It is platform/output depenedent when exactly the pipe will start
running. Sometimes we just need the (cpu) pipe enabled, in other cases
the pch transcoder is enough and in yet other cases the (DP) port is
sending the frame start signal.

In a perfect world we'd put the drm_crtc_vblank_on call exactly where
the pipe starts running, but due to cloning and similar things this
will get messy. And the current approach of picking the most
conservative place for all combinations also doesn't work since that
results in legit vblank waits (in encoder->enable hooks, e.g. the 2
vblank waits for sdvo) failing.

Completely going back to the old world before

commit 51e31d49
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Sep 15 12:36:02 2014 +0200

    drm/i915: Use generic vblank wait

isn't great either since screaming when the vblank wait work because
the pipe is off is kinda nice.

Pick a compromise and move the drm_crtc_vblank_on right before the
encoder->enable call. This is a lie on some outputs/platforms, but
after the ->enable callback the pipe is guaranteed to run everywhere.
So not that bad really. Suggested by Ville.

v2: Same treatment for drm_crtc_vblank_off and encoder->disable: I've
missed the ibx pipe B select w/a, which also has a vblank wait in the
disable function (while the pipe is obviously still running).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This will allow us to set per-file, or even per-context, periods in the
future.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This reverts commit 371abae8.

This data seems unreliable and causing many issues and blocking other
teams and feature implementation. Safest way is to revert that for now.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88081
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88039
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87671
Cc: Vandana Kannan <vandana.kannan@intel.com>
Cc: Deepak M <m.deepak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch provides support to create write-combining virtual mappings of
GEM object. It intends to provide the same funtionality of 'mmap_gtt'
interface without the constraints and contention of a limited aperture
space, but requires clients handles the linear to tile conversion on their
own. This is for improving the CPU write operation performance, as with such
mapping, writes and reads are almost 50% faster than with mmap_gtt. Similar
to the GTT mmapping, unlike the regular CPU mmapping, it avoids the cache
flush after update from CPU side, when object is passed onto GPU.  This
type of mapping is specially useful in case of sub-region update,
i.e. when only a portion of the object is to be updated. Using a CPU mmap
in such cases would normally incur a clflush of the whole object, and
using a GTT mmapping would likely require eviction of an active object or
fence and thus stall. The write-combining CPU mmap avoids both.

To ensure the cache coherency, before using this mapping, the GTT domain
has been reused here. This provides the required cache flush if the object
is in CPU domain or synchronization against the concurrent rendering.
Although the access through an uncached mmap should automatically
invalidate the cache lines, this may not be true for non-temporal write
instructions and also not all pages of the object may be updated at any
given point of time through this mapping.  Having a call to get_pages in
set_to_gtt_domain function, as added in the earlier patch 'drm/i915:
Broaden application of set-domain(GTT)', would guarantee the clflush and
so there will be no cachelines holding the data for the object before it
is accessed through this map.

The drm_i915_gem_mmap structure (for the DRM_I915_GEM_MMAP_IOCTL) has been
extended with a new flags field (defaulting to 0 for existent users). In
order for userspace to detect the extended ioctl, a new parameter
I915_PARAM_MMAP_VERSION has been added for versioning the ioctl interface.

v2: Fix error handling, invalid flag detection, renaming (ickle)

v3: Rebase to latest drm-intel-nightly codebase

The new mmapping is exercised by igt/gem_mmap_wc,
igt/gem_concurrent_blit and igt/gem_gtt_speed.

Change-Id: Ie883942f9e689525f72fe9a8d3780c3a9faa769a
Signed-off-by: NAkash Goel <akash.goel@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Previously, this was restricted to only operate on bound objects - to
make pointer access through the GTT to the object coherent with writes
to and from the GPU. A second usecase is drm_intel_bo_wait_rendering()
which at present does not function unless the object also happens to
be bound into the GGTT (on current systems that is becoming increasingly
rare, especially for the typical requests from mesa). A third usecase is
a future patch wishing to extend the coverage of the GTT domain to
include objects not bound into the GGTT but still in its coherent cache
domain. For the latter pair of requests, we need to operate on the
object regardless of its bind state.

v2: After discussion with Akash, we came to the conclusion that the
get-pages was required in order for accurate domain tracking in the
corner cases (like the shrinker) and also useful for ensuring memory
coherency with earlier cached CPU mmaps in case userspace uses exotic
cache bypass (non-temporal) instructions.

v3: Fix the inactive object check.

v4: Rebase to latest drm-intel-nightly codebase
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NAkash Goel <akash.goel@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Use WARN_ONs (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I've written these long before we've had a reasonable docbook
structure, and naturally they've gone stale. Fix this up asap.
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

Haswell significantly improved the performance of sampler_c messages,
but the optimization appears to be off by default.  Later platforms
remove this bit, and apparently always enable the optimization.

