- 14 2月, 2008 40 次提交
-
-
由 Paul Mundt 提交于
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
sh64 doesn't provide __uncached_start, so don't reference it unconditionally. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The SH-5 build currently fails when trying to build the i8042 code due to the missing IRQ definitions. These are provided in asm/cpu/irq.h, so just include that there to get it building again. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
asm/hardware.h doesn't exist any more, and the definitions sh-sci.h depended on are provided through asm/cpu/addrspace.h these days. Kill off the bogus include. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
A number of cleanups to get the SH-5 cache management code in line with the rest of the SH backend. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
maple_devinfo->connector_direction had a typo, fix it up.. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
linux/swap.h really wants to include linux/pagemap.h in order to satisfy the page_cache_release()/release_pages() definition requirements when CONFIG_SWAP=n. Unfortunately the code in question contains: /* only sparc can not include linux/pagemap.h in this file * so leave page_cache_release and release_pages undeclared... */ #define free_page_and_swap_cache(page) \ page_cache_release(page) #define free_pages_and_swap_cache(pages, nr) \ release_pages((pages), (nr), 0); so it looks like we're stuck with doing it in asm/tlb.h instead, as others already do (ARM, CRIS, etc.). Grumble. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kristoffer Ericson 提交于
This patch removes defunct. led support functions from hp6xx.h since they are now added in a proper driver (see commit below). Also adds tabs instead of spaces before comments. *commit d39a7a63Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian McMenamin 提交于
Improve device detection for maple through longer delay Experience suggests that a much longer delay in setting up the Maple bus on the Dreamcast leads to better hardware detection. Signed-off-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Previously this took an explicit range, update this to use the same behaviour as the rest of the SH parts where we simply flush out a line from the start address. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This needs a PAGE_KERNEL_NOCACHE definition, as provided by pgtable_32.h. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Applies the fix from 5b67954e to pgtable_64.h. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
All SH-5 machines are little endian. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds sh7366 cpu supports. Just the most basic things like interrupt controller, clocks and serial port are included at this point. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch removes the maskreg irq code since it is not in use anymore. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch makes the 32-bit ptrace code compile again. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch converts the highlander CF device from good old machvec readb/writeb to the new shiny trapped io. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch converts the CF device on r2d boards from machvec readb/writeb to trapped io. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
The idea is that we want to get rid of the in/out/readb/writeb callbacks from the machvec and replace that with simple inline read and write operations to memory. Fast and simple for most hardware devices (think pci). Some devices require special treatment though - like 16-bit only CF devices - so we need to have some method to hook in callbacks. This patch makes it possible to add a per-device trap generating filter. This way we can get maximum performance of sane hardware - which doesn't need this filter - and crappy hardware works but gets punished by a performance hit. V2 changes things around a bit and replaces io access callbacks with a simple minimum_bus_width value. In the future we can add stride as well. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Update the defconfigs for r2d-plus and r2d-1 since we now have new drivers for sm501 usb, spi-over-sci and epson r9701 rtc in mainline. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch converts the unaligned access handling code to use opcode_t instead of u16. While at it, enable unaligned access handling for sh2a. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds byte support to the sign extension code. Unaligned access traps should never be generated on 8-bit io operations, but we will use this code for trapped io and we do need byte support there. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch changes copy_from_user() and copy_to_user() from macros into static inline functions. This way we can use them as function pointers. Also unify the 64 bit and 32 bit versions. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Peter Zijlstra 提交于
move update_process_times() out from under xtime_lock. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds basic support for the Migo-R board. Only simple stuff provided by the cpu specific sh7722 code is in place now, like serial console port, timers and usb gadget. There is also partial support for the smc91c111 ethernet controller - unfortunately some driver header file also needs patching (not included here) to make the driver get IRQ sense information from the platform data. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian McMenamin 提交于
This patch removes the now unneeded registration check variable from struct maple_device. (This patch assumes the include/linux/maple.h file has already been patched for whitespace errors by http://lkml.org/lkml/2008/2/6/327) Signed-off-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian McMenamin 提交于
Replacement second-in-series patch: This patch fixes up memory leaks and, by delaying initialisation, makes device detection more robust. It also makes clearer the difference between struct maple_device and struct device, as well as cleaning up the interrupt request code (without changing its function in any way). Also now removes redundant registration checking. Signed-off-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Adrian McMenamin 提交于
This patch is fundamentally about fixing up the whitespace problems introduced by my previous patch (that brought the code into mainline). A second patch will follow that will fix memory leaks. The two need to be applied sequentially. Signed-off-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Break out the sign extension code since it's used in multiple places. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds support for sh7722 devices with prr value 0xa1. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
This patch adds the base address of SCIF0 in the case of sh7722. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Alan Cox 提交于
These ports are holding up progress and now have been for months. Do the job for them. Signed-off-by: NAlan Cox <alan@redhat.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-