IMA requires having it's hash algorithm be compiled-in due to it's
early use.  The default IMA algorithm is protected by Kconfig to be
compiled-in.

The ima_hash kernel parameter allows to choose the hash algorithm. When
the specified algorithm is not available or available as a module, IMA
initialization fails, which leads to a kernel panic (mknodat syscall calls
ima_post_path_mknod()).  Therefore as fallback we force IMA to use
the default builtin Kconfig hash algorithm.

Fixed crash:

$ grep CONFIG_CRYPTO_MD4 .config
CONFIG_CRYPTO_MD4=m

[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.12.14-2.3-default root=UUID=74ae8202-9ca7-4e39-813b-22287ec52f7a video=1024x768-16 plymouth.ignore-serial-consoles console=ttyS0 console=tty resume=/dev/disk/by-path/pci-0000:00:07.0-part3 splash=silent showopts ima_hash=md4
...
[    1.545190] ima: Can not allocate md4 (reason: -2)
...
[    2.610120] BUG: unable to handle kernel NULL pointer dereference at           (null)
[    2.611903] IP: ima_match_policy+0x23/0x390
[    2.612967] PGD 0 P4D 0
[    2.613080] Oops: 0000 [#1] SMP
[    2.613080] Modules linked in: autofs4
[    2.613080] Supported: Yes
[    2.613080] CPU: 0 PID: 1 Comm: systemd Not tainted 4.12.14-2.3-default #1
[    2.613080] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
[    2.613080] task: ffff88003e2d0040 task.stack: ffffc90000190000
[    2.613080] RIP: 0010:ima_match_policy+0x23/0x390
[    2.613080] RSP: 0018:ffffc90000193e88 EFLAGS: 00010296
[    2.613080] RAX: 0000000000000000 RBX: 000000000000000c RCX: 0000000000000004
[    2.613080] RDX: 0000000000000010 RSI: 0000000000000001 RDI: ffff880037071728
[    2.613080] RBP: 0000000000008000 R08: 0000000000000000 R09: 0000000000000000
[    2.613080] R10: 0000000000000008 R11: 61c8864680b583eb R12: 00005580ff10086f
[    2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000008000
[    2.613080] FS:  00007f5c1da08940(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
[    2.613080] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    2.613080] CR2: 0000000000000000 CR3: 0000000037002000 CR4: 00000000003406f0
[    2.613080] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.613080] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.613080] Call Trace:
[    2.613080]  ? shmem_mknod+0xbf/0xd0
[    2.613080]  ima_post_path_mknod+0x1c/0x40
[    2.613080]  SyS_mknod+0x210/0x220
[    2.613080]  entry_SYSCALL_64_fastpath+0x1a/0xa5
[    2.613080] RIP: 0033:0x7f5c1bfde570
[    2.613080] RSP: 002b:00007ffde1c90dc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000085
[    2.613080] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5c1bfde570
[    2.613080] RDX: 0000000000000000 RSI: 0000000000008000 RDI: 00005580ff10086f
[    2.613080] RBP: 00007ffde1c91040 R08: 00005580ff10086f R09: 0000000000000000
[    2.613080] R10: 0000000000104000 R11: 0000000000000246 R12: 00005580ffb99660
[    2.613080] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000002
[    2.613080] Code: 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 56 44 8d 14 09 41 55 41 54 55 53 44 89 d3 09 cb 48 83 ec 38 48 8b 05 c5 03 29 01 <4c> 8b 20 4c 39 e0 0f 84 d7 01 00 00 4c 89 44 24 08 89 54 24 20
[    2.613080] RIP: ima_match_policy+0x23/0x390 RSP: ffffc90000193e88
[    2.613080] CR2: 0000000000000000
[    2.613080] ---[ end trace 9a9f0a8a73079f6a ]---
[    2.673052] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    2.673052]
[    2.675337] Kernel Offset: disabled
[    2.676405] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
Signed-off-by: NPetr Vorel <pvorel@suse.cz>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This is required to use SMACK and IMA/EVM together. Add it to the
default nomeasure/noappraise list like other pseudo filesystems.
Signed-off-by: NMartin Townsend <mtownsend1973@gmail.com>
Acked-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Replace nested ifs in the EVM xattr verification logic with a switch
statement, making the code easier to understand.

