Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 03 3月, 2009 2 次提交
  3. 02 3月, 2009 1 次提交
    • S
      tracing: add TRACE_FIELD_SPECIAL to record complex entries · d20e3b03
      由 Steven Rostedt 提交于 
      Tom Zanussi pointed out that the simple TRACE_FIELD was not enough to
record trace data that required memcpy. This patch addresses this issue
by adding a TRACE_FIELD_SPECIAL. The format is similar to TRACE_FIELD
but looks like so:

  TRACE_FIELD_SPECIAL(type_item, item, cmd)

What TRACE_FIELD gave was:

  TRACE_FIELD(type, item, assign)

The TRACE_FIELD would be used in declaring a structure:

  struct {
	type	item;
  };

And later assign it via:

  entry->item = assign;

What TRACE_FIELD_SPECIAL gives us is:

In the declaration of the structure:

  struct {
	type_item;
  };

And the assignment:

  cmd;

This change log will explain the one example used in the patch:

 TRACE_EVENT_FORMAT(sched_switch,
	TPPROTO(struct rq *rq, struct task_struct *prev,
		struct task_struct *next),
	TPARGS(rq, prev, next),
	TPFMT("task %s:%d ==> %s:%d",
	      prev->comm, prev->pid, next->comm, next->pid),
	TRACE_STRUCT(
		TRACE_FIELD(pid_t, prev_pid, prev->pid)
		TRACE_FIELD(int, prev_prio, prev->prio)
		TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN],
				    next_comm,
				    TPCMD(memcpy(TRACE_ENTRY->next_comm,
						 next->comm,
						 TASK_COMM_LEN)))
		TRACE_FIELD(pid_t, next_pid, next->pid)
		TRACE_FIELD(int, next_prio, next->prio)
	),
	TPRAWFMT("prev %d:%d ==> next %s:%d:%d")
	);

 The struct will be create as:

  struct {
	pid_t		prev_pid;
	int		prev_prio;
	char next_comm[TASK_COMM_LEN];
	pid_t		next_pid;
	int		next_prio;
  };

Note the TRACE_ENTRY in the cmd part of TRACE_SPECIAL. TRACE_ENTRY will
be set by the tracer to point to the structure inside the trace buffer.

  entry->prev_pid	= prev->pid;
  entry->prev_prio	= prev->prio;
  memcpy(entry->next_comm, next->comm, TASK_COMM_LEN);
  entry->next_pid	= next->pid;
  entry->next_prio	= next->prio
Reported-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      d20e3b03
  5. 28 2月, 2009 10 次提交
    • S
      tracing: create the C style tracing for the irq subsystem · f2034f1e
      由 Steven Rostedt 提交于 
      This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the irq subsystem trace points.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      f2034f1e
    • S
      tracing: create the C style tracing for the sched subsystem · 62992804
      由 Steven Rostedt 提交于 
      This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the sched subsystem trace points.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      62992804
    • S
      tracing: add raw fast tracing interface for trace events · fd994989
      由 Steven Rostedt 提交于 
      This patch adds the interface to enable the C style trace points.
In the directory /debugfs/tracing/events/subsystem/event
We now have three files:

 enable : values 0 or 1 to enable or disable the trace event.

 available_types: values 'raw' and 'printf' which indicate the tracing
       types available for the trace point. If a developer does not
       use the TRACE_EVENT_FORMAT macro and just uses the TRACE_FORMAT
       macro, then only 'printf' will be available. This file is
       read only.

 type: values 'raw' or 'printf'. This indicates which type of tracing
       is active for that trace point. 'printf' is the default and
       if 'raw' is not available, this file is read only.

 # echo raw > /debug/tracing/events/sched/sched_wakeup/type
 # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable

 Will enable the C style tracing for the sched_wakeup trace point.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      fd994989
    • S
      tracing: add raw trace point recording infrastructure · c32e827b
      由 Steven Rostedt 提交于 
      Impact: lower overhead tracing

The current event tracer can automatically pick up trace points
that are registered with the TRACE_FORMAT macro. But it required
a printf format string and parsing. Although, this adds the ability
to get guaranteed information like task names and such, it took
a hit in overhead processing. This processing can add about 500-1000
nanoseconds overhead, but in some cases that too is considered
too much and we want to shave off as much from this overhead as
possible.

Tom Zanussi recently posted tracing patches to lkml that are based
on a nice idea about capturing the data via C structs using
STRUCT_ENTER, STRUCT_EXIT type of macros.

