- 03 4月, 2013 8 次提交
-
-
由 Neil Horman 提交于
This backtrace was recently reported on a 3.9 kernel: Actual results: from syslog /var/log/messsages: kernel: [17539.340285] ------------[ cut here ]------------ kernel: [17539.341012] WARNING: at lib/dma-debug.c:937 check_unmap+0x493/0x960() kernel: [17539.341012] Hardware name: MS-7125 kernel: [17539.341012] forcedeth 0000:00:0a.0: DMA-API: device driver failed to check map error[device address=0x0000000013c88000] [size=544 bytes] [mapped as page] kernel: [17539.341012] Modules linked in: fuse ebtable_nat ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_nat nf_nat_ipv6 ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack bnep bluetooth rfkill ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_cmipci snd_mpu401_uart snd_hda_intel snd_intel8x0 snd_opl3_lib snd_ac97_codec gameport snd_hda_codec snd_rawmidi ac97_bus snd_hwdep snd_seq snd_seq_device snd_pcm snd_page_alloc snd_timer snd k8temp soundcore serio_raw i2c_nforce2 forcedeth ata_generic pata_acpi nouveau video mxm_wmi wmi i2c_algo_bit drm_kms_helper ttm drm i2c_core sata_sil pata_amd sata_nv uinput kernel: [17539.341012] Pid: 17340, comm: sshd Not tainted 3.9.0-0.rc4.git0.1.fc19.i686.PAE #1 kernel: [17539.341012] Call Trace: kernel: [17539.341012] [<c045573c>] warn_slowpath_common+0x6c/0xa0 kernel: [17539.341012] [<c0701953>] ? check_unmap+0x493/0x960 kernel: [17539.341012] [<c0701953>] ? check_unmap+0x493/0x960 kernel: [17539.341012] [<c04557a3>] warn_slowpath_fmt+0x33/0x40 kernel: [17539.341012] [<c0701953>] check_unmap+0x493/0x960 kernel: [17539.341012] [<c049238f>] ? sched_clock_cpu+0xdf/0x150 kernel: [17539.341012] [<c0701e87>] debug_dma_unmap_page+0x67/0x70 kernel: [17539.341012] [<f7eae8f2>] nv_unmap_txskb.isra.32+0x92/0x100 Its pretty plainly the result of an skb fragment getting unmapped without having its initial mapping operation checked for errors. This patch corrects that. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chen Gang 提交于
delete useless 'break' after 'return'. let 'return 0' instead of 'return (0)' also give a comment for 'break' to let readers notice it. Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
warning: 'pf_info.max_tx_ques' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Fix for smatch tool reported error drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c:2029 qlcnic_probe() error: potential NULL dereference 'adapter'. o While returning from an error path in probe, adapter is not initialized. So do not access adapter in cleanup path. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
[net-next:master 301/302] drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c:563 qlcnic_set_multi() error: potential null dereference 'cur'. (kzalloc returns null) o Break out of the loop after memory allocation failure. Program all the MAC addresses that were cached in the return path. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neal Cardwell 提交于
Remove a declaration left over from the TCPCT-ectomy. This sysctl is no longer referenced anywhere since 1a2c6181 ("tcp: Remove TCPCT"). Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit 00cfec37 (net: add a synchronize_net() in netdev_rx_handler_unregister()) allows us to remove the synchronized_net() call from del_nbp() Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Veaceslav Falico <vfalico@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2013 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Conflicts: net/mac80211/sta_info.c net/wireless/core.h Two minor conflicts in wireless. Overlapping additions of extern declarations in net/wireless/core.h and a bug fix overlapping with the addition of a boolean parameter to __ieee80211_key_free(). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2013 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile由 Linus Torvalds 提交于
Pull arch/tile fix from Chris Metcalf: "This change allows newer Tilera boot tools to work correctly with current (and stable) kernels by using the right filename to get the initramfs from the Tilera hypervisor filesystem." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: expect new initramfs name from hypervisor file system
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) sadb_msg prepared for IPSEC userspace forgets to initialize the satype field, fix from Nicolas Dichtel. 2) Fix mac80211 synchronization during station removal, from Johannes Berg. 3) Fix IPSEC sequence number notifications when they wrap, from Steffen Klassert. 4) Fix cfg80211 wdev tracing crashes when add_virtual_intf() returns an error pointer, from Johannes Berg. 5) In mac80211, don't call into the channel context code with the interface list mutex held. From Johannes Berg. 6) In mac80211, if we don't actually associate, do not restart the STA timer, otherwise we can crash. From Ben Greear. 7) Missing dma_mapping_error() check in e1000, ixgb, and e1000e. From Christoph Paasch. 8) Fix sja1000 driver defines to not conflict with SH port, from Marc Kleine-Budde. 