- 26 1月, 2008 15 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Tuner-type were correctly filled only by the hint function. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
From: Mauro Carvalho Chehab <mchehab@infradead.org> In file included from drivers/media/video/em28xx/em28xx-i2c.c:31: drivers/media/video/tuner-xc2028.h:10:26: error: dvb_frontend.h: No such file or directory In file included from drivers/media/video/em28xx/em28xx-i2c.c:31: drivers/media/video/tuner-xc2028.h:32: warning: 'struct dvb_frontend' declared inside parameter list drivers/media/video/tuner-xc2028.h:32: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Sascha Sommer 提交于
Adds autodetection support for the Cinergy200 USB and the VGear PocketTV. Whenever a usb device with generic empia em2800 usb ids is detected the device gets scanned for connected i2c devices. If the device list matches an em2800 device in the device list the model id gets changed accordingly. Signed-off-by: NSascha Sommer <saschasommer@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Sascha Sommer 提交于
attached patch adds support for the vgear pockettv. It seems to require a write to another register for audio to work. I checked my old cinergydrv and we did the same register write there. I therefore enabled it for all em2800 based devices. Signed-off-by: NSascha Sommer <saschasommer@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Sascha Sommer 提交于
The attached patch modifies the em28xx driver so that there can be ioctls from multiple different threads. This is necessary for capture apps like MPlayer that use different threads for capturing and channel tuning. Now the locking is only done for the ioctls that change properties of the device or access the i2c bus. It also removes some locks that look unnecessary: In em28xx_init_dev: the videodevice is not registered yet so nothing can access the hardware meanwhile, the device struct is not assigned to the interface yet so no race with disconnect is possible In em28xx_release_resources: it gets only called when dev->lock is already held Signed-off-by: NSascha Sommer <saschasommer@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This patch adds a function to allow trying to detect boards that shares the generic IDs. The current detection method is based at eeprom checksum. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
- Television is now default; - Add HVR950 name at the entry. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
This patch adds USB ID for HVR-950. It also adds the callback for handling firmware loading. Thanks to Markus Reichberger for the reset commands. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Also replaces all occurrences of TUNER_XCEIVE_XC3028 to TUNER_XC2028. Some work is still may be required to make sure that non-tm6000 drivers will be capable of using tuner-xc2028. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 12 12月, 2007 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Sascha Sommer 提交于
The attached patch is required so that the autodetecion code also works after a reboot. Setting the I2C speed does not seem to be supported for em2800. Signed-off-by: NSascha Sommer <saschasommer@freenet.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 05 11月, 2007 4 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Ludovico Cavedon 提交于
From: Ludovico Cavedon <cavedon@sssup.it> Signed-off-by: NLudovico Cavedon <cavedon@sssup.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Trent Piepho 提交于
This em28xx-video.c uses functions from this header, but doesn't include it. It depends on some v4l headers included two levels down including poll.h, which includes mm.h. These v4l headers might change, so it's best to include the headers needed directly. It also causes problems for the out of core build system's backward compatibility with older kernels, which is the real reason I bothered to create a patch for something that would otherwise be so minor that it would hardly be worth the trouble. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Randy Dunlap 提交于
All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 22 10月, 2007 2 次提交
-
-
由 Florin Malita 提交于
Coverity (CID 1929) spotted the following: if a transfer buffer allocation fails, the last allocated urb is leaked (it hasn't been stored in dev->urb[] yet so em28xx_uninit_isoc misses it). The patch also includes a small typo fix. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Mauro Carvalho Chehab 提交于
struct video_device used to define a .hardware field. While initialized on severl drivers, this field is never used inside V4L. However, drivers using it need to include the old V4L1 header. This seems to cause compilation troubles with some random configs. Better just to remove it from all drivers. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 20 10月, 2007 1 次提交
