Fix NULL-pointer dereference at release by moving port data allocation
and deallocation to port_probe and port_remove.

Fix NULL-pointer dereference at disconnect by stopping port urbs at
port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer accessible at
disconnect or release.

Note that this patch also fixes port and interface-data memory leaks in
the error path of attach should port initialisation fail for any port.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure generic close is called at close.

The driver relies on the generic write implementation but did not call
generic close.

Note that the call to kill the read urb is not redundant, as mct_u232
uses an interrupt urb from the second port as the read urb and that
generic close therefore fails to kill it.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the write waitqueue was initialised but never used.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix memory leak in write error path.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure to allocate the control-message buffer dynamically as some
platforms cannot do DMA from stack.

Note that only the first byte of the old buffer was used.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure no control urb is submitted during close after a disconnect by
checking the disconnected flag.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Kill urbs unconditionally at close and disconnect.

Note that URB status is not valid outside of completion handler.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that this also fixes memory leaks in the error path of attach where
the write urbs were not freed on errors.

Make sure all interface-data deallocation is done in release by moving
the read urb deallocation from disconnect.

Note that the write urb is killed during close so that the call in
disconnect was superfluous.

Compile-only tested.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix memory leak in attach error path where the read urb was never freed.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by replacing attach and release with
port_probe and port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that this patch also fixes a second port-data memory leak in the
error path of attach, should parallel-port initialisation fail.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the oob port is never registered as a port device and should
thus be handled in attach and release.

Compile-only tested.

Cc: Peter Berger <pberger@brimson.com>
Cc: Al Borchers <alborchers@steinerpoint.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by moving port data allocation to port_probe
and actually implementing deallocation.

Note that this driver has never even bothered to try to deallocate it's
port data...

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the fifth port (command port) is never registered as a
port device and thus should be handled in attach and release.

Compile-only tested.

Cc: <support@connecttech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure command buffer is deallocated in case of errors during attach.

Cc: <support@connecttech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make sure no control urb is submitted during close after a disconnect by
checking the disconnected flag.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix port-data memory leak by moving port data allocation and
deallocation to port_probe and port_remove.

Since commit 0998d063 (device-core: Ensure drvdata = NULL when no
driver is bound) the port private data is no longer freed at release as
it is no longer accessible.

Note that the call to metrousb_clean (close) in shutdown was redundant.

Compile-only tested.

Cc: <stable@vger.kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit sets removable subclass for Casio EX-N1 digital camera.

The patch has been tested within an ALT Linux kernel:
http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7

See also https://bugzilla.kernel.org/show_bug.cgi?id=49221Signed-off-by: NOleksandr Chumachenko <ledest@gmail.com>
Signed-off-by: NMichael Shigorin <mike@osdn.org.ua>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

I found a memory leak in sierra_release() (well sierra_probe() I guess)
that looses 8 bytes each time the driver releases a device.
Signed-off-by: NLen Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: NJohan Hovold <jhovold@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

flush_work_sync and flush_work are now the same and flush_work_sync
has been deprecated. This fixes the following warning:

drivers/usb/core/hub.c: In function hub_quiesce:
drivers/usb/core/hub.c:1216:3: warning: flush_work_sync is deprecated (declared at include/linux/workqueue.h:448) [-Wdeprecated-declarations]
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

ezusb: module license 'unspecified' taints kernel
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'for-usb-linus-2012-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus

xHCI fixes for 3.7-rc3

Hi Greg,

Here's four bug fixes for 3.7.

The first patch fixes a potential deadlock in the USB port power off code,
and the last two patches fix bugs in the USB 3.0 Link PM patchset.  The
second one is trivial and removes an unnecessary cast.

Sarah Sharp

Merge tag 'fixes-for-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

usb: fixes for v3.7-rc3

Here's a new set of fixes for v3.7-rc3. It's quite small, only
four patches.

There's one bug fix for the newly added musb-dsps glue layer where
we could be overflowing a buffer when creating the instance name.

NET2272 got a fix for a case where the lock would be left held
when exiting the IRQ handler with error in case of Spurious IRQs.

Renensas USBHS got a DMA stall fix which would cause transfers to
stall forever and a NULL pointer deref fix in case of pipe detach.

xhci_service_interval_to_ns() returns long long
to avoid an overflow. However, the type cast happens
too late. The fix is to force ULL from the beginning.

This patch should be backported to kernels as old as 3.5, that contain
the commit e3567d2c "xhci: Add Intel
U1/U2 timeout policy."
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
CC: stable@vger.kernel.org

An le16 is accessed without conversion.

