Turning on receive and/or transmit checksum offload support
on the OSA card requires 2 commands:
1. start command which replies with available features
2. enable command to turn on selected features.

The current version does not check the reply of the start
command and simply uses the returned value to enable
offload features. When the start command returns zero, this
leads to a situation where no checksum offload
is turned on by the hardware. Even worse no error
indication is returned. The Linux kernel assumes
the OSA card performs RX/TX checksum offload, but the hardware
does not perform any checksum verification at all.

This patch checks the return of the start and enable
command responses from the hardware and turns off
checksum offloading if the commands fails or does not
respond with the correct bit setting.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rework the RX/TX checksum offloading command sequence to use
the provided function call back mechanims to return card
data to the device driver.
Signed-off-by: NThomas Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: NJulian Wiedmann <jwi@linux.vnet.ibm.com>
Reviewed-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
More flexible BPF cb access

This patch improves BPF's cb access by allowing b/h/w/dw
access variants on it. For details, please see individual
patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When structs are used to store temporary state in cb[] buffer that is
used with programs and among tail calls, then the generated code will
not always access the buffer in bpf_w chunks. We can ease programming
of it and let this act more natural by allowing for aligned b/h/w/dw
sized access for cb[] ctx member. Various test cases are attached as
well for the selftest suite. Potentially, this can also be reused for
other program types to pass data around.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, when calling convert_ctx_access() callback for the various
program types, we pass in insn->dst_reg, insn->src_reg, insn->off from
the original instruction. This information is needed to rewrite the
instruction that is based on the user ctx structure into a kernel
representation for the ctx. As we'd like to allow access size beyond
just BPF_W, we'd need also insn->code for that in order to decode the
original access size. Given that, lets just pass insn directly to the
convert_ctx_access() callback and work on that to not clutter the
callback with even more arguments we need to pass when everything is
already contained in insn. So lets go through that once, no functional
change.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ursula Braun says:

====================
net/smc: fix typo and clc-bug

I received 2 bug reports for my new AF_SMC-code. Here are the fixes for them.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When creating an SMC connection, there is a CLC (connection layer control)
handshake to prepare for RDMA traffic. The corresponding code is part of
commit 0cfdd8f9 ("smc: connection and link group creation").
Mac addresses to be exchanged in the handshake are copied with a wrong
length of 12 instead of 6 bytes. Following code overwrites the wrongly
copied code, but nevertheless the correct length should already be used for
the preceding mac address copying. Use ETH_ALEN for the memcpy length with
mac addresses.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Fixes: 0cfdd8f9 ("smc: connection and link group creation")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When introducing the new socket family AF_SMC in
commit ac713874 ("smc: establish new socket family"),
a typo in af_family_clock_key_strings has slipped in.
This patch repairs it.
Signed-off-by: NUrsula Braun <ubraun@linux.vnet.ibm.com>
Fixes: ac713874 ("smc: establish new socket family")
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Initialize mbox lock and list for mgmt dev to avoid NULL pointer
dereference when cxgb_set_vf_mac is called.

And also allocate memory for private data while allocating mgmt
netdev.
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netif_wake_subqueue() is duplicating the same thing that netif_tx_wake_queue()
does, so make it call it directly after looking up the queue from the index.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

>From struct ethtool_ops:

        int     (*set_rxfh)(struct net_device *, const u32 *indir,
                            const u8 *key, const u8 hfunc);

Change function arg of hfunc to const type.

V2: Fixed indentation.
Signed-off-by: NRobert Richter <rrichter@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 712c3185 ("net: thunderx: Program LMAC credits based on MTU")
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes the following sparse warning:

drivers/net/ethernet/sfc/efx.c:2337:5: warning:
 symbol 'efx_get_phys_port_id' was not declared. Should it be static?
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Two AF_* families adding entries to the lockdep tables
at the same time.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge fixes from Andrew Morton:
 "27 fixes.