I liked that method very much, but did not like the implementation
that required a developer to add data/code in several disjoint
locations.

This patch extends the event_tracer macros to do a similar "raw C"
approach that Tom Zanussi did. But instead of having the developers
needing to tweak a bunch of code all over the place, they can do it
all in one macro - preferably placed near the code that it is
tracing. That makes it much more likely that tracepoints will be
maintained on an ongoing basis by the code they modify.

The new macro TRACE_EVENT_FORMAT is created for this approach. (Note,
a developer may still utilize the more low level DECLARE_TRACE macros
if they don't care about getting their traces automatically in the event
tracer.)

They can also use the existing TRACE_FORMAT if they don't need to code
the tracepoint in C, but just want to use the convenience of printf.

So if the developer wants to "hardwire" a tracepoint in the fastest
possible way, and wants to acquire their data via a user space utility
in a raw binary format, or wants to see it in the trace output but not
sacrifice any performance, then they can implement the faster but
more complex TRACE_EVENT_FORMAT macro.

Here's what usage looks like:

  TRACE_EVENT_FORMAT(name,
	TPPROTO(proto),
	TPARGS(args),
	TPFMT(fmt, fmt_args),
	TRACE_STUCT(
		TRACE_FIELD(type1, item1, assign1)
		TRACE_FIELD(type2, item2, assign2)
			[...]
	),
	TPRAWFMT(raw_fmt)
	);

Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT
uses.

 name: is the unique identifier of the trace point
 proto: The proto type that the trace point uses
 args: the args in the proto type
 fmt: printf format to use with the event printf tracer
 fmt_args: the printf argments to match fmt

 TRACE_STRUCT starts the ability to create a structure.
 Each item in the structure is defined with a TRACE_FIELD

  TRACE_FIELD(type, item, assign)

 type: the C type of item.
 item: the name of the item in the stucture
 assign: what to assign the item in the trace point callback

 raw_fmt is a way to pretty print the struct. It must match
  the order of the items are added in TRACE_STUCT

 An example of this would be:

 TRACE_EVENT_FORMAT(sched_wakeup,
	TPPROTO(struct rq *rq, struct task_struct *p, int success),
	TPARGS(rq, p, success),
	TPFMT("task %s:%d %s",
	      p->comm, p->pid, success?"succeeded":"failed"),
	TRACE_STRUCT(
		TRACE_FIELD(pid_t, pid, p->pid)
		TRACE_FIELD(int, success, success)
	),
	TPRAWFMT("task %d success=%d")
	);

 This creates us a unique struct of:

 struct {
	pid_t		pid;
	int		success;
 };

 And the way the call back would assign these values would be:

	entry->pid = p->pid;
	entry->success = success;

The nice part about this is that the creation of the assignent is done
via macro magic in the event tracer.  Once the TRACE_EVENT_FORMAT is
created, the developer will then have a faster method to record
into the ring buffer. They do not need to worry about the tracer itself.

The developer would only need to touch the files in include/trace/*.h

Again, I would like to give special thanks to Tom Zanussi for this
nice idea.

Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      c32e827b
    • S
      tracing: add interface to write into current tracer buffer · ef5580d0
      由 Steven Rostedt 提交于 
      Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.

But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      ef5580d0
    • S
      tracing: add subsystem sched for sched events · 3d7ba938
      由 Steven Rostedt 提交于 
      Add the TRACE_SYSTEM sched for the sched events.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      3d7ba938
    • S
      tracing: add subsystem irq for irq events · 0ec2ef15
      由 Steven Rostedt 提交于 
      Add the TRACE_SYSTEM irq for the irq events.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      0ec2ef15
    • S
      tracing: make the set_event and available_events subsystem aware · b628b3e6
      由 Steven Rostedt 提交于 
      This patch makes the event files, set_event and available_events
aware of the subsystem.

Now you can enable an entire subsystem with:

  echo 'irq:*' > set_event

Note: the '*' is not needed.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      b628b3e6
    • S
      tracing: add subsystem level to trace events · 6ecc2d1c
      由 Steven Rostedt 提交于 
      If a trace point header defines TRACE_SYSTEM, then it will add the
following trace points into that event system.

If include/trace/irq_event_types.h has:

 #define TRACE_SYSTEM irq

at the top and

 #undef TRACE_SYSTEM

at the bottom, then a directory "irq" will be created in the
/debug/tracing/events directory. Inside that directory will contain the
two trace points that are defined in include/trace/irq_event_types.h.