Improves performance in "Counter Strike: Global Offensive" by 18%
at default settings on Iris Pro.

This may break sampling of paletted formats (P8/A8P8/P8A8).  It's
unclear whether it affects sampling of paletted formats in general,
or just the sample_c message (which is never used).

While libva does have support for using paletted formats (primarily
for OSDs), that support appears to have been broken for at least a
year, so I couldn't observe a regression from this:

I tried to get libva-intel to use paletted formats, and observe a
regression...but the only thing I found that used it was mplayer's OSD
(on screen display).  Even without my patch, the colors were totally
wrong with that, and it's according to a few distro wikis, that's been
the case for over a year.

If libva's code for paletted formats /is/ broken, they could always
add code to disable this bit using the command validator when fixing
it.

Further investigation from Haihao shows that libva mplayer OSD seems
to work at least on his setup (still unclear what's wron with Ken's),
and that it's not affected by this patch. Quoting the discussion
between Haihao and Ken:

> > > If you use "-vo gl" or "-vo xv", the OSD is solid white text with a black
> > > border around it.  I presume that it's supposed to be white with vaapi as
> > > well, but I guess I'm not entirely sure.
> > >
> > > It's possible that the optimization doesn't affect the palette as long as
> > > you never use sample_c with the paletted textures.
> >
> > I verified the palette takes effect in the following way:
> >
> > 1. Only support P8A8 format in the driver
> >
> > 2. ran the above command and I saw white OSD text
> >
> > 3. Only support P4A4 format in the driver and don't use
> > 3DSTATE_SAMPLER_PALETTE_LOAD0 to load the value to the texture palette,
> > so the palette keeps unchanged.
> >
> > 4. ran the above command and I saw black OSD text.
> >
> > 5. Load the right value to the texture palette and ran the above command
> > again, I saw white OSD text.
> >
> > Hence I think sample_c with the paletted textures is used in the driver.
>
> That sounds like the palette is actually working, then.  Great :)
>
> I doubt that libva would use sample_c - sampling with a shadow comparison?
> It looks like it just uses sample and sample+killpix.

You are right, libva driver doesn't use sample_c message.

> I'm pretty sure the sample_c optimization just uses the palette memory as
> storage for some stuff, so it's quite possible it just works if you're
> only using sample and sample+killpix.

Thanks for the explanation, it makes sense to me.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
[danvet: Add wa name from Ville's review to the comment and copypaste
the explanation why we don't care about libva (already broken) from
Ken. Also add conclusion from libva devs that&why this is all fine.]
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Cc: "Xiang, Haihao" <haihao.xiang@intel.com>
Cc: libva@lists.freedesktop.org
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

During plane operations, we read/write some registers that only operate
properly if we're not runtime suspended.  At the moment we're not
holding the runtime PM reference across the whole plane operation, so
there's a potential for problems.

This issue was already partially addressed by commit

        commit d6dd6843
        Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
        Date:   Fri Aug 15 15:59:32 2014 -0300

            drm/i915: fix plane/cursor handling when runtime suspended

which took care of holding the runtime PM reference during the pin and
fence operations for plane updates.  However there are still a few
actual plane registers that we also need to hold the runtime PM
reference for.  Recent refactoring patches in preparation for atomic
have rearranged the code and made it increasingly likely that the
hardware will have time to suspend between the pin/fence operation and
the actual register writes. Examples of such registers are the stuff
touched by ivb_get_colorkey.

The solution here grabs the runtime PM reference around the 'commit'
operation for planes, which should cover all the relevant register
reads/writes.