  There are three patches that aren't actually fixes. They're simple
  function renamings which are nice-to-have in mainline as ongoing net
  development depends on them."

* akpm: (27 commits)
  timerfd: export defines to userspace
  mm/hugetlb.c: fix reservation race when freeing surplus pages
  mm/slab.c: fix SLAB freelist randomization duplicate entries
  zram: support BDI_CAP_STABLE_WRITES
  zram: revalidate disk under init_lock
  mm: support anonymous stable page
  mm: add documentation for page fragment APIs
  mm: rename __page_frag functions to __page_frag_cache, drop order from drain
  mm: rename __alloc_page_frag to page_frag_alloc and __free_page_frag to page_frag_free
  mm, memcg: fix the active list aging for lowmem requests when memcg is enabled
  mm: don't dereference struct page fields of invalid pages
  mailmap: add codeaurora.org names for nameless email commits
  signal: protect SIGNAL_UNKILLABLE from unintentional clearing.
  mm: pmd dirty emulation in page fault handler
  ipc/sem.c: fix incorrect sem_lock pairing
  lib/Kconfig.debug: fix frv build failure
  mm: get rid of __GFP_OTHER_NODE
  mm: fix remote numa hits statistics
  mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}
  ocfs2: fix crash caused by stale lvb with fsdlm plugin
  ...

Pull networking fixes from David Miller:

 1) Fix rtlwifi crash, from Larry Finger.

 2) Memory disclosure in appletalk ipddp routing code, from Vlad
    Tsyrklevich.

 3) r8152 can erroneously split an RX packet into multiple URBs if the
    Rx FIFO is not empty when we suspend. Fix this by waiting for the
    FIFO to empty before suspending. From Hayes Wang.

 4) Two GRO fixes (enter slow path when not enough SKB tail room exists,
    disable frag0 optimizations when there are IPV6 extension headers)
    from Eric Dumazet and Herbert Xu.

 5) A series of mlx5e bug fixes (do source udp port offloading for
    tunnels properly, Ip fragment matching fixes, handling firmware
    errors properly when installing TC rules, etc.) from Saeed Mahameed,
    Or Gerlitz, Roi Dayan, Hadar Hen Zion, Gil Rockah, and Daniel
    Jurgens.

 6) Two VRF fixes from David Ahern (don't skip multipath selection for
    VRF paths, disallow VRF to be configured with table ID 0).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  net: vrf: do not allow table id 0
  net: phy: marvell: fix Marvell 88E1512 used in SGMII mode
  sctp: Fix spelling mistake: "Atempt" -> "Attempt"
  net: ipv4: Fix multipath selection with vrf
  cgroup: move CONFIG_SOCK_CGROUP_DATA to init/Kconfig
  gro: use min_t() in skb_gro_reset_offset()
  net/mlx5: Only cancel recovery work when cleaning up device
  net/mlx5e: Remove WARN_ONCE from adaptive moderation code
  net/mlx5e: Un-register uplink representor on nic_disable
  net/mlx5e: Properly handle FW errors while adding TC rules
  net/mlx5e: Fix kbuild warnings for uninitialized parameters
  net/mlx5e: Set inline mode requirements for matching on IP fragments
  net/mlx5e: Properly get address type of encapsulation IP headers
  net/mlx5e: TC ipv4 tunnel encap offload error flow fixes
  net/mlx5e: Warn when rejecting offload attempts of IP tunnels
  net/mlx5e: Properly handle offloading of source udp port for IP tunnels
  gro: Disable frag0 optimization on IPv6 ext headers
  gro: Enter slow-path if there is no tailroom
  mlx4: Return EOPNOTSUPP instead of ENOTSUPP
  net/af_iucv: don't use paged skbs for TX on HiperSockets
  ...

