtc is not ready.

This patch fixes a deadlock in an uninterruptible wait when the RTC is
updated more than once every second.  AFAICT the bug is here from the
beginning, but I think we should at least backport this fix to 3.10 and
the following longterm and stable releases.
Signed-off-by: NBoris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: NBryan Evenson <bevenson@melinkcorp.com>
Tested-by: NBryan Evenson <bevenson@melinkcorp.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This enables the setting of a custom clock name for the clock provided by
the hym8563 rtc.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NMike Turquette <mturquette@linaro.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The RTC framework does not let you return an error once a call to
devm_rtc_device_register has succeeded.  Avoid doing that when the IRQ
request fails as we can still support reading/writing the clock without
the IRQ.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Reported-by: NAles Novak <alnovak@suse.cz>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Newer versions of OMAP RTC IP such as those found in AM335x and DRA7x
need an explicit enable of 32khz functional clock which ticks the RTC.

AM335x support was working so far because of settings done in U-Boot.
However, the DRA7x U-Boot does no such enable of 32khz clock and this
patch is need to get the RTC to work on DRA7x at least.  In general, it
is better to not depend on settings done in U-Boot.

Thanks to Lokesh Vutla for noticing this.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use BIT() macro for RTC_HAS_<FEATURE> defines instead of hand-writing
bit masks.

Use BIT() macros for register bit field definitions.

While at it, fix indentation done using spaces.

No functional change in this patch.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove multiple superfluous device id checks.  Since an id_table is
present in the driver probe() should never encounter an empty device id
entry.  In case of OF style match, of_match_device() returns an matching
entry.

For paranoia sake, check for device id entry once and fail probe() if none
is found.  This is much better than checking for it multiple times.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add the RTC driver for DA9063.

[akpm@linux-foundation.org: coding-style tweaks]
Signed-off-by: NOpensource [Steve Twiss] <stwiss.opensource@diasemi.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Mark Brown <broonie@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: David Dajun Chen <david.chen@diasemi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add driver for SPI RTC Microchip MCP795.  Only supports saving/loading
time from the chip (i.  e.  no alarms/power events/ID).
Signed-off-by: NJosef Gajdusek <atx@atx.name>
Cc: Jingoo Han <jg1.han@samsung.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid the potential race condition by avoiding bailing out of driver in
probe after registering with rtc subsystem

Also the set_alarm , read_alarm and alarm_irq_enable returns error if irq
registration fails in probe.

Also the sysfs will not create entry for alarm if irq registration fails
in probe.
Signed-off-by: NRaghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the following build errors reported by kbuild test robot by selecting
REGMAP_SPI in Kconfig file

drivers/built-in.o: In function `ds1343_probe':
rtc-ds1343.c:(.text+0x1baf8f): undefined reference to `devm_regmap_init_spi'
Signed-off-by: NRaghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Acked-by: NAlessandro Zummo <a.zummo@towertech.it>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRaghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle it as
const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle it as
const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle it as
const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle it as
const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Acked-by: NHeiko Stbner <heiko@sntech.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make of_device_id array const, because all OF functions handle it as
const.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Setting the alarm to a time not on a minute boundary results in repeated
interrupts being generated by the DA9052/3 PMIC device until the kernel
RTC core sees that the alarm has rung.  Sometimes the number and frequency
of interrupts can cause the kernel to disable the IRQ line used by the
DA9052/3 PMIC with disasterous consequences.  This patch fixes the
problem.

Even though the DA9052/3 PMIC is capable generating periodic interrupts,
ie TICKS, the method used to distinguish RTC_AF from RTC_PF events was
flawed and can not work in conjunction with the regmap_irq kernel core.
Thus that flawed detection has also been removed by the DA9052/3 PMIC RTC
driver's irq handler, so that it no longer reports the wrong type of event
to the kernel RTC core.

The internal static functions within the DA9052/3 PMIC RTC driver have
been changed to pass the 'da9052_rtc' structure instead of the 'da9052'
because there is no backwards pointer from the 'da9052' structure.

This patch fixes the three issues described above.  The first is serious
because usiing the RTC alarm set to a non minute boundary will eventually
cause all component drivers that depend on the interrupt line to fail.
The solution adopted is to round up to alarm time to the next highest
minute.

The second bug, reporting a RTC_PF event instead of an RTC_AF event turns
out to not matter with the current implementation of the kernel RTC core
as it seems to ignore the event type.  However, should that change in the
future it is better to fix the issue now and not have 'problems waiting to
happen'

The third set of changes are to make the da9052_rtc structure available to
all the local internal functions in the driver.  This was done during
testing so that diagnostic data could be stored there.  Should the
solution to the first issue be found not acceptable, then the alternative
of using the TICKS interrupt at the fixed one second interval in order to
step to the exact second of the requested alarm requires an extra (alarm
time) piece of data to be stored.  In devices that use the alarm function
to wake up from sleep, accuracy to the second will result in the device
being awake for up to nearly a minute longer than expected.
Signed-off-by: NAnthony Olech <anthony.olech.opensource@diasemi.com>
Cc: David Dajun Chen <dchen@diasemi.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing of_node_put() to decrement the reference count.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use of_get_child_by_name() to obtain reference to charger node instead of
of_find_node_by_name() which can walk outside of the parent node.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>