This patch should be backported to kernels as old as 3.5, that contain
the commit e3567d2c "xhci: Add Intel
U1/U2 timeout policy."
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
CC: stable@vger.kernel.org

renesas_usbhs driver can switch DMA/PIO transfer by using handler,
and each handler have push/pop direction.
But unfortunately, current dma push handler didn't a path
which calls usbhs_pipe_enable(). Thus, dma transfer never happened.
this patch fixes it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

If renesas_usbhs or DMAEngine interrupt didn't happen by a certain cause,
urb->ep will be NULL by usb time out.
Then, host mode will access to it and crash kernel.
This patch fixes it.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Add the missing unlock on the error handle path in function
net2272_irq().
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

The res_name is used for the name construction of a DT property as
follows:

  sprintf(res_name, "port%d-mode", id);

Hence, res_name must be at least 11 characters long in order to store
the name including the terminating '\0'.

While at it, use to snprintf() rather than sprintf() when accessing this
buffer.
Reported-by: NDavid Binderman <dcb314@hotmail.com>
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Struct usb_hub_descriptor.ss.DeviceRemovable has been defined as __le16
and (__force__ __u16) doesn't need.
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>

usb/xhci: release xhci->lock during turning on/off usb port's acpi power resource and checking the existence of port's power resource

When setting usb port's acpi power resource, there will be some xhci hub requests.
This will cause dead lock since xhci->lock has been held before setting acpi power
resource in the xhci_hub_control(). The usb_acpi_power_manageable() function might
fall into sleep so release xhci->lock before invoking it.
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>

There is a race condition in the USB hub code with regard to handling
TT clear requests that can get the HCD driver in a deadlock. Usually
when an TT clear request is scheduled it will be executed immediately:

<7>[    6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[    6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[    6.078299] hub_tt_work:731
<7>[    9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us]
<7>[    9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule
<7>[    9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us]
<7>[    9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us]
<7>[   10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us]
<3>[   10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82
<7>[   10.116537] hub_tt_work:731

However, if a suspend operation is triggered before hub_tt_work is
scheduled, hub_quiesce will cancel the work without notifying the HCD
driver:

<3>[   35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80
<5>[   35.034022] sd 0:0:0:0: [sda] Stopping disk
<7>[   35.034039] hub 2-1:1.0: hub_suspend
<7>[   35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us]
<7>[   35.035085] hub 1-0:1.0: hub_suspend
<7>[   35.035102] usb usb1: bus suspend, wakeup 0
<7>[   35.035106] ehci_hcd 0000:00:1a.0: suspend root hub
<7>[   35.035298] hub 2-0:1.0: hub_suspend
<7>[   35.035313] usb usb2: bus suspend, wakeup 0
<7>[   35.035315] ehci_hcd 0000:00:1d.0: suspend root hub
<6>[   35.250017] PM: suspend of devices complete after 216.979 msecs
<6>[   35.250822] PM: late suspend of devices complete after 0.799 msecs
<7>[   35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1
<7>[   35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot
<7>[   35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1
<7>[   35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot
<6>[   35.274254] PM: noirq suspend of devices complete after 23.442 msecs
<6>[   35.274975] ACPI: Preparing to enter system sleep state S3
<6>[   35.292666] PM: Saving platform NVS memory
<7>[   35.295030] Disabling non-boot CPUs ...
<6>[   35.297351] CPU 1 is now offline
<6>[   35.300345] CPU 2 is now offline
<6>[   35.303929] CPU 3 is now offline
<7>[   35.303931] lockdep: fixing up alternatives.
<6>[   35.304825] Extended CMOS year: 2000

When the device will resume the EHCI driver will get stuck in
ehci_endpoint_disable waiting for the tt_clearing flag to reset:

