UVD clocks are set to be disabled, when not in use.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NTom StDenis <Tom.StDenis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only for cards that are supported by powerplay.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Powerplay hwmgr already has an implementation, all we need to do is to call it.
Signed-off-by: NGrazvydas Ignotas <notasas@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In fence waiting, it never return -EDEADLK yet, so drop this function
here.
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

use same module parameter with powercontainment
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next

ZTE zxdrm driver support for 4.10:

This is the initial ZTE VOU display controller DRM/KMS driver.  There
are still some features to be added, like overlay plane, scaling, and
more output devices support.  But it's already useful with dual CRTCs
and HDMI display working.

[airlied: use drm_format_plane_cpp instead of legacy api]
* tag 'zxdrm-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  MAINTAINERS: add an entry for ZTE ZX DRM driver
  drm: zte: add initial vou drm driver
  dt-bindings: add bindings doc for ZTE VOU display controller

Here is the list of fixes that I have for drm/mali-dp. They've been on the mailing
lists for a while and merged into linux-next for a few weeks, but due to holiday and
travel to Linux Plumbers I did not send the pull request earlier. I don't know if
these patches can be pulled into v4.9 still (they will conflict with Ville Syrjälä's
cleanup of DRM_ROTATE series that is already in drm-next), but if you do that would
be great.

* 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld:
  drm: mali-dp: Clear CVAL when leaving config mode
  drm/arm: mark symbols static where possible
  drm: mali-dp: Add support for setting plane's rotation property from userspace.
  drm: mali-dp: Don't set DRM_PLANE_COMMIT_ACTIVE_ONLY
  drm: mali-dp: Store internal format and n_planes in plane state
  drm: mali-dp: Enable alpha blending
  drm: mali-dp: Refactor plane initialisation
  arm: mali-dp: Extract mode_config cleanup into malidp_fini
  drm: mali-dp: Add pitch alignment check for planes
  drm: mali-dp: Add pitch alignment check function
  drm: mali-dp: Set the drm->irq_enabled flag to match driver's state.
  drm: mali-dp: Clear the config_valid flag before using it in wait_event.

dw-hdmi i2c master controller

- add support for the HDMI I2C master controller, for boards that
  can have their DDC pins connected only to the HDMI TX directly.

* tag 'dw-hdmi-next-2016-09-19' of git://git.pengutronix.de/git/pza/linux:
  drm: bridge/dw_hdmi: add dw hdmi i2c bus adapter support
  drm: dw_hdmi: use of_get_i2c_adapter_by_node interface

imx-drm plane update cleanup, YUV formats

- request modeset if plane offsets changed, only the plane base
  address can be changed without disabling the plane IDMAC channel.
- cleanup of plane atomic_update
- remove unused ipu_cpmem_set_yuv_planar function
- support YUV 4:4:4, 4:2:2, NV12 and NV16 plane formats
- not only mask interrupts during irq init, also clear them
- remove a legacy check from imx-ldb
- add support to set the CSI downsizing bits
- silence an obnoxious warning during modeset

* tag 'imx-drm-next-2016-11-10' of git://git.pengutronix.de/git/pza/linux:
  gpu: ipu-di: silence videomode logspam
  gpu: ipu-v3: add ipu_csi_set_downsize
  drm/imx: imx-ldb: remove unnecessary double disable check
  gpu: ipu-v3: initially clear all interrupts
  drm/imx: ipuv3-plane: add support for YUV 4:2:2 and 4:4:4, NV12, and NV16 formats
  gpu: ipu-v3: add YUV 4:4:4 support
  gpu: ipu-cpmem: remove unused ipu_cpmem_set_yuv_planar function
  drm/imx: ipuv3-plane: let drm_plane_state_to_ubo/vbo handle chroma subsampling other than 4:2:0
  drm/imx: ipuv3-plane: merge ipu_plane_atomic_set_base into atomic_update
  drm/imx: ipuv3-plane: request modeset if plane offsets changed

- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
  various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over

* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
  drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
  drm/i915: Restrict DRM_DEBUG_MM automatic selection
  drm: Restrict stackdepot usage to builtin drm.ko
  drm/msm: module param to dump state on error irq
  drm/msm/mdp5: add atomic_print_state support
  drm/atomic: add debugfs file to dump out atomic state
  drm/atomic: add new drm_debug bit to dump atomic state
  drm: add helpers to go from plane state to drm_rect
  drm: add helper for printing to log or seq_file
  drm: helper macros to print composite types
  reservation: revert "wait only with non-zero timeout specified (v3)" v2
  drm/ttm: fix ttm_bo_wait
  dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
  dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
  drm/amdgpu: add the interface of waiting multiple fences (v4)
  dma-buf: return index of the first signaled fence (v2)
  MAINTAINERS: update Sync File Framework files
  dma-buf/sw_sync: put fence reference from the fence creation
  dma-buf/sw_sync: mark sync_timeline_create() static
  drm: Add stackdepot include for DRM_DEBUG_MM
  ...