9) Don't call il4965_rs_use_green with a NULL station, from Colin Ian King. 10) Suspend/Resume in the FEC driver fail because the buffer descriptors are not initialized at all the moments in which they should. Fix from Frank Li. 11) cpsw and davinci_emac drivers both use the wrong interface to restart a stopped TX queue. Use netif_wake_queue not netif_start_queue, the latter is for initialization/bringup not active management of the queue. From Mugunthan V N. 12) Fix regression in rate calculations done by psched_ratecfg_precompute(), missing u64 type promotion. From Sergey Popovich. 13) Fix length overflow in tg3 VPD parsing, from Kees Cook. 14) AOE driver fails to allocate enough headroom, resulting in crashes. Fix from Eric Dumazet. 15) RX overflow happens too quickly in sky2 driver because pause packet thresholds are not programmed correctly. From Mirko Lindner. 16) Bonding driver manages arp_interval and miimon settings incorrectly, disabling one unintentionally disables both. Fix from Nikolay Aleksandrov. 17) smsc75xx drivers don't program the RX mac properly for jumbo frames. Fix from Steve Glendinning. 18) Fix off-by-one in Codel packet scheduler. From Vijay Subramanian. 19) Fix packet corruption in atl1c by disabling MSI support, from Hannes Frederic Sowa. 20) netdev_rx_handler_unregister() needs a synchronize_net() to fix crashes in bonding driver unload stress tests. From Eric Dumazet. 21) rxlen field of ks8851 RX packet descriptors not interpreted correctly (it is 12 bits not 16 bits, so needs to be masked after shifting the 32-bit value down 16 bits). Fix from Max Nekludov. 22) Fix missed RX/TX enable in sh_eth driver due to mishandling of link change indications. From Sergei Shtylyov. 23) Fix crashes during spurious ECI interrupts in sh_eth driver, also from Sergei Shtylyov. 24) dm9000 driver initialization is done wrong for revision B devices with DSP PHY, from Joseph CHANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits) DM9000B: driver initialization upgrade sh_eth: make 'link' field of 'struct sh_eth_private' *int* sh_eth: workaround for spurious ECI interrupt sh_eth: fix handling of no LINK signal ks8851: Fix interpretation of rxlen field. net: add a synchronize_net() in netdev_rx_handler_unregister() MAINTAINERS: Update netxen_nic maintainers list atl1e: drop pci-msi support because of packet corruption net: fq_codel: Fix off-by-one error net: calxedaxgmac: Wake-on-LAN fixes net: calxedaxgmac: fix rx ring handling when OOM net: core: Remove redundant call to 'nf_reset' in 'dev_forward_skb' smsc75xx: fix jumbo frame support net: fix the use of this_cpu_ptr bonding: fix disabling of arp_interval and miimon ipv6: don't accept node local multicast traffic from the wire sky2: Threshold for Pause Packet is set wrong sky2: Receive Overflows not counted aoe: reserve enough headroom on skbs line up comment for ndo_bridge_getlink ...
-
由 Keller, Jacob E 提交于
Currently, when a socket receives something on the error queue it only wakes up the socket on select if it is in the "read" list, that is the socket has something to read. It is useful also to wake the socket if it is in the error list, which would enable software to wait on error queue packets without waking up for regular data on the socket. The main use case is for receiving timestamped transmit packets which return the timestamp to the socket via the error queue. This enables an application to select on the socket for the error queue only instead of for the regular traffic. -v2- * Added the SO_SELECT_ERR_QUEUE socket option to every architechture specific file * Modified every socket poll function that checks error queue Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Cc: Jeffrey Kirsher <jeffrey.t.kirsher@intel.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Matthew Vick <matthew.vick@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joseph CHANG 提交于
Fix bug for DM9000 revision B which contain a DSP PHY DM9000B use DSP PHY instead previouse DM9000 revisions' analog PHY, So need extra change in initialization, For explicity PHY Reset and PHY init parameter, and first DM9000_NCR reset need NCR_MAC_LBK bit by dm9000_probe(). Following DM9000_NCR reset cause by dm9000_open() clear the NCR_MAC_LBK bit. Without this fix, Power-up FIFO pointers error happen around 2% rate among Davicom's customers' boards. With this fix, All above cases can be solved. Signed-off-by: NJoseph CHANG <josright123@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The 'link' field of 'struct sh_eth_private' has type 'enum phy_state' while the 'link' field of 'struct phy_device' is merely *int* (having values 0 and 1) and the former field gets assigned from the latter. Make the field match, getting rid of incorrectly used PHY_DOWN value in assignments/comparisons. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
