- 09 1月, 2012 16 次提交
-
-
由 Al Viro 提交于
now that we don't need it for sget() anymore... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
the latter can be obtained from the former (by looking as ->tree_root) just as cheaply as we currently are doing the other way round. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... and don't bother with it after btrfs_fill_super() failure - ->kill_sb() (unlike ->put_super()) will be called even if we have not got non-NULL ->s_root. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... all the way up into btrfs_mount(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
We do not (fortunately) modify ->s_fs_info of superblock on the fly in btrfs_fill_super(); apparent assignment is a no-op. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
It returns either ERR_PTR(-ve) or sb->s_fs_info. The latter can be found by caller just as well, TYVM, no need to return it. Just return -ve or 0... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
close_ctree() uses a weird mix of accesses to root->fs_info and its value at the beginning of function stored in local variable. Since ->fs_info *never* changes, let's just use the local variable to avoid confusion. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
A new helper: btrfs_alloc_root(fs_info); allocates btrfs_root and sets ->fs_info. All places allocating the suckers converted to it. At that point we *never* reassign ->fs_info of btrfs_root; it's set before anyone sees the address of newly allocated struct btrfs_root and never assigned anywhere else. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
move assignments to ->fs_info in open_ctree() up, to the place just after the original allocations. Assignment for tree_root becomes a no-op - we'd obtained fs_info from tree_root->fs_info in the first place. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
lift assignment to callers of find_and_setup_root() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
take assignment of ->fs_info to callers of __setup_root() Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
pathname resolution under a global mutex, taken on some paths in ->mount() is a Bad Idea(tm) - think what happens if said pathname resolution triggers automount of some btrfs instance and walks into attempt to grab the same mutex. Deadlock - we are waiting for daemon to finish walking the path, daemon is waiting for us to release the mutex... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Do *NOT* skip doomed superblocks in btrfs_test_super(); we want sget() to wait for their shutdown to complete. Since we don't mutilate ->s_fs_info in ->put_super() anymore (or free what it used to point to until the superblock is past being findable by sget()), we can just DTRT there and report a match. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
... and move free_fs_info() to that, out of ->put_super(). Do NOT set ->s_fs_info to NULL in the latter; we need it for sget() to be able to see and wait for fs in the middle of umount if we get a mount/umount race. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
We need fs_info and root to live until the moment when the victim superblock leaves the list, so we need to postpone free_fs_info() until after ->put_super(). The call is buried in close_ctree(), though, so we need to lift it into the callers (including btrfs_put_super()) first. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 07 1月, 2012 11 次提交
-
-
由 Jan Kara 提交于
Make reiserfs properly display mount options in /proc/mounts. CC: reiserfs-devel@vger.kernel.org Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
If there are any inodes on the super block that have been unlinked (i_nlink == 0) but have not yet been deleted then prevent the remounting the super block read-only. Reported-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Add a new counter to the superblock that keeps track of unlinked but not yet deleted inodes. Do not WARN_ON if set_nlink is called with zero count, just do a ratelimited printk. This happens on xfs and probably other filesystems after an unclean shutdown when the filesystem reads inodes which already have zero i_nlink. Reported by Christoph Hellwig. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Currently remouting superblock read-only is racy in a major way. With the per mount read-only infrastructure it is now possible to prevent most races, which this patch attempts. Before starting the remount read-only, iterate through all mounts belonging to the superblock and if none of them have any pending writes, set sb->s_readonly_remount. This indicates that remount is in progress and no further write requests are allowed. If the remount succeeds set MS_RDONLY and reset s_readonly_remount. If the remounting is unsuccessful just reset s_readonly_remount. This can result in transient EROFS errors, despite the fact the remount failed. Unfortunately hodling off writes is difficult as remount itself may touch the filesystem (e.g. through load_nls()) which would deadlock. A later patch deals with delayed writes due to nlink going to zero. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Miklos Szeredi 提交于
Keep track of vfsmounts belonging to a superblock. List is protected by vfsmount_lock. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Tested-by: NToshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 06 1月, 2012 1 次提交
-
-
由 Linus Torvalds 提交于
We're doing some odd things there, which already messes up various users (see the net/socket.c code that this removes), and it was going to add yet more crud to the block layer because of the incorrect error code translation. ENOIOCTLCMD is not an error return that should be returned to user mode from the "ioctl()" system call, but it should *not* be translated as EINVAL ("Invalid argument"). It should be translated as ENOTTY ("Inappropriate ioctl for device"). That EINVAL confusion has apparently so permeated some code that the block layer actually checks for it, which is sad. We continue to do so for now, but add a big comment about how wrong that is, and we should remove it entirely eventually. In the meantime, this tries to keep the changes localized to just the EINVAL -> ENOTTY fix, and removing code that makes it harder to do the right thing. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 1月, 2012 1 次提交
-
-
由 Al Viro 提交于
bitmap size sanity checks should be done *before* allocating ->s_root; there their cleanup on failure would be correct. As it is, we do iput() on root inode, but leak the root dentry... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 1月, 2012 11 次提交
-
-
由 Steve French 提交于
Turned out the ntlmv2 (default security authentication) upgrade was harder to test than expected, and we ran out of time to test against Apple and a few other servers that we wanted to. Delay upgrade of default security from ntlm to ntlmv2 (on mount) to 3.3. Still works fine to specify it explicitly via "sec=ntlmv2" so this should be fine. Acked-by: NJeff Layton <jlayton@samba.org> Signed-off-by: NSteve French <smfrench@gmail.com>
-
由 Al Viro 提交于
[folded fix for missing magic.h from Tetsuo Handa] Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
rationale: that stuff is far tighter bound to fs/namespace.c than to the guts of procfs proper. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-