- 07 1月, 2009 13 次提交
-
-
由 Graf Yang 提交于
Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Bernd Schmidt 提交于
Fix a few problems I discovered when building a kernel with upstream CVS binutils. We have to add the NOTES macro to our linker script, since a kernel built with --build-id is otherwise unable to boot. Last time NOTES was added, it broke things, but the definition of the macro has changed not to rely on parts of the linker script that aren't present on Blackfin. I also noticed that _l2_lma_start does not point into the kernel image, but rather somewhere in L1/L2 space, which seems unintended. Also, when the L2 section was added to the linker script, the part following it which computes then length of the init section was not updated. Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Graf Yang 提交于
Add document about bfin-gpio when requesting a pin both as gpio and gpio interrupt. Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Bernd Schmidt 提交于
Remove all traces of the relocation stack. It's been removed from binutils for years now. Add a sanity overflow check to pcrel24 relocations to catch modules that were built without -mlong-calls. Signed-off-by: NBernd Schmidt <bernds_cb1@t-online.de> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Tweak the BUG_ON() check to allow for equal values since the way pos is handled ... it is always indexed and post incremented Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
use scm changelog rather than comment blocks in files Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Michael Hennerich 提交于
- remove duplicated code and headers - add option allowing arbitrary SDRAM/DDR Timing parameters. - mark automatically calculated timings as EXPERIMENTAL - fix comment header block Related to BUGs: - kernel boot up fails with CONFIG_BFIN_KERNEL_CLOCK item on. - kernel does not boot if re-program clocks [ Mike Frysinger <vapier.adi@gmail.com> - fix comment header - mark do_sync static - document the DMA shutdown - simplify SIC_IWR handling - fix ANOMALY_05000265 handling to work as intended ] Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Graf Yang 提交于
[Mike Frysinger <vapier.adi@gmail.com>: - use KERN_NOTICE when using gpios as both irq and non rather than KERN_ERR - embedded newlines in printk() does not fly] Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
- 18 11月, 2008 27 次提交
-
-
由 Michael Hennerich 提交于
CCLK is variable: get current CCLK in show_cpuinfo Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Graf Yang 提交于
Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Graf Yang 提交于
Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
add ANOMALY_05000435 to handle SIC_IWR1 workaround for rebooting Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Only define HI/LO macros for assembly files since some common C files use HI/LO as variable names Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
- unify duplicate page_size_table definitions - make sure it is placed alongside the other cplb switching code Pointed-out-by: NMichael McTernan <mmcternan@airvana.com> Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
change return of close_cplbtab() and fill_cplbtab() to void since we always return 0 and nowhere do we check this Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Merge MPU and noMPU version of CPLB info code to one common version. Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
define BASE_BAUD like everyone else, althought it is only used by 8250 Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Do not make BFIN_DMA_5XX optional since a large portion of our code relies on dma functions existing Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Michael Hennerich 提交于
to reproduce: $ make BF537-STAMP_defconfig $ make menuconfig CPU Frequency scaling ---> [*] CPU Frequency scaling <M> CPU frequency translation statistics $ make arch/blackfin/mach-common/built-in.o: In function `bfin_target': arch/blackfin/mach-common/cpufreq.c:(.text+0xf1e): undefined reference to `cpufreq_frequency_table_target' arch/blackfin/mach-common/built-in.o: In function `bfin_verify_speed': arch/blackfin/mach-common/cpufreq.c:(.text+0x1056): undefined reference to `cpufreq_frequency_table_verify' arch/blackfin/mach-common/built-in.o: In function `__bfin_cpu_init': arch/blackfin/mach-common/cpufreq.c:(.init.text+0x554): undefined reference to `cpufreq_frequency_table_get_attr' arch/blackfin/mach-common/cpufreq.c:(.init.text+0x56a): undefined reference to `cpufreq_frequency_table_cpuinfo' arch/blackfin/mach-common/built-in.o: In function `sys_call_table': (.data+0x83c): undefined reference to `cpufreq_freq_attr_scaling_available_freqs' make: *** [.tmp_vmlinux1] Error 1 Blackfin wants CPU_FREQ_TABLE Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
rename cache_lock() to bfin_cache_lock() to avoid namespace collision with common code Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
- make the code a bit more readable - kill of warnings/ifdef mess a bit Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
arch/blackfin/mach-common/entry.S:465: Error: pcrel too far BFD_RELOC_BFIN_10 Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
rename irq_flags to bfin_irq_flags to avoid namespace collision with common code Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
move irq related functions into asm/irq.h and out of the mondo asm/system.h Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Move the PORT registers down as well since they may utilize asm/system.h code Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
create an IN_MEM() macro to simplify comparing an address in an on-chip region of memory and make things readable Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-