- gpu idling rework for s/r (Imre)
- vlv mappable scanout fix
- speed up probing in resume (Lyude)
- dp audio workarounds for gen9 (Dhinakaran)
- more conversion to using dev_priv internally (Ville)
- more gen9+ wm fixes and cleanups (Maarten)
- shrinker cleanup&fixes (Chris)
- reorg plane init code (Ville)
- implement support for multiple timelines (prep work for scheduler)
  from Chris and all
- untangle dev->struct_mutex locking as prep for multiple timelines
  (Chris)
- refactor bxt phy code and collect it all in intel_dpio_phy.c (Ander)
- another gvt with bugfixes all over from Zhenyu
- piles of lspcon fixes from Imre
- 90/270 rotation fixes (Ville)
- guc log buffer support (Akash+Sagar)
- fbc fixes from Paulo
- untangle rpm vs. tiling-fences/mmaps (Chris)
- fix atomic commit to wait on the right fences (Daniel Stone)

* tag 'drm-intel-next-2016-11-08' of git://anongit.freedesktop.org/git/drm-intel: (181 commits)
  drm/i915: Update DRIVER_DATE to 20161108
  drm/i915: Mark CPU cache as dirty when used for rendering
  drm/i915: Add assert for no pending GPU requests during suspend/resume in LR mode
  drm/i915: Make sure engines are idle during GPU idling in LR mode
  drm/i915: Avoid early GPU idling due to race with new request
  drm/i915: Avoid early GPU idling due to already pending idle work
  drm/i915: Limit Valleyview and earlier to only using mappable scanout
  drm/i915: Round tile chunks up for constructing partial VMAs
  drm/i915: Remove the vma from the object list upon close
  drm/i915: Reinit polling before hpd when resuming
  drm/i915: Remove redundant reprobe in i915_drm_resume
  drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms
  drm/i915/dp: BDW cdclk fix for DP audio
  drm/i915: Fix pages pin counting around swizzle quirk
  drm/i915: Fix test on inputs for vma_compare()
  drm/i915/guc: Cache the client mapping
  drm/i915: Tidy slab cache allocations
  drm/i915: Introduce HAS_64BIT_RELOC
  drm/i915: Show the execlist queue in debugfs/i915_engine_info
  drm/i915: Unify global_list into global_link
  ...

0day continues to complain about trying to save a stacktrace for the
users of the drm_mm range allocator. This time, it is that m68k has no
save_stack_trace(), which is apparently guarded by STACKTRACE_SUPPORT.
Make it depend so!
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161109143906.11057-1-chris@chris-wilson.co.uk

Adapting the videomode to the hardware constraints is something that
can and must happen during normal operation and isn't something that
the user can avoid. So printing a warning each time it happens isn't
helpful.

Demote this message to the debug level.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>

DRM_DEBUG_MM is only valid if the DRM.ko is builtin as currently
depot_save_stack is not exported.

Fixes: 5c7fcf2d ("drm/i915: Enable drm_mm debug when enabling DRM_I915_DEBUG")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-1-chris@chris-wilson.co.uk

I misread the kbuild result thinking that we had missed the include
(which we had for completeness anyway), what kbuild was actually warning
me about was that depot_save_stack was not exported.

Temporarily fix this by only selecting STACKDEPOT iff drm.ko is builtin
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: 5705670d ("drm: Track drm_mm allocators and show leaks on shutdown")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-2-chris@chris-wilson.co.uk

Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-8-git-send-email-robdclark@gmail.com

We subclass drm_plane_state, so add mdp5_plane_atomic_print_state() to
dump out our own driver specific plane state.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-7-git-send-email-robdclark@gmail.com

Useful to dump current state from debugfs, if turning on the drm.debug
bit is too much overhead.