Also, add comments to the if statements in the out section and constify the
cause variable.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Acked-by: NSerge Hallyn <serge@hallyn.com>

The "goto out" statement doesn't have any purpose since there's no cleanup
to be done when returning early, so remove it. This also makes the rc
variable unnecessary so remove it as well.

Also, the xattr_len and fmt variables are redundant so remove them as well.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Acked-by: NSerge Hallyn <serge@hallyn.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

In keeping with the directive to get rid of VLAs [1], let's drop the VLA
from ima_audit_measurement(). We need to adjust the return type of
ima_audit_measurement, because now this function can fail if an allocation
fails.

[1]: https://lkml.org/lkml/2018/3/7/621

v2: just use audit_log_format instead of doing a second allocation
v3: ignore failures in ima_audit_measurement()
Signed-off-by: NTycho Andersen <tycho@tycho.ws>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

TPM_CRB driver provides TPM CRB 2.0 support.  If it is built as a
module, the TPM chip is registered after IMA init.  tpm_pcr_read() in
IMA fails and displays the following message even though eventually
there is a TPM chip on the system.

ima: No TPM chip found, activating TPM-bypass! (rc=-19)

Fix IMA Kconfig to select TPM_CRB so TPM_CRB driver is built in the kernel
and initializes before IMA.
Signed-off-by: NJiandi An <anjiandi@codeaurora.org>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This patch addresses the fuse privileged mounted filesystems in
environments which are unwilling to accept the risk of trusting the
signature verification and want to always fail safe, but are for example
using a pre-built kernel.

This patch defines a new builtin policy named "fail_securely", which can
be specified on the boot command line as an argument to "ima_policy=".
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Cc: Alban Crequy <alban@kinvolk.io>
Acked-by: NSerge Hallyn <serge@hallyn.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>

The IMA_APPRAISE and IMA_HASH policies overlap. Clear IMA_HASH properly.

Fixes: da1b0029 ("ima: support new "hash" and "dont_hash" policy actions")
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

This patch addresses the fuse privileged mounted filesystems in a "secure"
environment, with a correctly enforced security policy, which is willing
to assume the inherent risk of specific fuse filesystems that are well
defined and properly implemented.

As there is no way for the kernel to detect file changes, the kernel
ignores the cached file integrity results and re-measures, re-appraises,
and re-audits the file.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Cc: Alban Crequy <alban@kinvolk.io>
Acked-by: NSerge Hallyn <serge@hallyn.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>

FUSE can be mounted by unprivileged users either today with fusermount
installed with setuid, or soon with the upcoming patches to allow FUSE
mounts in a non-init user namespace.

This patch addresses the new unprivileged non-init mounted filesystems,
which are untrusted, by failing the signature verification.

This patch defines two new flags SB_I_IMA_UNVERIFIABLE_SIGNATURE and
SB_I_UNTRUSTED_MOUNTER.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Cc: Alban Crequy <alban@kinvolk.io>
Acked-by: NSerge Hallyn <serge@hallyn.com>
Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com>

The existing BPRM_CHECK functionality in IMA validates against the
credentials of the existing process, not any new credentials that the
child process may transition to. Add an additional CREDS_CHECK target
and refactor IMA to pass the appropriate creds structure. In
ima_bprm_check(), check with both the existing process credentials and
the credentials that will be committed when the new process is started.
This will not change behaviour unless the system policy is extended to
include CREDS_CHECK targets - BPRM_CHECK will continue to check the same
credentials that it did previously.

After this patch, an IMA policy rule along the lines of:

measure func=CREDS_CHECK subj_type=unconfined_t

will trigger if a process is executed and runs as unconfined_t, ignoring
the context of the parent process. This is in contrast to:

measure func=BPRM_CHECK subj_type=unconfined_t

which will trigger if the process that calls exec() is already executing
in unconfined_t, ignoring the context that the child process executes
into.
Signed-off-by: NMatthew Garrett <mjg59@google.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Changelog:
- initialize ima_creds_status

The function inode_cmp_iversion{+raw} is counter-intuitive, because it
returns true when the counters are different and false when these are equal.

Rename it to inode_eq_iversion{+raw}, which will returns true when
the counters are equal and false otherwise.
Signed-off-by: NGoffredo Baroncelli <kreijack@inwind.it>
Signed-off-by: NJeff Layton <jlayton@redhat.com>

Signed-off-by: NJeff Layton <jlayton@redhat.com>

The switch to uuid_t invereted the logic of verfication that &entry->fsuuid
is zero during parsing of "fsuuid=" rule. Instead of making sure the
&entry->fsuuid field is not attempted to be overwritten, we bail out for
perfectly correct rule.

