Implement the non-standard pwm_use_point2_pwm_at_crit sysfs attribute
as the adt7473 driver did.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>

New documentation for the adt7475 driver, based on the adt7473 driver
documentation. It is IMHO much more useful that the previous
documentation which was essentially redundant with sysfs-interface.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>

Add support for the ADT7473 to the adt7475 driver, and mark the
adt7473 driver for removal. The ADT7473 and ADT7475 chips are almost
the same chip and essentially compatible, so there's no point in
having separate drivers for them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>

This adds support for the Fintek f71889fg to the f71882fg driver,
many thanks to Gerd v. Egidy for providing (remote) access to a
machine which such an ic.

Note that this bit of the patch:
-	val = SENSORS_LIMIT(val, 0, 255);
+
+	if (data->type == f71889fg)
+		val = SENSORS_LIMIT(val, -128, 127);
+	else
+		val = SENSORS_LIMIT(val, 0, 127);

Changes behaviour for already supported models, the new behaviour is correct
as the already supported models have bit 7 of the involved registers fixed at
0, so the previous behaviour which allowed setting temp zone limits > 127
was not correct.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

There is a bug in the old sysfs file removal, as it uses fxxxx_in_temp_attr
to remove the in and temp sysfs attributes, but fxxxx_in_temp_attr has
temp#_alarm, where as f71858fg_in_temp_attr has temp#_max_alarm, so
the temp#_max_alarm attributes for the f71858fg never get removed.

This patch fixes this by doing the sysfs removal exactly the same way as
the creation instead of being (too) clever, this will also avoid similar
bugs in the future.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch merges the f71882fg_auto_pwm_attr array into the
fxxxx_fan_attr resp. fxxxx_auto_pwm_attr array, as the f71882fg_auto_pwm_attr
array was merely extending these 2 with entries for a 4th fan, it also makes
these 2 arrays 2 dimensional so that the rest of the code can choose to
add attr for 3 or 4 fans without needing to know the nr of attr per fan.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

This patch makes a number of cleanups to the sysfs attr creation
in the f71882fg driver, this is a preparation patch for adding f71889fg
support:

* Add some comments to explain why some models need separate sysfs attr
  arrays for in / temp / fan / pwm
* Rename a number of sysfs attr arrays to make their function clearer
* Move the pwm#_auto_channels_temp attribute from the common to all
  models fan attr array to the per model auto mode pwm attr arrays, so
  that all the auto mode pwm attr are grouped together, and thus can be
  left out on models where we don't support auto pwm mode
* Put fan_beep attr in their own array, so that only auto mode pwm attr
  remain in the per model pwm sysfs attr arrays.
* Put the 4th special fan input for the f8000 in its own array, so that only
  auto mode pwm attr remain in the per model pwm sysfs attr arrays.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The thmc50 driver is the last user of I2C_CLIENT_MODULE_PARM, and I
would like to get rid of that macro.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NKrzysztof Helt <krzysztof.h1@wp.pl>

This driver provides support for the ADC integrated into the
Freescale MC13783 PMIC.
Signed-off-by: NLuotao Fu <l.fu@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NHans de Goede <hdegoede@redhat.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The w83791d driver has been in the kernel for a while now,
time to remove the EXPERIMENTAL dependency.
Signed-off-by: NMarc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NCorentin Labbe <corentin.labbe@geomatys.fr>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Juerg Haefliger <juergh@gmail.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Acked-by: N"Hans J. Koch" <hjk@linutronix.de>
Cc: Rudolf Marek <r.marek@assembler.cz>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NMarc Hulsman <m.hulsman@tudelft.nl>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NAndre Prendel <andre.prendel@gmx.de>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

As kind is now hard-coded to -1, there is room for code clean-ups.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The National Semiconductor LM73 is a single temperature sensor, much
like the famous LM75.
Signed-off-by: NAdrien Demarez <adrien.demarez@bolloretelecom.eu>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Stop using global variables REG and VAL for I/O port numbers. This is
ugly and unsafe.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>

This module parameter is there to workaround broken BIOS. I'm not even
sure if it was used in the past 5 years, and it gets in the way of
converting the driver to the MFD infrastructure. So tell the users how
they can do the same from user-space.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>

The fan2 and fan3 input and output pins can be used as GPIOs. Check
their function before exposing their sysfs attributes and accessing
their registers.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The VID input pins can alternatively be used as GPIOs. Make sure we
have at least 4 pins used for VID, otherwise don't bother reading and
exposing VID.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Tested-by: NAdam Nielsen <a.nielsen@shikadi.net>

Document the case of hybrid automatic fan speed control
implementations, where trip points are associated to both PWM output
channels and temperature input channels.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add missing documentation and header files to the hardware monitoring
subsystem section.
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The previous patch, commit be4c23c9 was
from the wrong tree and thus broke the current build which had the
channel configuration name changed.