Note that this has only been exposed with

commit 6beb8c23
Author: Matt Roper <matthew.d.roper@intel.com>
Date:   Mon Dec 1 15:40:14 2014 -0800

    drm/i915: Consolidate plane 'prepare' functions (v2)

so doesn't need to be ported to 3.19.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87180Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Testcase: igt/pm-rpm/legacy-planes
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Augment commit message with information Paulo supplied.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's be optimistic that for future platforms this will remain the same
and reorg a bit.
This reorg in if blocks instead of switch make life easier for future
platform support addition.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's be optimistic that for future platforms this will remain the same
and reorg a bit.
This reorg in if blocks instead of switch make life easier for future
platform support addition.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's be optimistic that for future platforms this will remain the same
and reorg a bit.
This reorg in if blocks instead of switch make life easier for future
platform support addition.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's be optimistic that for future platforms memory management doesn't change
that much and reuse gen8 function for PPGTT init.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Let's be optimistic that for future platforms this will remain the same
and reorg a bit.
This reorg in if blocks instead of switch make life easier for future
platform support addition.

v2: Jani pointed out I was missing reg_830 for some gen3 platforms. So let's make
    this platforms subcases of Gen checks.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Many distro's have mechanism in place to collect and automatically file
bugs for failed WARN()s.  And since i915 has a lot of hw state sanity
checks which result in WARN(), it generates quite a lot of noise which
is somewhat disconcerting to the end user.

Separate out the internal hw-is-in-the-state-I-expected checks into
I915_STATE_WARN()s and allow configuration via i915.verbose_checks module
param about whether this will generate a full blown stacktrace or just
DRM_ERROR().  The new moduleparam defaults to true, so by default there
is no change in behavior.  And even when disabled, you will still get
an error message logged.

v2: paint the macro names blue, clarify that the default behavior
    remains the same as before
Signed-off-by: NRob Clark <robdclark@gmail.com>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Otherwise, new platforms without workarounds will hit this warning for
every new context created.

Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In Gen8+, full ppgtt needs execlist, otherwise the ctx switch can hang.

Also remove the current restriction, a user should be able to explicitly set
ppgtt=2.

Note, this patch considers that execlist support has been enabled by
default on Gen8.

v2: Remove non-default restriction and clarify commit message (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
[danvet: s/comment/commit message/ in the commit message since that's
what Michel meant as per our irc discussion.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With cherryview onwards, Gunit hardware itself save and restore all the
Gunit registers. Skipping the "vlv_save_gunit_s0ix_state" &
"vlv_restore_gunit_s0ix_state" for cherryview in S3/S0ix sequence.
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Higher RC6 residency is observed using timeout mode
instead of EI mode. It's Recommended to use TO Method for RC6.

v2: Add comment about timeout threshold. (Tom)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will allow us to read the number of dispatched compute threads
for GL_ARB_pipeline_statistics_query.
Signed-off-by: NJordan Justen <jordan.l.justen@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Move it to a separate function since the main do_execbuffer function
already has so much going on.

v2:
- Move pin/unpin calls inside i915_parse_cmds() (Chris W, v4 7/7
  feedback)

Issue: VIZ-4719
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-By: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

By adding a new exec_entry flag, we cleanly mark the shadow objects
as purgeable after they are on the active list.

v2:
- Move 'shadow_batch_obj->madv = I915_MADV_WILLNEED' inside _get
  fnc (danvet, from v4 6/7 feedback)

v3:
- Remove duplicate 'madv = I915_MADV_WILLNEED' (danvet, from v6 4/5)

Issue: VIZ-4719
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-By: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Previously we couldn't trust the user-supplied batch length because
it came directly from userspace (i.e. untrusted code). It would have
affected what commands software parsed without regard to what hardware
would actually execute, leaving a potential hole.

With the parser now copying the user supplied batch buffer and writing
MI_NOP commands to any space after the copied region, we can safely use
the batch length input. This should be a performance win as the actual
batch length is frequently much smaller than the allocated object size.

v2: Fix handling of non-zero batch_start_offset

Issue: VIZ-4719
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-By: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch sets up all of the tracking and copying necessary to
use batch pools with the command parser and dispatches the copied
(shadow) batch to the hardware.

After this patch, the parser is in 'enabling' mode.

Note that performance takes a hit from the copy in some cases
and will likely need some work. At a rough pass, the memcpy
appears to be the bottleneck. Without having done a deeper
analysis, two ideas that come to mind are:
1) Copy sections of the batch at a time, as they are reached
   by parsing. Might improve cache locality.
2) Copy only up to the userspace-supplied batch length and
   memset the rest of the buffer. Reduces the number of reads.

v2:
- Remove setting the capacity of the pool
- One global pool instead of per-ring pools
- Replace batch_obj with shadow_batch_obj and hook into eb->vmas
- Memset any space in the shadow batch beyond what gets copied
- Rebased on execlist prep refactoring

v3:
- Rebase on chained batch handling
- Squash in setting the secure dispatch flag
- Add a note about the interaction w/secure dispatch pinning
- Check for request->batch_obj == NULL in i915_gem_free_request

v4:
- Fix read domains for shadow_batch_obj
- Remove the set_to_gtt_domain call from i915_parse_cmds
- ggtt_pin/unpin in the parser block to simplify error handling
- Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag
- Remove i915_gem_batch_pool_put calls

v5:
- Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after
  the parser (danvet, from v4 0/7 feedback)

Issue: VIZ-4719
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-By: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds a small module for managing a pool of batch buffers.
The only current use case is for the command parser, as described
in the kerneldoc in the patch. The code is simple, but separating
it out makes it easier to change the underlying algorithms and to
extend to future use cases should they arise.