Fixes: 787d8c53 ("ima/policy: switch to use uuid_t")
Signed-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Device number (the character device index) is not a stable identifier
for a TPM chip. That is the reason why every call site passes
TPM_ANY_NUM to tpm_chip_find_get().

This commit changes the API in a way that instead a struct tpm_chip
instance is given and NULL means the default chip. In addition, this
commit refines the documentation to be up to date with the
implementation.

Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> (@chip_num -> @chip part)
Signed-off-by: NJarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: NJason Gunthorpe <jgg@ziepe.ca>
Tested-by: NPrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>

i_version is only supported by a filesystem when the SB_I_VERSION
flag is set. This patch tests for the SB_I_VERSION flag before using
i_version. If we can't use i_version to detect a file change then we
must assume the file has changed in the last_writer path and remeasure
it.

On filesystems without i_version support IMA used to measure a file
only once and didn't detect any changes to a file. With this patch
IMA now works properly on these filesystems.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Simple but useful message log to the user in case of module appraise is
forced and fails due to the lack of file descriptor, that might be
caused by kmod calls to compressed modules.
Signed-off-by: NBruno E. O. Meneguele <brdeoliv@redhat.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

ima_rdwr_violation_check() retrieves the full path of a measured file by
calling ima_d_path(). If process_measurement() calls this function, it
reuses the pointer and passes it to the functions to measure/appraise/audit
an accessed file.

After commit bc15ed66 ("ima: fix ima_d_path() possible race with
rename"), ima_d_path() first tries to retrieve the full path by calling
d_absolute_path() and, if there is an error, copies the dentry name to the
buffer passed as argument.

However, ima_rdwr_violation_check() passes to ima_d_path() the pointer of a
local variable. process_measurement() might be reusing the pointer to an
area in the stack which may have been already overwritten after
ima_rdwr_violation_check() returned.

Correct this issue by passing to ima_rdwr_violation_check() the pointer of
a buffer declared in process_measurement().

Fixes: bc15ed66 ("ima: fix ima_d_path() possible race with rename")
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Line continuations with excess spacing causes unexpected output.

Based on commit 6f76b6fc ("CodingStyle: Document the exception of
not splitting user-visible strings, for grepping") recommendation.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The builtin ima_appraise_tcb policy, which is specified on the boot
command line, can be replaced with a custom policy, normally early in
the boot process.  Custom policies can be more restrictive in some ways,
like requiring file signatures, but can be less restrictive in other
ways, like not appraising mutable files.  With a less restrictive policy
in place, files in the builtin policy might not be hashed and labeled
with a security.ima hash.  On reboot, files which should be labeled in
the ima_appraise_tcb are not labeled, possibly preventing the system
from booting properly.

To resolve this problem, this patch extends the existing IMA policy
actions "measure", "dont_measure", "appraise", "dont_appraise", and
"audit" with "hash" and "dont_hash".  The new "hash" action will write
the file hash as security.ima, but without requiring the file to be
appraised as well.

For example, the builtin ima_appraise_tcb policy includes the rule,
"appraise fowner=0".  Adding the "hash fowner=0" rule to a custom
policy, will cause the needed file hashes to be calculated and written
as security.ima xattrs.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>

i_version is only supported by a filesystem when the SB_I_VERSION
flag is set. This patch tests for the SB_I_VERSION flag before using
i_version. If we can't use i_version to detect a file change then we
must assume the file has changed in the last_writer path and remeasure
it.

On filesystems without i_version support IMA used to measure a file
only once and didn't detect any changes to a file. With this patch
IMA now works properly on these filesystems.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NJeff Layton <jlayton@redhat.com>

Before IMA appraisal was introduced, IMA was using own integrity cache
lock along with i_mutex. process_measurement and ima_file_free took
the iint->mutex first and then the i_mutex, while setxattr, chmod and
chown took the locks in reverse order. To resolve the potential deadlock,
i_mutex was moved to protect entire IMA functionality and the redundant
iint->mutex was eliminated.

Solution was based on the assumption that filesystem code does not take
i_mutex further. But when file is opened with O_DIRECT flag, direct-io
implementation takes i_mutex and produces deadlock. Furthermore, certain
other filesystem operations, such as llseek, also take i_mutex.