-
-
由 Robert P. J. Day 提交于
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
- 14 10月, 2007 1 次提交
-
-
由 David Brownell 提交于
This removes NOP implementations of i2c_algorithm.algo_control. With this change, there are no implementations of this hook in the kernel.org tree ... that hook seems about ripe to remove. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Trent Piepho 提交于
The rest of V4L files. There is one list_for_each+list_entry in cpia_pp.c that wasn't changed because it expects the loop iterator to remain NULL if the list is empty. A bug in vivi is fixed; the 'safe' version needs to be used because the loop deletes the list entries. Simplify a second loop in vivi and get rid if an un-used variable in that loop. Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 10 10月, 2007 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Rolf Eike Beer 提交于
Some lines later filp->private_data is initialized to dev again. Since there are some checks that might fail in the mean time keep the later version. Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 23 8月, 2007 1 次提交
-
-
由 Jesper Juhl 提交于
If, in em28xx_usb_probe() the memory allocation dev->alt_max_pkt_size = kmalloc(32* dev->num_alt,GFP_KERNEL); fails, then we'll bail out and return -ENOMEM. The problem is that in that case we don't free the storage allocated to 'dev', thus causing a memory leak. This patch fixes the leak by freeing 'dev' before we return -ENOMEM. This fixes Coverity bug #647. Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 23 5月, 2007 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 16 5月, 2007 1 次提交
-
-
由 Al Viro 提交于
.. because video-buf.c requires PCI, and VIDEO_EM28XX selects it. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 5月, 2007 3 次提交
-
-
由 Jan Engelhardt 提交于
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Opdenacker 提交于
Signed-off-by: NMichael Opdenacker <michael@free-electrons.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
由 Robert P. J. Day 提交于
Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 03 5月, 2007 1 次提交
-
-
由 Jean Delvare 提交于
I noticed that many source files include <linux/pci.h> while they do not appear to need it. Here is an attempt to clean it all up. In order to find all possibly affected files, I searched for all files including <linux/pci.h> but without any other occurence of "pci" or "PCI". I removed the include statement from all of these, then I compiled an allmodconfig kernel on both i386 and x86_64 and fixed the false positives manually. My tests covered 66% of the affected files, so there could be false positives remaining. Untested files are: arch/alpha/kernel/err_common.c arch/alpha/kernel/err_ev6.c arch/alpha/kernel/err_ev7.c arch/ia64/sn/kernel/huberror.c arch/ia64/sn/kernel/xpnet.c arch/m68knommu/kernel/dma.c arch/mips/lib/iomap.c arch/powerpc/platforms/pseries/ras.c arch/ppc/8260_io/enet.c arch/ppc/8260_io/fcc_enet.c arch/ppc/8xx_io/enet.c arch/ppc/syslib/ppc4xx_sgdma.c arch/sh64/mach-cayman/iomap.c arch/xtensa/kernel/xtensa_ksyms.c arch/xtensa/platform-iss/setup.c drivers/i2c/busses/i2c-at91.c drivers/i2c/busses/i2c-mpc.c drivers/media/video/saa711x.c drivers/misc/hdpuftrs/hdpu_cpustate.c drivers/misc/hdpuftrs/hdpu_nexus.c drivers/net/au1000_eth.c drivers/net/fec_8xx/fec_main.c drivers/net/fec_8xx/fec_mii.c drivers/net/fs_enet/fs_enet-main.c drivers/net/fs_enet/mac-fcc.c drivers/net/fs_enet/mac-fec.c drivers/net/fs_enet/mac-scc.c drivers/net/fs_enet/mii-bitbang.c drivers/net/fs_enet/mii-fec.c drivers/net/ibm_emac/ibm_emac_core.c drivers/net/lasi_82596.c drivers/parisc/hppb.c drivers/sbus/sbus.c drivers/video/g364fb.c drivers/video/platinumfb.c drivers/video/stifb.c drivers/video/valkyriefb.c include/asm-arm/arch-ixp4xx/dma.h sound/oss/au1550_ac97.c I would welcome test reports for these files. I am fine with removing the untested files from the patch if the general opinion is that these changes aren't safe. The tested part would still be nice to have. Note that this patch depends on another header fixup patch I submitted to LKML yesterday: [PATCH] scatterlist.h needs types.h http://lkml.org/lkml/2007/3/01/141Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 28 4月, 2007 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 15 2月, 2007 1 次提交
-
-
由 Tim Schmielau 提交于
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. [akpm@sdl.org: dvb fix] Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 12月, 2006 1 次提交
-
-
由 David Brownell 提交于
- CAFE_CCIC needs to depend on PCI, else "allyesconfig" breaks on systems without PCI - em28xx-video can't udelay(2500) else "allyesconfig" breaks on systems that refuse to spin that long (I saw it on ARM) Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 11 10月, 2006 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-