The interface is simple: init to create an empty pool, fini to
clean it up, get to obtain a new buffer. Note that all buffers are
expected to be inactive before cleaning up the pool.

Locking is currently based on the caller holding the struct_mutex.
We already do that in the places where we will use the batch pool
for the command parser.

v2:
- s/BUG_ON/WARN_ON/ for locking assertions
- Remove the cap on pool size
- Switch from alloc/free to init/fini

v3:
- Idiomatic looping structure in _fini
- Correct handling of purged objects
- Don't return a buffer that's too much larger than needed

v4:
- Rebased to latest -nightly

v5:
- Remove _put() function and clean up comments to match

v6:
- Move purged check inside the loop (danvet, from v4 1/7 feedback)

v7:
- Use single list instead of two. (Chris W)
- s/active_list/cache_list
- Squashed in debug patches (Chris W)
  drm/i915: Add a batch pool debugfs file

  It provides some useful information about the buffers in
  the global command parser batch pool.

  v2: rebase on global pool instead of per-ring pools
  v3: rebase

  drm/i915: Add batch pool details to i915_gem_objects debugfs

  To better account for the potentially large memory consumption
  of the batch pool.

v8:
- Keep cache in LRU order (danvet, from v6 1/5 feedback)

Issue: VIZ-4719
Signed-off-by: NBrad Volkin <bradley.d.volkin@intel.com>
Reviewed-By: NJon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

After

commit a18c0af1
uthor: Thierry Reding <treding@nvidia.com>
Date:   Wed Dec 10 11:38:49 2014 +0100

    drm: Zero out DRM object memory upon cleanup

we will use the eDP encoder during destroying it. Fix this by calling
drm_encoder_cleanup() at a point when the encoder is not used any more.
This caused a NULL pointer dereference in pps_lock(), I can't see that
it caused any other problem.

All the other encoders seem to call drm_encoder_cleanup() at a safe
place.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

I've checked that TRANS_DDI_MODE, DP_TP_CTL MST bits are identical to
HSW/BDW on SKL, as well as the long vs short HPD bits. So we have a good
chance to be working as well as prevous platforms.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

2 pieces of code need to read out the DDI clock: the DDI encoder and the
MST encoder .get_config() vfuncs.

Until now the SKL read out code was only in the former, so let's move
the pre and post SKL logic in intel_ddi_clock_get() and this this one
everywhere.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

LFP brighness control from the VBT block 43 indicates which
controller is used for brightness.
LFP1 brightness control method:
Bit 7-4 = This field controller number of the brightnes controller.
0 = Controller 0
1 = Controller 1
2 = Controller 2
3 = Controller 3
Others = Reserved
Bits 3-0 = This field specifies the brightness control pin to be used on the
platform.
0 = PMIC pin is used for brightness control
1 = LPSS PWM is used for brightness control
2 = Display DDI is used for brightness control
3 = CABC method to control brightness
Others = Reserved

Adding the above fields in dev_priv->vbt and corresponding changes in
parse_backlight()

v2: Jani's review comments addressed
	- Move PWM definitions to intel_bios.h
	- Moving vbt_version to intel_vbt_data
	- Rename brightness to bl_ctrl_data
	- Logging just control_pin instead of string
	- Avoid adding vbt_version in dev_priv
	- Since only DDI option is available as of now, let control pin DDI
	affect dev_priv->vbt.backlight.present

v3: Jani's review comments addressed
	- Drop control_pin
	- Use bdb->version
	- set controller to 0 instead of using control pin define
	- check controller bounds
	- remove superfluous changes in intel_parse_bios
Signed-off-by: NDeepak M <m.deepak@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We were incorreectly bypassing the flush everytime which led to fifo
underrun when more than one plane is enabled.
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Satheeshakrishna M<satheeshakrishna.m@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Execlist support in the i915 driver is now considered good enough for the
feature to be enabled by default on Gen8 and later and routinely tested.
Adjusted i915 parameters structure initialization to reflect this and updated
the comment in intel_sanitize_enable_execlists().