More recently some filesystems have replaced their filesystem specific
lock with the global i_rwsem to read a file.  As a result, when IMA
attempts to calculate the file hash, reading the file attempts to take
the i_rwsem again.

To resolve O_DIRECT related deadlock problem, this patch re-introduces
iint->mutex. But to eliminate the original chmod() related deadlock
problem, this patch eliminates the requirement for chmod hooks to take
the iint->mutex by introducing additional atomic iint->attr_flags to
indicate calling of the hooks. The allowed locking order is to take
the iint->mutex first and then the i_rwsem.

Original flags were cleared in chmod(), setxattr() or removwxattr()
hooks and tested when file was closed or opened again. New atomic flags
are set or cleared in those hooks and tested to clear iint->flags on
close or on open.

Atomic flags are following:
* IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown,
  chgrp) and file attributes have changed. On file open, it causes IMA
  to clear iint->flags to re-evaluate policy and perform IMA functions
  again.
* IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called
  and extended attributes have changed. On file open, it causes IMA to
  clear iint->flags IMA_DONE_MASK to re-appraise.
* IMA_UPDATE_XATTR - indicates that security.ima needs to be updated.
  It is cleared if file policy changes and no update is needed.
* IMA_DIGSIG - indicates that file security.ima has signature and file
  security.ima must not update to file has on file close.
* IMA_MUST_MEASURE - indicates the file is in the measurement policy.

Fixes: Commit 65523218 ("xfs: remove i_iolock and use i_rwsem in
the VFS inode instead")
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The EVM signature includes the inode number and (optionally) the
filesystem UUID, making it impractical to ship EVM signatures in
packages. This patch adds a new portable format intended to allow
distributions to include EVM signatures. It is identical to the existing
format but hardcodes the inode and generation numbers to 0 and does not
include the filesystem UUID even if the kernel is configured to do so.

Removing the inode means that the metadata and signature from one file
could be copied to another file without invalidating it. This is avoided
by ensuring that an IMA xattr is present during EVM validation.

Portable signatures are intended to be immutable - ie, they will never
be transformed into HMACs.

Based on earlier work by Dmitry Kasatkin and Mikhail Kurinnoi.
Signed-off-by: NMatthew Garrett <mjg59@google.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Cc: Mikhail Kurinnoi <viewizard@viewizard.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Custom policies can require file signatures based on LSM labels.  These
files are normally created and only afterwards labeled, requiring them
to be signed.

Instead of requiring file signatures based on LSM labels, entire
filesystems could require file signatures.  In this case, we need the
ability of writing new files without requiring file signatures.

The definition of a "new" file was originally defined as any file with
a length of zero.  Subsequent patches redefined a "new" file to be based
on the FILE_CREATE open flag.  By combining the open flag with a file
size of zero, this patch relaxes the file signature requirement.

Fixes: 1ac202e9 ima: accept previously set IMA_NEW_FILE
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Commit b65a9cfc ("Untangling ima mess, part 2: deal with counters")
moved the call of ima_file_check() from may_open() to do_filp_open() at a
point where the file descriptor is already opened.

This breaks the assumption made by IMA that file descriptors being closed
belong to files whose access was granted by ima_file_check(). The
consequence is that security.ima and security.evm are updated with good
values, regardless of the current appraisal status.

For example, if a file does not have security.ima, IMA will create it after
opening the file for writing, even if access is denied. Access to the file
will be allowed afterwards.

Avoid this issue by checking the appraisal status before updating
security.ima.

Cc: stable@vger.kernel.org
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NJames Morris <james.l.morris@oracle.com>

A non-zero value is converted to 1 when assigned to a bool variable, so the
conditional operator in is_ima_appraise_enabled is redundant.

The value of a comparison operator is either 1 or 0 so the conditional
operator in ima_inode_setxattr is redundant as well.

Confirmed that the patch is correct by comparing the object file from
before and after the patch. They are identical.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Bool initializations should use true and false. Bool tests don't need
comparisons.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

When the user requests MODULE_CHECK policy and its kernel is compiled
with CONFIG_MODULE_SIG_FORCE not set, all modules would not load, just
those loaded in initram time. One option the user would have would be
set a kernel cmdline param (module.sig_enforce) to true, but the IMA
module check code doesn't rely on this value, it checks just
CONFIG_MODULE_SIG_FORCE.

