- 06 1月, 2006 40 次提交
-
-
由 Michael Burian 提交于
Add code to handle case where board firmware does not start the RTC. Signed-off-by: NJean Delvare <khali@linux-fr.org> CC: James Chapman <jchapman@katalix.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mark M. Hoffman 提交于
This patch tweaks i2c-i801.c so that the driver always sets the SMBAUXCTL register (which enables/disables PEC) explicitly before each transaction. Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kris Katterjohn 提交于
These patches add the header linux/if_ether.h and change 1500 to ETH_DATA_LEN in some files. Signed-off-by: NKris Katterjohn <kjak@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Purdie 提交于
Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
kill the socket_shutdown()/shutdown_socket() confusion by making it one single function. move cs_socket_put() in there. nicer to read and smaller: original: text data bss dec hex filename 25181 1076 32 26289 66b1 drivers/pcmcia/pcmcia_core.ko patched: text data bss dec hex filename 24973 1076 32 26081 65e1 drivers/pcmcia/pcmcia_core.ko Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Convert users of kmalloc and memset to kzalloc Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Do not wildly probe the IO ports we're trying to use on PARISC. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Export the stored values instead of re-reading everything in the socket information sysfs files, and make them accessible to all users, not only to root. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Vitaly Bordug 提交于
This adds PCMCIA support for both MPC885ADS and MPC866ADS. This is established not together with FADS, because 885 does not have io_block_mapping() for BCSR area. Also, some cleanups done both for 885ADS and MBX. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Vitaly Bordug 提交于
This fixes misconfiguration that could result in odd work of some old CF cards. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Some PCMCIA sockets have statically mapped memory windows, but dynamically mapped IO windows. Using the "nonstatic" socket library is inpractical for them, as they do neither need a resource database (as we can trust the kernel resource database on m68k and ppc) nor lots of other features of that library. Let them get a small "iodyn" socket library (105 lines of code) instead. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Update the PCMCIA sound drivers to handle the recent changes to the PCMCIA core. A part of this merge was done by Takashi Iwai <tiwai@suse.de>. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove the old "detach" mechanism as it is unused now. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Merge the suspend and resume methods for 16-bit PCMCIA cards into the device model -- for both runtime power management and suspend to ram/disk. Bugfix in ds.c by Richard Purdie Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Make the bridge specific initialization code config options depending on CONFIG_EMBEDDED. Config options for TI/EnE, Toshiba, Ricoh and O2Micro are available. Disabling all of the specific tweaks cuts off more than half of yenta_socket.ko. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Andrew Morton 提交于
Also return a value if CONFIG_PCMCIA_PROBE is not set. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Add a return value to pcmcia_validate_mem. Only if we have enough memory available to map the CIS, we should proceed in trying to determine information about the device. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
The .get_socket callback is never used by the PCMCIA core, therefore remove it. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove the register_callback declaration in struct pccard_operations as it is unused. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Daniel Ritz 提交于
Don't waste cpu time in yenta interrupt handler when the interrupt was for another device. Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Pavel Machek 提交于
Fix macro abuse in pcmcia. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Linus Torvalds 提交于
-
由 Tony Luck 提交于
arch/ia64/kernel/setup.c: In function `show_cpuinfo': arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 12) arch/ia64/kernel/setup.c:576: warning: long unsigned int format, different type arg (arg 13) Introduced by 95235ca2Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Luis F. Ortiz 提交于
I have recently been switching from using 2.4.32 on my trusty old Sparc Blade 100 to using 2.6.15 . Some of the problems I ran into were distorted video when the console was active (missing first character, skipped dots) and when running X windows (colored snow, stripes, missing pixels). A quick examination of the 2.6 versus 2.4 source for the ATY driver revealed alot of changes. A closer look at the code/data for the 64GR/XL chip revealed two minor "typos" that the rewriter(s) of the code made. The first is a incorrect clock value (230 .vs. 235) and the second is a missing flag (M64F_SDRAM_MAGIC_PLL). Making both these changes seems to have fixed my problem. I tend to think the 235 value is the correct one, as there is a 29.4 Mhz clock crystal close to the video chip and 235.2 (29.4*8) is too close to 235 to make it a coincidence. The flag for M64F_SDRAM_MAGIC_PLL was dropped during the changes made by adaplas in file revision 1.72 on the old bitkeeper repository. The change relating to the clock rate has been there forever, at least in the 2.6 tree. I'm not sure where to look for the old 2.5 tree or if anyone cares when it happened. On SPARC Blades 100's, which use the ATY MACH64GR video chipset, the clock crystal frequency is 235.2 Mhz, not 230 Mhz. The chipset also requires the use of M64F_SDRAM_MAGIC_PLL in order to setup the PLL properly for the DRAM. Signed-off-by: NLuis F. Ortiz <lfo@Polyad.Org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yasuyuki Kozakai 提交于
HOPLIMIT metric is appropriate to TCP reset sent by REJECT target than hard-coded max TTL. Thanks to David S. Miller for hint. Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
CC [M] net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.o net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c: In function 'ipv4_refrag': net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c:198: error: dereferencing pointer to incomplete type make[3]: *** [net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.o] Error 1 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The original ipv6_find_hdr() finds the specified header in IPv6 packets. This makes it possible to get transport header so that we can kill similar loop in ip6_match_packet(). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Call POST_ROUTING hook before fragmentation to get rid of the okfn use in ip_refrag and save the useless fragmentation/defragmentation step when NAT is used. The patch introduces one user-visible change, the POSTROUTING chain in the mangle table gets entire packets, not fragments, which should simplify use of the MARK and CLASSIFY targets for queueing as a nice side-effect. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
okfn should only be used from different contexts to avoid deep call chains, i.e. by nf_queue. Acked-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Properly dump the helper name instead of internal kernel data. Based on patch by Marcus Sundberg <marcus@ingate.com>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Fix netfilter module_param types and permissions. Also fix an off-by-one in the ipt_ULOG nlbufsiz < 128k check. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-