The drm_state_dump() can also be used by drivers, for example to
implement a module param that dumps state on error irqs.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-6-git-send-email-robdclark@gmail.com

The contents of drm_{plane,crtc,connector}_state is dumped before
commit.  If a driver extends any of the state structs, it can implement
the corresponding funcs->atomic_print_state() to add it's own driver
specific state.
Signed-off-by: NRob Clark <robdclark@gmail.com>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: NSean Paul <seanpaul@chromium.org>

Sometimes it is nice not to duplicate equivalent printk() and
seq_printf() code.

v2: simplify things w/ va_format, and use dev_printk, docs
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-3-git-send-email-robdclark@gmail.com

I'll want to print things in a similar way in a later patch.  This will
make it easier.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-2-git-send-email-robdclark@gmail.com

Reverts commit fb8b7d2b
	("reservation: wait only with non-zero timeout specified (v3)")

Otherwise signaling might never be activated on the fences. This can
result in infinite waiting with hardware which has unreliable interrupts.

v2: still return one when the timeout is zero and we don't have any fences.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
  [sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-4-git-send-email-alexander.deucher@amd.com

reservation_object_wait_timeout_rcu() should enable signaling even with a
zero timeout, but ttm_bo_wait() can also be called from atomic context and
then it is not a good idea to do this.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
  [sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-3-git-send-email-alexander.deucher@amd.com

Reverts commit 847b19a3
	("dma-buf/fence: don't wait when specified timeout is zero")

When we don't call the wait function software signaling might never be
activated. This can cause infinite polling loops with unreliable interrupt
driven hardware.

v2: rebase on drm-next
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
  [sumits: reword commit msg for checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-2-git-send-email-alexander.deucher@amd.com

Kernel functions taking a timeout usually return 1 on success even
when they get a zero timeout.

v2: agd: rebase on drm-next
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NChunming Zhou <david1.zhou@amd.com>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-1-git-send-email-alexander.deucher@amd.com

v2: agd: rebase and squash in all the previous optimizations and
changes so everything compiles.
v3: squash in Slava's 32bit build fix
v4: rebase on drm-next (fence -> dma_fence),
    squash in Monk's ioctl update patch
Signed-off-by: NJunwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
 [sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478290570-30982-2-git-send-email-alexander.deucher@amd.com

Return the index of the first signaled fence.  This information
is useful in some APIs like Vulkan.

v2: rebase on drm-next (fence -> dma_fence)
Signed-off-by: Nmonk.liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
 [sumits: fix warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478290570-30982-1-git-send-email-alexander.deucher@amd.com

Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477515862-7980-1-git-send-email-gustavo@padovan.org

Once sw_sync_ioctl_create_fence() returns we no longer have the
*pt pointer to the fence base object thus we need to put the reference
we have from the fence creation to keep a correct reference accounting.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477515599-7685-1-git-send-email-gustavo@padovan.org

We get 1 warning when building kernel with W=1:
drivers/dma-buf/sw_sync.c:87:23: warning: no previous prototype for 'sync_timeline_create' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NSumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474202961-10099-1-git-send-email-baoyou.xie@linaro.org

0day found that stackdepot.h doesn't get automatically included on all
architectures, so remember to add our #include.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: 5705670d ("drm: Track drm_mm allocators and show leaks on shutdown")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108115601.22873-1-chris@chris-wilson.co.uk

It's possible for CVAL to get set whilst we are in config mode. If this
happens, afer we leave config mode the HW will latch whatever
configuration is in the registers at the next vsync. Most likely this
will be a partial configuration, as we'll be racing against the ongoing
atomic_commit.

To avoid this, clear CVAL before leaving config mode.
Signed-off-by: NBrian Starkey <brian.starkey@arm.com>
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>

Some of the members of struct drm_plane had extra comments so for these
add inline kernel comment to consolidate all documentation in one place.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
[danvet: Bikeshed a bit more to have real paragraphs with real
sentences.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-4-git-send-email-gustavo@padovan.org

drm_atomic_set_fence_for_plane() is smart and won't overwrite
plane_state->fence if the user already set an explicit fence there.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-3-git-send-email-gustavo@padovan.org

drm_atomic_set_fence_for_plane() is smart and won't overwrite
plane_state->fence if the user already set an explicit fence there.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-2-git-send-email-gustavo@padovan.org

This new function should be used by drivers when setting a implicit
fence for the plane. It abstracts the fact that the user might have
chosen explicit fencing instead.
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-1-git-send-email-gustavo@padovan.org

It is kind of a pointless restriction.  If userspace does silly things
like using crtcA's cursor plane on crtcB, and then setcursor on crtcA,
it will end up with the overlay disabled on crtcB.  But userspace is
allowed to shoot itself like this.

v2: don't WARN_ON() if caller did not set ->possible_crtcs.  This keeps
    the existing behavior by default, if caller does not set the
    ->possible_crtcs.
Signed-off-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478357521-26542-1-git-send-email-robdclark@gmail.com