At least on Renesas R8A7778, EESR.ECI interrupt seems to fire regardless of its mask in EESIPR register. I can 100% reproduce it with the following scenario: target is booted with 'ip=on' option, and so IP-Config opens SoC Ether device but doesn't get a proper reply and then succeeds with on-board SMC chip; then I login and try to bring up the SoC Ether device with 'ifconfig', and I get an ECI interrupt once request_irq() is called by sh_eth_open() (while interrupt mask in EESIPR register is all 0), if that interrupt is accompanied by a pending EESR.FRC (frame receive completion) interrupt, I get kernel oops in sh_eth_rx() because sh_eth_ring_init() hasn't been called yet! The solution I worked out is the following: in sh_eth_interrupt(), mask the interrupt status from EESR register with the interrupt mask from EESIPR register in order not to handle the disabled interrupts -- but forcing EESIPR.M_ECI bit in this mask set because we always need to fully handle EESR.ECI interrupt in sh_eth_error() in order to quench it (as it doesn't get cleared by just writing 1 to the this bit as all the other interrupts). While at it, remove unneeded initializer for 'intr_status' variable and give it *unsigned long* type, matching the type of sh_eth_read()'s result; fix comment. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: NMax Filippov <max.filippov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sergei Shtylyov 提交于
The code handling the absent LINK signal (or the absent PSR register -- which reflects the state of this signal) is quite naive and has probably never really worked. It's probably enough to say that this code is executed only on the LINK change interrupt (sic!) but even if we actually have the signal and choose to ignore it (it might be connected to PHY's link/activity LED output as on the Renesas BOCK-W board), sh_eth_adjust_link() on which this code relies to update 'mdp->link' gets executed later than the LINK change interrupt where it is checked, and so RX/TX never get enabled via ECMR register. So, ignore the LINK changed interrupt iff LINK signal is absent (or just chosen not to be used) or PSR register is absent, and enable/disable RX/TX directly in sh_eth_adjust_link() in this case. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull slave-dmaengine fixes from Vinod Koul: "Two fixes for slave-dmaengine. The first one is for making slave_id value correct for dw_dmac and the other one fixes the endieness in DT parsing" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dw_dmac: adjust slave_id accordingly to request line base dmaengine: dw_dma: fix endianess for DT xlate function
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: "For a some fixes for Kernel 3.9: - subsystem build fix when VIDEO_DEV=y, VIDEO_V4L2=m and I2C=m - compilation fix for arm multiarch preventing IR_RX51 to be selected - regression fix at bttv crop logic - s5p-mfc/m5mols/exynos: a few fixes for cameras on exynos hardware" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] [REGRESSION] bt8xx: Fix too large height in cropcap [media] fix compilation with both V4L2 and I2C as 'm' [media] m5mols: Fix bug in stream on handler [media] s5p-fimc: Do not attempt to disable not enabled media pipeline [media] s5p-mfc: Fix encoder control 15 issue [media] s5p-mfc: Fix frame skip bug [media] s5p-fimc: send valid m2m ctx to fimc_m2m_job_finish [media] exynos-gsc: send valid m2m ctx to gsc_m2m_job_finish [media] fimc-lite: Fix the variable type to avoid possible crash [media] fimc-lite: Initialize 'step' field in fimc_lite_ctrl structure [media] ir: IR_RX51 only works on OMAP2
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "Alright, this time from 10K up in the air. Collection of fixes that have been queued up since the merge window opened, hence postponed until later in the cycle. The pull request contains: - A bunch of fixes for the xen blk front/back driver. - A round of fixes for the new IBM RamSan driver, fixing various nasty issues. - Fixes for multiple drives from Wei Yongjun, bad handling of return values and wrong pointer math. - A fix for loop properly killing partitions when being detached." * tag 'for-linus-20130331' of git://git.kernel.dk/linux-block: (25 commits) mg_disk: fix error return code in mg_probe() rsxx: remove unused variable rsxx: enable error return of rsxx_eeh_save_issued_dmas() block: removes dynamic allocation on stack Block: blk-flush: Fixed indent code style cciss: fix invalid use of sizeof in cciss_find_cfgtables() loop: cleanup partitions when detaching loop device loop: fix error return code in loop_add() mtip32xx: fix error return code in mtip_pci_probe() xen-blkfront: remove frame list from blk_shadow xen-blkfront: pre-allocate pages for requests xen-blkback: don't store dev_bus_addr xen-blkfront: switch from llist to list xen-blkback: fix foreach_grant_safe to handle empty lists xen-blkfront: replace kmalloc and then memcpy with kmemdup xen-blkback: fix dispatch_rw_block_io() error path rsxx: fix missing unlock on error return in rsxx_eeh_remap_dmas() Adding in EEH support to the IBM FlashSystem 70/80 device driver block: IBM RamSan 70/80 error message bug fix. block: IBM RamSan 70/80 branding changes. ...
