- 25 4月, 2010 6 次提交
-
-
由 Jan Kiszka 提交于
Based on Gleb's suggestion: Add a helper kvm_is_linear_rip that matches a given linear RIP against the current one. Use this for guest single-stepping, more users will follow. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
So far user space was not able to save and restore debug registers for migration or after reset. Plug this hole. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
The interrupt shadow created by STI or MOV-SS-like operations is part of the VCPU state and must be preserved across migration. Transfer it in the spare padding field of kvm_vcpu_events.interrupt. As a side effect we now have to make vmx_set_interrupt_shadow robust against both shadow types being set. Give MOV SS a higher priority and skip STI in that case to avoid that VMX throws a fault on next entry. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Jan Kiszka 提交于
To avoid that user space migrates a pending software exception or interrupt, mask them out on KVM_GET_VCPU_EVENTS. Without this, user space would try to reinject them, and we would have to reconstruct the proper instruction length for VMX event injection. Now the pending event will be reinjected via executing the triggering instruction again. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
vcpu->run is initialized on vcpu creation and can never be NULL here. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
x86 arch defines desc_ptr for idt/gdt pointers, no need to define another structure in kvm code. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 21 4月, 2010 1 次提交
-
-
由 Jan Kiszka 提交于
A 16-bit TSS is only 44 bytes long. So make sure to test for the correct size on task switch. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 20 4月, 2010 4 次提交
-
-
由 Takuya Yoshikawa 提交于
Int is not long enough to store the size of a dirty bitmap. This patch fixes this problem with the introduction of a wrapper function to calculate the sizes of dirty bitmaps. Note: in mark_page_dirty(), we have to consider the fact that __set_bit() takes the offset as int, not long. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Andre Przywara 提交于
There is a quirk for AMD K8 CPUs in many Linux kernels (see arch/x86/kernel/cpu/mcheck/mce.c:__mcheck_cpu_apply_quirks()) that clears bit 10 in that MCE related MSR. KVM can only cope with all zeros or all ones, so it will inject a #GP into the guest, which will let it panic. So lets add a quirk to the quirk and ignore this single cleared bit. This fixes -cpu kvm64 on all machines and -cpu host on K8 machines with some guest Linux kernels. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
These are guest-triggerable. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
complete_pio() may use slot table which is protected by srcu. Signed-off-by: NGleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 01 3月, 2010 28 次提交
-
-
由 Jan Kiszka 提交于
This marks the guest single-step API improvement of 94fe45da and 91586a3b with a capability flag to allow reliable detection by user space. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Cc: stable@kernel.org (2.6.33) Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Add proper error and permission checking. This patch also change task switching code to load segment selectors before segment descriptors, like SDM requires, otherwise permission checking during segment descriptor loading will be incorrect. Cc: stable@kernel.org (2.6.33, 2.6.32) Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
This patch injects page fault when reading descriptor in load_guest_segment_descriptor() fails with FAULT. Effects of this injection: This function is used by kvm_load_segment_descriptor() which is necessary for the following instructions: - mov seg,r/m16 - jmp far - pop ?s This patch makes it possible to emulate the page faults generated by these instructions. But be sure that unless we change the kvm_load_segment_descriptor()'s ret value propagation this patch has no effect. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Thomas Gleixner 提交于
The i8254/i8259 locks need to be real spinlocks on preempt-rt. Convert them to raw_spinlock. No change for !RT kernels. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Make emulator check that vcpu is allowed to execute IN, INS, OUT, OUTS, CLI, STI. Signed-off-by: NGleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Currently when x86 emulator needs to access memory, page walk is done with broadest permission possible, so if emulated instruction was executed by userspace process it can still access kernel memory. Fix that by providing correct memory access to page walker during emulation. Signed-off-by: NGleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
For some instructions CPU behaves differently for real-mode and virtual 8086. Let emulator know which mode cpu is in, so it will not poke into vcpu state directly. Signed-off-by: NGleb Natapov <gleb@redhat.com> Cc: stable@kernel.org Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Wei Yongjun 提交于
If we fail to init ioapic device or the fail to setup the default irq routing, the device register by kvm_create_pic() and kvm_ioapic_init() remain unregister. This patch fixed to do this. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