Only adding the above to irq and not to sched, we get:

 # ls /debug/tracing/events/
irq                     sched_process_exit  sched_signal_send  sched_wakeup_new
sched_kthread_stop      sched_process_fork  sched_switch
sched_kthread_stop_ret  sched_process_free  sched_wait_task
sched_migrate_task      sched_process_wait  sched_wakeup

 # ls /debug/tracing/events/irq
irq_handler_entry  irq_handler_exit

If we add #define TRACE_SYSTEM sched to the trace/sched_event_types.h
then the rest of the trace events will be put in a sched directory
within the events directory.

I've been playing with this idea of the subsystem for a while, but
recently Tom Zanussi posted some patches to lkml that included this
method. Tom's approach was clean and got me to finally put some effort
to clean up the event trace points.

Thanks to Tom Zanussi for demonstrating how nice the subsystem
method is.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      6ecc2d1c
    • S
      tracing: move trace point formats to files in include/trace directory · eb594e45
      由 Steven Rostedt 提交于 
      Impact: clean up

To further facilitate the ease of adding trace points for developers, this
patch creates include/trace/trace_events.h and
include/trace/trace_event_types.h.

The former file will hold the trace/<type>.h files and the latter will hold
the trace/<type>_event_types.h files.

To create new tracepoints and to have them automatically
appear in the event tracer, a developer makes the trace/<type>.h file
which includes <linux/tracepoint.h> and the trace/<type>_event_types.h file.

The trace/<type>_event_types.h file will hold the TRACE_FORMAT
macros.

Then add the trace/<type>.h file to trace/trace_events.h,
and add the trace/<type>_event_types.h to the trace_event_types.h file.

No need to modify files elsewhere.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      eb594e45
  7. 27 2月, 2009 12 次提交
  9. 26 2月, 2009 5 次提交
  11. 25 2月, 2009 10 次提交
    • F
      tracing/core: make the read callbacks reentrants · d7350c3f
      由 Frederic Weisbecker 提交于 
      Now that several per-cpu files can be read or spliced at the
same, we want the read/splice callbacks for tracing files to be
reentrants.

Until now, a single global mutex (trace_types_lock) serialized
the access to tracing_read_pipe(), tracing_splice_read_pipe(),
and the seq helpers.

Ie: it means that if a user tries to read trace_pipe0 and
trace_pipe1 at the same time, the access to the function
tracing_read_pipe() is contended and one reader must wait for
the other to finish its read call.

The trace_type_lock mutex is mostly here to serialize the access
to the global current tracer (current_trace), which can be
changed concurrently. Although the iter struct keeps a private
pointer to this tracer, its callbacks can be changed by another
function.

The method used here is to not keep anymore private reference to
the tracer inside the iterator but to make a copy of it inside
the iterator. Then it checks on subsequents read calls if the
tracer has changed. This is not costly because the current
tracer is not expected to be changed often, so we use a branch
prediction for that.

Moreover, we add a private mutex to the iterator (there is one
iterator per file descriptor) to serialize the accesses in case
of multiple consumers per file descriptor (which would be a
silly idea from the user). Note that this is not to protect the
ring buffer, since the ring buffer already serializes the
readers accesses. This is to prevent from traces weirdness in
case of concurrent consumers. But these mutexes can be dropped
anyway, that would not result in any crash. Just tell me what
you think about it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d7350c3f
    • F
      tracing/core: introduce per cpu tracing files · b04cc6b1
      由 Frederic Weisbecker 提交于 
      Impact: split up tracing output per cpu

Currently, on the tracing debugfs directory, three files are
available to the user to let him extracting the trace output:

- trace is an iterator through the ring-buffer. It's a reader
  but not a consumer It doesn't block when no more traces are
  available.

- trace pretty similar to the former, except that it adds more
  informations such as prempt count, irq flag, ...

- trace_pipe is a reader and a consumer, it will also block
  waiting for traces if necessary (heh, yes it's a pipe).

The traces coming from different cpus are curretly mixed up
inside these files. Sometimes it messes up the informations,
sometimes it's useful, depending on what does the tracer
capture.

The tracing_cpumask file is useful to filter the output and
select only the traces captured a custom defined set of cpus.
But still it is not enough powerful to extract at the same time
one trace buffer per cpu.