-
由 Paul Walmsley 提交于
This reverts commit 6aa97070. Commit 6aa97070 ("lockdep: check that no locks held at freeze time") causes problems with NFS root filesystems. The failures were noticed on OMAP2 and 3 boards during kernel init: [ BUG: swapper/0/1 still has locks held! ] 3.9.0-rc3-00344-ga937536b #1 Not tainted ------------------------------------- 1 lock held by swapper/0/1: #0: (&type->s_umount_key#13/1){+.+.+.}, at: [<c011e84c>] sget+0x248/0x574 stack backtrace: rpc_wait_bit_killable __wait_on_bit out_of_line_wait_on_bit __rpc_execute rpc_run_task rpc_call_sync nfs_proc_get_root nfs_get_root nfs_fs_mount_common nfs_try_mount nfs_fs_mount mount_fs vfs_kern_mount do_mount sys_mount do_mount_root mount_root prepare_namespace kernel_init_freeable kernel_init Although the rootfs mounts, the system is unstable. Here's a transcript from a PM test: http://www.pwsan.com/omap/testlogs/test_v3.9-rc3/20130317194234/pm/37xxevm/37xxevm_log.txt Here's what the test log should look like: http://www.pwsan.com/omap/testlogs/test_v3.8/20130218214403/pm/37xxevm/37xxevm_log.txt Mailing list discussion is here: http://lkml.org/lkml/2013/3/4/221 Deal with this for v3.9 by reverting the problem commit, until folks can figure out the right long-term course of action. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Jeff Layton <jlayton@redhat.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <maciej.rutecki@gmail.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ben Chan <benchan@chromium.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 3月, 2013 6 次提交
-
-
由 Daniel Borkmann 提交于
Lost in space for a long time, but it finally came back to us from some ancient code tombs. This patch adds a minimal runnable example of Linux' packet mmap(2) from Chetan Loke's TPACKET_V3. Special thanks to David S. Miller, and also Eric Leblond and Victor Julien! Cc: Eric Leblond <eric@regit.org> Cc: Victor Julien <victor@inliniac.net> Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Make sure we use proper API to fetch dev->rx_handler_data, instead of ugly casts. Rename macvlan_port_get() to macvlan_port_get_rtnl() to document fact that we hold RTNL when needed, with lockdep support. This removes sparse warnings as well (CONFIG_SPARSE_RCU_POINTER=y) CHECK drivers/net/macvlan.c drivers/net/macvlan.c:706:37: warning: cast removes address space of expression drivers/net/macvlan.c:775:16: warning: cast removes address space of expression drivers/net/macvlan.c:924:16: warning: cast removes address space of expression Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As time passed, some fields were added in net_device, and not at sensible offsets. Lets reorder some fields to reduce number of cache lines in RX path. Fields not used in data path should be moved out of this critical cache line. In particular, move broadcast[] to the end of the rx section, as it is less used, and ethernet uses only the beginning of the 32bytes field. Before patch : offsetof(struct net_device,dev_addr)=0x258 offsetof(struct net_device,rx_handler)=0x2b8 offsetof(struct net_device,ingress_queue)=0x2c8 offsetof(struct net_device,broadcast)=0x278 After : offsetof(struct net_device,dev_addr)=0x280 offsetof(struct net_device,rx_handler)=0x298 offsetof(struct net_device,ingress_queue)=0x2a8 offsetof(struct net_device,broadcast)=0x2b0 Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Devendra Naga 提交于
return -ENOMEM instead if kzalloc of cdc_ncm_ctx structure is failed. and also remove the comparision of ctx structure with NULL and make it as !ctx. Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antonio Quartulli 提交于
iflink is currently set to 0 in __gre_tunnel_init(). This function is invoked in gre_tap_init() and ipgre_tunnel_init() which are both used to initialise the ndo_init field of the respective net_device_ops structs (ipgre.. and gre_tap..) used by GRE interfaces. However, in netdevice_register() iflink is first set to -1, then ndo_init is invoked and then iflink is assigned to a proper value if and only if it still was -1. Assigning 0 to iflink in ndo_init is therefore first preventing netdev_register() to correctly assign it a proper value and then breaking iflink at all since 0 has not correct meaning. Fix this by removing the iflink assignment in __gre_tunnel_init(). Introduced by c5441932 ("GRE: Refactor GRE tunneling code.") Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAntonio Quartulli <ordex@autistici.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "This includes the bug-fix for a >= v3.8-rc1 regression specific to iscsi-target persistent reservation conflict handling (CC'ed to stable), and a tcm_vhost patch to drop VIRTIO_RING_F_EVENT_IDX usage so that in-flight qemu vhost-scsi-pci device code can detect the proper vhost feature bits. Also, there are two more tcm_vhost patches still being discussed by MST and Asias for v3.9 that will be required for the in-flight qemu vhost-scsi-pci device patch to function properly, and that should (hopefully) be the last target fixes for this round." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix RESERVATION_CONFLICT status regression for iscsi-target special case tcm_vhost: Avoid VIRTIO_RING_F_EVENT_IDX feature bit