kvm_emulate_pio() and complete_pio() both read out the RAX register value and copy it to a place into which the value read out from the port will be copied later. This patch removes this redundancy. /*** snippet from arch/x86/kvm/x86.c ***/ int complete_pio(struct kvm_vcpu *vcpu) { ... if (!io->string) { if (io->in) { val = kvm_register_read(vcpu, VCPU_REGS_RAX); memcpy(&val, vcpu->arch.pio_data, io->size); kvm_register_write(vcpu, VCPU_REGS_RAX, val); } ... Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Takuya Yoshikawa 提交于
This patch fixes kvm_fix_hypercall() to propagate X86EMUL_* info generated by emulator_write_emulated() to its callers: suggested by Marcelo. The effect of this is x86_emulate_insn() will begin to handle the page faults which occur in emulator_write_emulated(): this should be OK because emulator_write_emulated_onepage() always injects page fault when emulator_write_emulated() returns X86EMUL_PROPAGATE_FAULT. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Takuya Yoshikawa 提交于
This patch fixes load_guest_segment_descriptor() to return X86EMUL_PROPAGATE_FAULT when it tries to access the descriptor table beyond the limit of it: suggested by Marcelo. I have checked current callers of this helper function, - kvm_load_segment_descriptor() - kvm_task_switch() and confirmed that this patch will change nothing in the upper layers if we do not change the handling of this return value from load_guest_segment_descriptor(). Next step: Although fixing the kvm_task_switch() to handle the propagated faults properly seems difficult, and maybe not worth it because TSS is not used commonly these days, we can fix kvm_load_segment_descriptor(). By doing so, the injected #GP becomes possible to be handled by the guest. The only problem for this is how to differentiate this fault from the page faults generated by kvm_read_guest_virt(). We may have to split this function to achive this goal. Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zhai, Edwin 提交于
Enable optional parameter (default 0) - PCI segment (or domain) besides BDF, when assigning PCI device to guest. Signed-off-by: NZhai Edwin <edwin.zhai@intel.com> Acked-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
On HW task switch newly loaded segments should me marked as accessed. Reported-by: NLorenzo Martignoni <martignlo@gmail.com> Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
None of the other registers have the shadow_ prefix. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Assume that if the guest executes clts, it knows what it's doing, and load the guest fpu to prevent an #NM exception. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
Not used anymore. Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
This allows accessing the guest fpu from the instruction emulator, as well as being symmetric with kvm_put_guest_fpu(). Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Move to/from Control Registers chapter of Intel SDM says. "Reserved bits in CR0 remain clear after any load of those registers; attempts to set them have no impact". Control Register chapter says "Bits 63:32 of CR0 are reserved and must be written with zeros. Writing a nonzero value to any of the upper 32 bits results in a general-protection exception, #GP(0)." This patch tries to implement this twisted logic. Signed-off-by: NGleb Natapov <gleb@redhat.com> Reported-by: NLorenzo Martignoni <martignlo@gmail.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
Enhance mov dr instruction emulation used by SVM so that it properly handles dr4/5: alias to dr6/7 if cr4.de is cleared. Otherwise return EMULATE_FAIL which will let our only possible caller in that scenario, ud_interception, re-inject UD. We do not need to inject faults, SVM does this for us (exceptions take precedence over instruction interceptions). For the same reason, the value overflow checks can be removed. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Marcelo Tosatti 提交于
cleanup_srcu_struct on VM destruction remains broken: BUG: unable to handle kernel paging request at ffffffffffffffff IP: [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 RIP: 0010:[<ffffffff802533d2>] [<ffffffff802533d2>] srcu_read_lock+0x16/0x21 Call Trace: [<ffffffffa05354c4>] kvm_arch_vcpu_uninit+0x1b/0x48 [kvm] [<ffffffffa05339c6>] kvm_vcpu_uninit+0x9/0x15 [kvm] [<ffffffffa0569f7d>] vmx_free_vcpu+0x7f/0x8f [kvm_intel] [<ffffffffa05357b5>] kvm_arch_destroy_vm+0x78/0x111 [kvm] [<ffffffffa053315b>] kvm_put_kvm+0xd4/0xfe [kvm] Move it to kvm_arch_destroy_vm. Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Reported-by: NJan Kiszka <jan.kiszka@siemens.com>
-
由 Gleb Natapov 提交于
Fix compilation warnings and wrong mask value. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Windows issues this hypercall after guest was spinning on a spinlock for too many iterations. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up access to EOI/TPR/ICR apic registers for PV guests. Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Gleb Natapov 提交于
Minimum HYPER-V implementation should have GUEST_OS_ID, HYPERCALL and VP_INDEX MSRs. [avi: fix build on i386] Signed-off-by: NGleb Natapov <gleb@redhat.com> Signed-off-by: NVadim Rozenfeld <vrozenfe@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Follow the hardware. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Defer fpu deactivation as much as possible - if the guest fpu is loaded, keep it loaded until the next heavyweight exit (where we are forced to unload it). This reduces unnecessary exits. We also defer fpu activation on clts; while clts signals the intent to use the fpu, we can't be sure the guest will actually use it. Signed-off-by: NAvi Kivity <avi@redhat.com>
-