Pull crypto fix from Herbert Xu:
 "This fixes a regression in aesni that renders it useless if it's
  built-in with a modular pcbc configuration"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni - Fix failure when built-in with modular pcbc

Simon Horman says:

====================
net/sched: cls_flower: Support matching ARP

Add support for support matching on ARP operation, and hardware and
protocol addresses for Ethernet hardware and IPv4 protocol addresses.

Changes since RFC:
* None other than dropping RFC designation after positive feedback from Jiri
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support matching on ARP operation, and hardware and protocol addresses
for Ethernet hardware and IPv4 protocol addresses.

Example usage:

tc qdisc add dev eth0 ingress

tc filter add dev eth0 protocol arp parent ffff: flower indev eth0 \
	arp_op request arp_sip 10.0.0.1 action drop
tc filter add dev eth0 protocol rarp parent ffff: flower indev eth0 \
	arp_op reply arp_tha 52:54:3f:00:00:00/24 action drop
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow dissection of (R)ARP operation hardware and protocol addresses
for Ethernet hardware and IPv4 protocol addresses.

There are currently no users of FLOW_DISSECTOR_KEY_ARP.
A follow-up patch will allow FLOW_DISSECTOR_KEY_ARP to be used by the
flower classifier.
Signed-off-by: NSimon Horman <simon.horman@netronome.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit: bc1f4470 - net: make ndo_get_stats64 a void function
and
Commit: 6a8162e9 - net: netcp: store network statistics in 64 bits.

The commit 6a8162e9 adds ndo_get_stats64 function as per old
signature which causes compilation error:

drivers/net/ethernet/ti/netcp_core.c:1951:28: error:
initialization from incompatible pointer type
  .ndo_get_stats64        = netcp_get_stats,

Hence correct netcp_get_stats function signature as per
the latest definition.
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Fixes: 6a8162e9 ("net: netcp: store network statistics in 64 bits")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Frank reported that vrf devices can be created with a table id of 0.
This breaks many of the run time table id checks and should not be
allowed. Detect this condition at create time and fail with EINVAL.

Fixes: 193125db ("net: Introduce VRF device driver")
Reported-by: NFrank Kellermann <frank.kellermann@atos.net>
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an Marvell 88E1512 PHY is connected to a nic in SGMII mode, the
fiber page is used for the SGMII host-side connection.  The PHY driver
notices that SUPPORTED_FIBRE is set, so it tries reading the fiber page
for the link status, and ends up reading the MAC-side status instead of
the outgoing (copper) link.  This leads to incorrect results reported
via ethtool.

If the PHY is connected via SGMII to the host, ignore the fiber page.
However, continue to allow the existing power management code to
suspend and resume the fiber page.

Fixes: 6cfb3bcc ("Marvell phy: check link status in case of fiber link.")
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in WARN_ONCE message
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

fib_select_path does not call fib_select_multipath if oif is set in the
flow struct. For VRF use cases oif is always set, so multipath route
selection is bypassed. Use the FLOWI_FLAG_SKIP_NH_OIF to skip the oif
check similar to what is done in fib_table_lookup.

Add saddr and proto to the flow struct for the fib lookup done by the
VRF driver to better match hash computation for a flow.

Fixes: 613d09b3 ("net: Use VRF device index for lookups on TX")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: dsa: Implement ndo_get_phys_port_name()

This patch series implements ndo_get_phys_port_name() so we can revert
ndo_get_phys_id() which was (ab)used in the DSA layer.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit 3a543ef4 ("net: dsa:
Implement ndo_get_phys_port_id") since it misuses the purpose of
ndo_get_phys_port_id(). We have ndo_get_phys_port_name() to do the
correct thing for us now.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Return the physical port number of a DSA created network device using
ndo_get_phys_port_name().
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We now 'select SOCK_CGROUP_DATA' but Kconfig complains that this is
not right when CONFIG_NET is disabled and there is no socket interface:

warning: (CGROUP_BPF) selects SOCK_CGROUP_DATA which has unmet direct dependencies (NET)

I don't know what the correct solution for this is, but simply removing
the dependency on NET from SOCK_CGROUP_DATA by moving it out of the
'if NET' section avoids the warning and does not produce other build
errors.