There's still work to do before we can let the wider massive onto it,
but there's still time left before the 3.20 cutoff.

v2: Update the MODULE_PARM_DESC too.

Issue: VIZ-2020
Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
[danvet: Add note that there's still some work left to do.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The pipe wm parameters is not correctly updated with sprite parameters
because it copies them for each plane from plane_list to the sprite
offset in pipe wm parameters. Since plane_list also contains primary and
cursor planes, we end up updating wrong params for sprites.
Signed-off-by: NSonika Jindal <sonika.jindal@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A short section describing background, implementation and intended usage.

v2:
    * Align section name between template and DOC comment. (Michel Thierry)

For: VIZ-4544
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Things like reliable GGTT mappings and mirrored 2d-on-3d display will need
to map objects into the same address space multiple times.

Added a GGTT view concept and linked it with the VMA to distinguish between
multiple instances per address space.

New objects and GEM functions which do not take this new view as a parameter
assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the
previous behaviour.

This now means that objects can have multiple VMA entries so the code which
assumed there will only be one also had to be modified.

Alternative GGTT views are supposed to borrow DMA addresses from obj->pages
which is DMA mapped on first VMA instantiation and unmapped on the last one
going away.

v2:
    * Removed per view special casing in i915_gem_ggtt_prepare /
      finish_object in favour of creating and destroying DMA mappings
      on first VMA instantiation and last VMA destruction. (Daniel Vetter)
    * Simplified i915_vma_unbind which does not need to count the GGTT views.
      (Daniel Vetter)
    * Also moved obj->map_and_fenceable reset under the same check.
    * Checkpatch cleanups.

v3:
    * Only retire objects once the last VMA is unbound.

v4:
    * Keep scatter-gather table for alternative views persistent for the
      lifetime of the VMA.
    * Propagate binding errors to callers and handle appropriately.

v5:
    * Explicitly look for normal GGTT view in i915_gem_obj_bound to align
      usage in i915_gem_object_ggtt_unpin. (Michel Thierry)
    * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry)
    * Removed stray semi-colon in i915_gem_object_set_cache_level.

For: VIZ-4544
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
[danvet: Drop hunk from i915_gem_shrink since it's just prettification
but upsets a __must_check warning.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

According to updated BSpec, Render/Common/media Wells register range changed.
Updating the same to match the spec and avoid extra forcewake for none
forcewake range.

v2: Update media forcewake range (Ville)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

From now on for both DSI Ports A & C, the seq_port value has been
set to 0. seq_port value is parsed from Sequence block#53 of VBT.
So, for packets that needs to be read/write for DSI single link on
Port A and Port C will now be based on the DVO port from VBT block 2,
instead of seq_port.
Signed-off-by: NGaurav K Singh <gaurav.k.singh@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Faster feedback to errors is always better. This is inspired by the
addition to WARN_ONs to mask/enable helpers for registers to make sure
callers have the arguments ordered correctly: Pretty much always the
arguments are static.

We use WARN_ON(1) a lot in default switch statements though where we
should always handle all cases. So add a new macro specifically for
that.

The idea to use __builtin_constant_p is from Chris Wilson.

v2: Use the ({}) gcc-ism to avoid the static inline, suggested by
Dave. My first attempt used __cond as the temp var, which is the same
used by BUILD_BUG_ON, but with inverted sense. Hilarity ensued, so
sprinkle i915 into the name.

Also use a temporary variable to only evaluate the condition once,
suggested by Damien.

v3: It's crazy but apparently 32bit gcc can't compile out the
BUILD_BUG_ON in a lot of cases and just falls over. I have no idea
why, but until clue grows just disable this nifty idea on 32bit
builds. Reported by 0-day builder.

v4: Got it all wrong, apparently its the gcc version. We need 4.9+.
Now reported by Imre.

v5: Chris suggested to add the case to MISSING_CASE for speedier
debug.

v6: Even some gcc 4.9 versions don't see through the maze, so give up
for now. Keep the skeleton and MISSING_CASE stuff though.

Cc: Imre Deak <imre.deak@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

We consistently use the _irq_handler postfix for functions called in
hardirq context. Especially when it's a non-static function hardirq is
a crazy enough calling context to warrant this level of ocd. So rename
it.

Cc: Thomas Daniel <thomas.daniel@intel.com>
Reviewed-by: NThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

We already implement this workaround, but it was missing its name.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>