This patch solves this problem checking for the exported value of
module.sig_enforce cmdline param intead of CONFIG_MODULE_SIG_FORCE,
which holds the effective value (CONFIG || param).
Signed-off-by: NBruno E. O. Meneguele <brdeoliv@redhat.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The hash_setup function always sets the hash_setup_done flag, even
when the hash algorithm is invalid.  This prevents the default hash
algorithm defined as CONFIG_IMA_DEFAULT_HASH from being used.

This patch sets hash_setup_done flag only for valid hash algorithms.

Fixes: e7a2ad7e "ima: enable support for larger default filedata hash
	algorithms"
Signed-off-by: NBoshi Wang <wangboshi@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The CONFIG_IMA_LOAD_X509 and CONFIG_EVM_LOAD_X509 options permit
loading x509 signed certificates onto the trusted keyrings without
verifying the x509 certificate file's signature.

This patch replaces the call to the integrity_read_file() specific
function with the common kernel_read_file_from_path() function.
To avoid verifying the file signature, this patch defines
READING_X509_CERTFICATE.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

All files matching a "measure" rule must be included in the IMA
measurement list, even when the file hash cannot be calculated.
Similarly, all files matching an "audit" rule must be audited, even when
the file hash can not be calculated.

The file data hash field contained in the IMA measurement list template
data will contain 0's instead of the actual file hash digest.

Note:
In general, adding, deleting or in anyway changing which files are
included in the IMA measurement list is not a good idea, as it might
result in not being able to unseal trusted keys sealed to a specific
TPM PCR value.  This patch not only adds file measurements that were
not previously measured, but specifies that the file hash value for
these files will be 0's.

As the IMA measurement list ordering is not consistent from one boot
to the next, it is unlikely that anyone is sealing keys based on the
IMA measurement list.  Remote attestation servers should be able to
process these new measurement records, but might complain about
these unknown records.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Reviewed-by: NDmitry Kasatkin <dmitry.kasatkin@huawei.com>

The securityfs policy file is removed unless additional rules can be
appended to the IMA policy (CONFIG_IMA_WRITE_POLICY), regardless as
to whether the policy is configured so that it can be displayed.

This patch changes this behavior, removing the securityfs policy file,
only if CONFIG_IMA_READ_POLICY is also not enabled.
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

ima starts several async crypto ops and  waits for their completions.
Move it over to generic code doing the same.
Signed-off-by: NGilad Ben-Yossef <gilad@benyossef.com>
Acked-by: NMimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

If the file doesn't have an xattr, ima_appraise_measurement sets cause to
"missing-hash" while if there's an xattr but it's a digest instead of a
signature it sets cause to "IMA-signature-required".

Fix it by setting cause to "IMA-signature-required" in both cases.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

If the func_tokens array uses the same indices as enum ima_hooks,
policy_func_show can be a lot simpler, and the func_* enum becomes
unnecessary.

Also, if we use the same macro trick used by kernel_read_file_id_str we can
use one hooks list for both the enum and the string array, making sure they
are always in sync (suggested by Mimi Zohar).

Finally, by using the printf pattern for the function token directly
instead of using the pt macro we can simplify policy_func_show even further
and avoid needing a temporary buffer.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

These changes are too small to warrant their own patches:

The keyid and sig_size members of struct signature_v2_hdr are in BE format,
so use a type that makes this assumption explicit. Also, use beXX_to_cpu
instead of __beXX_to_cpu to read them.

Change integrity_kernel_read to take a void * buffer instead of char *
buffer, so that callers don't have to use a cast if they provide a buffer
that isn't a char *.

Add missing #endif comment in ima.h pointing out which macro it refers to.

Add missing fall through comment in ima_appraise.c.

Constify mask_tokens and func_tokens arrays.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

Remove '+ 1' from 'size += strlen(entry->template_desc->name) + 1;',
as the template name is sent to userspace without the '\0' character.
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>

The binary_field_data structure definition has been removed from
ima_restore_template_data(). The lengths and data pointers are directly
stored into the template_data array of the ima_template_entry structure.
For template data, both the number of fields and buffer end checks can
be done, as these information are known (respectively from the template
descriptor, and from the measurement header field).
Signed-off-by: NRoberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: NMimi Zohar <zohar@linux.vnet.ibm.com>