Fixes: 483c4933 ("cgroup: Fix CGROUP_BPF config")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the new DTS bindings for DSA (dsa2), the "ethernet" and "link"
phandles are respectively mandatory and exclusive to CPU port and DSA
link device tree nodes.

Simplify dsa2.c a bit by checking the presence of such phandle instead
of checking the redundant "label" property.

Then the Linux philosophy for Ethernet switch ports is to expose them to
userspace as standard NICs by default. Thus use the standard enumerated
"eth%d" device name if no "label" property is provided for a user port.
This allows to save DTS files from subjective net device names.

If one wants to rename an interface, udev rules can be used as usual.

Of course the current behavior is unchanged, and the optional "label"
property for user ports has precedence over the enumerated name.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On 32bit arches, (skb->end - skb->data) is not 'unsigned int',
so we shall use min_t() instead of min() to avoid a compiler error.

Fixes: 1272ce87 ("gro: Enter slow-path if there is no tailroom")
Reported-by: Nkernel test robot <fengguang.wu@intel.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox mlx5 fixes and cleanups 2017-01-10

This series includes some mlx5e general cleanups from Daniel, Gil, Hadar
and myself.
Also it includes some critical mlx5e TC offloads fixes from Or Gerlitz.

For -stable:
 - net/mlx5e: Remove WARN_ONCE from adaptive moderation code

   Although this fix doesn't affect any functionality, I thought it is
   better to clean this -WARN_ONCE- up for -stable in case someone hits
   such corner case.

Please apply and let me know if there's any problem.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not attempt to drain the health workqueue when unloading the device in
the recovery flow, this can cause a deadlock when the recovery work
tries to cancel itself with sync.

Because the work is no longer unconditionally canceled when unloading, it
must be explicitly canceled in the AER flow.

fixes: 689a248d ("net/mlx5: Cancel recovery work in remove flow")
Signed-off-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When trying to do interface down or changing interface configuration
under heavy traffic, some of the adaptive moderation corner cases can
occur and leave a WARN_ONCE call trace in the kernel log.

Those WARN_ONCE are meant for debug only, and should have been inserted
only under debug. We avoid such call traces by removing those WARN_ONCE.

Fixes: cb3c7fd4 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: NGil Rockah <gilr@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code before this patch registered uplink e-Switch representor
on nic_enable and unregistered on nic_cleanup, the right place
for this unregister is in nic_disable.

Fixes: 127ea380 ("net/mlx5: Add Representors registration API")
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Reviewed-by: NMohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the firmware returns an error (common example is an attempt to
add twice the same rule which is refused by the some FWs), we are not
properly derefing/cleaning few resources allocated on the way.
Examples are vport vlan deref under eswitch vlan offloads, and encap
entry/neighbour deref under eswitch encapsulation offloads, fix that.

Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads')
Fixes: 8b32580d ('net/mlx5e: Add TC vlan action for SRIOV offloads')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

kbuild warn about parameters that may be used uninitialized, fix it.

Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads')
Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For e-switch level matching on packets being an IP fragment, we
need to make sure the source vport inline mode is L3, fix that.

Fixes: 3f7d0eb4 ('net/mlx5e: Offload TC matching on packets being IP fragments')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As done elsewhere in our TC/flower offload code, the address type of
the encapsulation IP headers should be realized accroding to the
addr_type field of the encapsulation control dissector key, do that.

Fixes: bbd00f7e ('net/mlx5e: Add TC tunnel release action for SRIOV offloads')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the route lookup fails we should return the actual error.

When the neigh isn't valid, we should return -EOPNOTSUPP as done
in similar cases along the code.

When the offload can't take place as of invalid neigh etc, we
must release the neigh.

Fixes: a54e20b4 ('net/mlx5e: Add basic TC tunnel set action for SRIOV offloads')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>