-
- 30 3月, 2013 13 次提交
-
-
由 Chen Gang 提交于
for make V=1 EXTRA_CFLAGS=-W ARCH=arm allmodconfig printk is need when CONFIG_BPF_JIT is defined or it will report pr_err and print_hex_dump are implicit declaration Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Shevchenko 提交于
On some hardware configurations we have got the request line with the offset. The patch introduces convert_slave_id() helper for that cases. The request line base is came from the driver data provided by the platform_device_id table. Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Arnd Bergmann 提交于
As reported by Wu Fengguang's build robot tracking sparse warnings, the dma_spec arguments in the dw_dma_xlate are already byte swapped on little-endian platforms and must not get swapped again. This code is currently not used anywhere, but will be used in Linux 3.10 when the ARM SPEAr platform starts using the generic DMA DT binding. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Reported-by: NFengguang Wu <fengguang.wu@intel.com> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NVinod Koul <vinod.koul@intel.com>
-
由 Rafael J. Wysocki 提交于
The Adam Belay's e-mail address in MAINTAINERS under PNP SUPPORT is not valid any more and I started to maintain that code in the meantime as a matter of fact, so list myself as a maintainer of it along with Bjorn and remove the Adam's entry from it. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rajesh Borundia 提交于
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o VFs might get scheduled out after sending a command to a PF and scheduled in after receiving a response. Implement a worker thread to handle atomic commands. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Add support for commands from VF to PF. o PF validates the commands sent by the VF before sending it to adapter. o vPort is a container of resources. PF creates vPort for VFs and attach resources to it. vPort is transparent to the VF. o Separate 83xx TX and RX hardware resource cleanup from 82xx. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Adapter provides communication channel between VF and PF. Any control commands from the VF driver are sent to the PF driver through this communication channel. PF driver validates the commands before sending them to the adapter. Similarly PF driver forwards any control command responses to the VF driver through this communication channel. Adapter sends message pending event to VF or PF when there is an outstanding response or a command for VF or PF respectively. When a command or a response is sent over a channel VF or PF cannot send another command or a response until adapter sends a channel free event. Adapter allocates 1K area to VF and PF each for this communication. o Commands and responses are encapsulated in a header. Header determines sequence id, number of fragments, fragment number etc. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o VF will use shared MSI-X interrupt vector for Tx and Rx. o When QLCNIC_INTR_SHARED flag is set Tx and Rx will share MSI-X interrupt vector. Tx will use a separate MSI-X interrupt vector from Rx otherwise. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Add PCI device entry for VF. o Add HW operations for VF. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Add QLCNIC_SRIOV to Kconfig. o Provide PCI sysfs hooks to enable and disable SR-IOV. o Allow enabling only when CONFIG_QLCNIC_SRIOV is defined. o qlcnic_sriov_pf.c has all the PF related SR-IOV functionality. o qlcnic_sriov_common.c has VF functionality and SR-IOV functionality which is common between VF and PF. o qlcnic_sriov.h is a common header file for SR-IOV defines. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
According to the Datasheet (page 52): 15-12 Reserved 11-0 RXBC Receive Byte Count This field indicates the present received frame byte size. The code has a bug: rxh = ks8851_rdreg32(ks, KS_RXFHSR); rxstat = rxh & 0xffff; rxlen = rxh >> 16; // BUG!!! 0xFFF mask should be applied Signed-off-by: NMax Nekludov <Max.Nekludov@us.elster.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Bolle 提交于
The CONFIG_ARCH_IXDP2X01 and CONFIG_MACH_IXDP2351 Kconfig macros are unused since the ixp23xx and ixp2000 platforms were removed in v3.5. So remove the last code still depending on these macros. And since CS89x0_NONISA_IRQ was only set if either of these two macros was defined we can also remove that macro and the code depending on it. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-