So this patch creates a new directory: /debug/tracing/per_cpu/.

Inside this directory, you will now find one trace_pipe file and
one trace file per cpu.

Which means if you have two cpus, you will have:

 trace0
 trace1
 trace_pipe0
 trace_pipe1

And of course, reading these files will have the same effect
than with the usual tracing files, except that you will only see
the traces from the given cpu.

The original all-in-one cpu trace file are still available on
their original place.

Until now, only one consumer was allowed on trace_pipe to avoid
racy consuming on the ring-buffer. Now the approach changed a
bit, you can have only one consumer per cpu.

Which means you are allowed to read concurrently trace_pipe0 and
trace_pipe1 But you can't have two readers on trace_pipe0 or
trace_pipe1.

Following the same logic, if there is one reader on the common
trace_pipe, you can not have at the same time another reader on
trace_pipe0 or in trace_pipe1. Because in trace_pipe is already
a consumer in all cpu buffers in essence.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b04cc6b1
    • I
      Merge branch 'tip/tracing/ftrace' of... · 2b1b858f
      由 Ingo Molnar 提交于 
      Merge branch 'tip/tracing/ftrace' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace
      2b1b858f
    • I
      tracing: remove /debug/tracing/latency_trace · 886b5b73
      由 Ingo Molnar 提交于 
      Impact: remove old debug/tracing API

/debug/tracing/latency_trace is an old legacy format we kept from
the old latency tracer. Remove the file for now. If there's any
useful bit missing then we'll propagate any useful output bits into
the /debug/tracing/trace output.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      886b5b73
    • I
      tracing/hw-branch-tracing: convert bts-tracer mutex to a spinlock · 2d542cf3
      由 Ingo Molnar 提交于 
      Impact: fix CPU hotplug lockup

bts_hotcpu_handler() is called with irqs disabled, so using mutex_lock()
is a no-no.

All the BTS codepaths here are atomic (they do not schedule), so using
a spinlock is the right solution.

Cc: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2d542cf3
    • S
      tracing: make event directory structure · 1473e441
      由 Steven Rostedt 提交于 
      This patch adds the directory /debug/tracing/events/ that will contain
all the registered trace points.

 # ls /debug/tracing/events/
sched_kthread_stop      sched_process_fork  sched_switch
sched_kthread_stop_ret  sched_process_free  sched_wait_task
sched_migrate_task      sched_process_wait  sched_wakeup
sched_process_exit      sched_signal_send   sched_wakeup_new

 # ls /debug/tracing/events/sched_switch/
enable

 # cat /debug/tracing/events/sched_switch/enable
1

 # cat /debug/tracing/set_event
sched_switch
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      1473e441
    • S
      tracing: add schedule events to event trace · f3fe8e4a
      由 Steven Rostedt 提交于 
      This patch changes the trace/sched.h to use the DECLARE_TRACE_FMT
such that they are automatically registered with the event tracer.

And it also adds the tracing sched headers to kernel/trace/events.c
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      f3fe8e4a
    • S
      tracing: add event trace infrastructure · b77e38aa
      由 Steven Rostedt 提交于 
      This patch creates the event tracing infrastructure of ftrace.
It will create the files:

 /debug/tracing/available_events
 /debug/tracing/set_event

The available_events will list the trace points that have been
registered with the event tracer.

set_events will allow the user to enable or disable an event hook.

example:

 # echo sched_wakeup > /debug/tracing/set_event

Will enable the sched_wakeup event (if it is registered).

 # echo "!sched_wakeup" >> /debug/tracing/set_event

Will disable the sched_wakeup event (and only that event).

 # echo > /debug/tracing/set_event

Will disable all events (notice the '>')

 # cat /debug/tracing/available_events > /debug/tracing/set_event

Will enable all registered event hooks.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      b77e38aa
    • S
      tracing: add DEFINE_TRACE_FMT to tracepoint.h · 7c37730c
      由 Steven Rostedt 提交于 
      This patch creates a DEFINE_TRACE_FMT to map to DECLARE_TRACE.
This allows for the developers to place format strings and
args in with their tracepoint declaration. A tracer may now
override the DEFINE_TRACE_FMT macro and use it to record
a default format.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
      7c37730c
    • L
      Merge branch 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc · 694593e3
      由 Linus Torvalds 提交于 
      * 'proc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc:
  proc: fix PG_locked reporting in /proc/kpageflags
      694593e3