Fix the following build errors:

drivers/hwmon/s3c-hwmon.c: In function 's3c_hwmon_probe':
drivers/hwmon/s3c-hwmon.c:326: warning: initialization from incompatible pointer type
drivers/hwmon/s3c-hwmon.c:331: error: dereferencing pointer to incomplete type
drivers/hwmon/s3c-hwmon.c:336: error: dereferencing pointer to incomplete type
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Merge branches 'timers-for-linus-ntp' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-ntp' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ntp: Provide compability defines (You say MOD_NANO, I say ADJ_NANO)

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: do not execute DEBUG_SHIRQ when irq setup failed

Merge branch 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Fix /proc/timer_list regression
  itimers: Fix racy writes to cpu_itimer fields
  timekeeping: Fix clock_gettime vsyscall time warp

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timers, init: Limit the number of per cpu calibration bootup messages
  posix-cpu-timers: optimize and document timer_create callback
  clockevents: Add missing include to pacify sparse
  x86: vmiclock: Fix printk format
  x86: Fix printk format due to variable type change
  sparc: fix printk for change of variable type
  clocksource/events: Fix fallout of generic code changes
  nohz: Allow 32-bit machines to sleep for more than 2.15 seconds
  nohz: Track last do_timer() cpu
  nohz: Prevent clocksource wrapping during idle
  nohz: Type cast printk argument
  mips: Use generic mult/shift factor calculation for clocks
  clocksource: Provide a generic mult/shift factor calculation
  clockevents: Use u32 for mult and shift factors
  nohz: Introduce arch_needs_cpu
  nohz: Reuse ktime in sub-functions of tick_check_idle.
  time: Remove xtime_cache
  time: Implement logarithmic time accumulation

Merge branch 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hpet: Make WARN_ON understandable
  x86: arch specific support for remapping HPET MSIs
  intr-remap: generic support for remapping HPET MSIs
  x86, hpet: Simplify the HPET code
  x86, hpet: Disable per-cpu hpet timer if ARAT is supported

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: core - Prevent too-small buffer sizes
  hwrng: virtio-rng - Convert to new API
  hwrng: core - Replace u32 in driver API with byte array
  crypto: ansi_cprng - Move FIPS functions under CONFIG_CRYPTO_FIPS
  crypto: testmgr - Add ghash algorithm test before provide to users
  crypto: ghash-clmulni-intel - Put proper .data section in place
  crypto: ghash-clmulni-intel - Use gas macro for PCLMULQDQ-NI and PSHUFB
  crypto: aesni-intel - Use gas macro for AES-NI instructions
  x86: Generate .byte code for some new instructions via gas macro
  crypto: ghash-intel - Fix irq_fpu_usable usage
  crypto: ghash-intel - Add PSHUFB macros
  crypto: ghash-intel - Hard-code pshufb
  crypto: ghash-intel - Fix building failure on x86_32
  crypto: testmgr - Fix warning
  crypto: ansi_cprng - Fix test in get_prng_bytes
  crypto: hash - Remove cra_u.{digest,hash}
  crypto: api - Remove digest case from procfs show handler
  crypto: hash - Remove legacy hash/digest code
  crypto: ansi_cprng - Add FIPS wrapper
  crypto: ghash - Add PCLMULQDQ accelerated implementation

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] iTCO_wdt.c - cleanup chipset documentation
  [WATCHDOG] iTCO_wdt: Add support for Intel Ibex Peak
  [WATCHDOG] CPUFREQ: S3C24XX Watchdog frequency scaling support.

* 'x86-xen-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpumask: Use modern cpumask style in Xen

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: UV RTC: Always enable RTC clocksource
  x86: UV RTC: Rename generic_interrupt to x86_platform_ipi
  x86: UV RTC: Clean up error handling
  x86: UV RTC: Add clocksource only boot option
  x86: UV RTC: Fix early expiry handling

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: don't restart timer if disabled
  x86: Use -maccumulate-outgoing-args for sane mcount prologues
  x86: Prevent GCC 4.4.x (pentium-mmx et al) function prologue wreckage
  x86: AMD Northbridge: Verify NB's node is online
  x86 VSDO: Fix Kconfig help
  x86: Fix typo in Intel CPU cache size descriptor
  x86: Add new Intel CPU cache size descriptors

Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  vgacon: Add support for setting the default cursor state
  vc: Add support for hiding the cursor when creating VTs
  x86, setup: Store the boot cursor state