<0>[   47.610967] usb 2-1.3: **** DPM device timeout ****
<7>[   47.610972]  f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0
<7>[   47.610983]  15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30
<7>[   47.610993]  c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001
<7>[   47.611004] Call Trace:
<7>[   47.611006]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611019]  [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0
<7>[   47.611026]  [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50
<7>[   47.611034]  [<c17592d3>] ? schedule_timeout+0x133/0x290
<7>[   47.611044]  [<c175b43e>] schedule+0x1e/0x50
<7>[   47.611051]  [<c17592d8>] schedule_timeout+0x138/0x290
<7>[   47.611057]  [<c10624a5>] ? sched_clock_cpu+0xf5/0x160
<7>[   47.611063]  [<c103e560>] ? usleep_range+0x40/0x40
<7>[   47.611070]  [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20
<7>[   47.611077]  [<c14935f4>] ehci_endpoint_disable+0x64/0x160
<7>[   47.611084]  [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0
<7>[   47.611092]  [<c1165663>] ? sysfs_add_file+0x13/0x20
<7>[   47.611100]  [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40
<7>[   47.611107]  [<c147fafc>] usb_disable_endpoint+0x5c/0x80
<7>[   47.611111]  [<c147fb57>] usb_disable_interface+0x37/0x50
<7>[   47.611116]  [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640
<7>[   47.611122]  [<c1474665>] ? hub_port_status+0xb5/0x100
<7>[   47.611129]  [<c147a975>] usb_port_resume+0xd5/0x220
<7>[   47.611136]  [<c148877f>] generic_resume+0xf/0x30
<7>[   47.611142]  [<c14821a3>] usb_resume+0x133/0x180
<7>[   47.611147]  [<c1473b10>] ? usb_dev_thaw+0x10/0x10
<7>[   47.611152]  [<c1473b1d>] usb_dev_resume+0xd/0x10
<7>[   47.611157]  [<c13baa60>] dpm_run_callback+0x40/0xb0
<7>[   47.611164]  [<c13bdb03>] ? pm_runtime_enable+0x43/0x70
<7>[   47.611171]  [<c13bafc6>] device_resume+0x1a6/0x2c0
<7>[   47.611177]  [<c13ba940>] ? dpm_show_time+0xe0/0xe0
<7>[   47.611183]  [<c13bb0f9>] async_resume+0x19/0x40
<7>[   47.611189]  [<c10580c4>] async_run_entry_fn+0x64/0x160
<7>[   47.611196]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611203]  [<c104a24c>] ? process_one_work+0x10c/0x480
<7>[   47.611209]  [<c104a2c0>] process_one_work+0x180/0x480
<7>[   47.611215]  [<c104a244>] ? process_one_work+0x104/0x480
<7>[   47.611220]  [<c1058060>] ? async_schedule+0x10/0x10
<7>[   47.611226]  [<c104c15c>] worker_thread+0x11c/0x2f0
<7>[   47.611233]  [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0
<7>[   47.611239]  [<c10507f8>] kthread+0x78/0x80
<7>[   47.611244]  [<c1750000>] ? timer_cpu_notify+0xd6/0x20d
<7>[   47.611253]  [<c1050780>] ? __init_kthread_worker+0x60/0x60
<7>[   47.611258]  [<c176357e>] kernel_thread_helper+0x6/0xd
<7>[   47.611283] ------------[ cut here ]------------

This patch changes hub_quiesce behavior to flush the TT clear work
instead of canceling it, to make sure that no TT clear request remains
uncompleted before suspend.
Signed-off-by: NOctavian Purdila <octavian.purdila@intel.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull arm64 fixes from Catalin Marinas:
 "Main changes:
   - AArch64 Linux compilation fixes following 3.7-rc1 changes
     (MODULES_USE_ELF_RELA, update_vsyscall() prototype)
   - Unnecessary register setting in start_thread() (thanks to Al Viro)
   - ptrace fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
  arm64: fix alignment padding in assembly code
  arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints
  arm64: ptrace: make structure padding explicit for debug registers
  arm64: No need to set the x0-x2 registers in start_thread()
  arm64: Ignore memory blocks below PHYS_OFFSET
  arm64: Fix the update_vsyscall() prototype
  arm64: Select MODULES_USE_ELF_RELA
  arm64: Remove duplicate inclusion of mmu_context.h in smp.c

An interesting effect of using the generic version of linkage.h
is that the padding is defined in terms of x86 NOPs, which can have
even more interesting effects when the assembly code looks like this:

ENTRY(func1)
	mov	x0, xzr
ENDPROC(func1)
	// fall through
ENTRY(func2)
	mov	x0, #1
	ret
ENDPROC(func2)

Admittedly, the code is not very nice. But having code from another
architecture doesn't look completely sane either.

The fix is to add arm64's version of linkage.h, which causes the insertion
of proper AArch64 NOPs.
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The min/max call needed to have explicit types on some architectures
(e.g. mn10300). Use clamp_t instead to avoid the warning:

  kernel/sys.c: In function 'override_release':
  kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default]
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull perf fixes from Ingo Molnar:
 "Assorted small fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf python: Properly link with libtraceevent
  perf hists browser: Add back callchain folding symbol
  perf tools: Fix build on sparc.
  perf python: Link with libtraceevent
  perf python: Initialize 'page_size' variable
  tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter
  lib tools traceevent: Add back pevent assignment in __pevent_parse_format()
  perf hists browser: Fix off-by-two bug on the first column
  perf tools: Remove warnings on JIT samples for srcline sort key
  perf tools: Fix segfault when using srcline sort key
  perf: Require exclude_guest to use PEBS - kernel side enforcement
  perf tool: Precise mode requires exclude_guest

Namhyung Kim reported that the build fails with:

  GEN python/perf.so
  gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory
  error: command 'gcc' failed with exit status 1
  cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory
  make: *** [python/perf.so] Error 1

We need to propagate the TE_PATH variable to the setup.py file.
Reported-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org
[ Fixed superfluous variable build error. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

* The python binding needs to link with libtraceevent and to initialize
  the 'page_size' variable so that mmaping works again.

* The callchain folding character that appears on the TUI just before
  the overhead had disappeared due to recent changes, add it back.

* Intel PEBS in VT-x context uses the DS address as a guest linear address,
  even though its programmed by the host as a host linear address. This either
  results in guest memory corruption and or the hardware faulting and 'crashing'
  the virtual machine.  Therefore we have to disable PEBS on VT-x enter and
  re-enable on VT-x exit, enforcing a strict exclude_guest.

  Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern.

* Fix build on sparc due to UAPI, fix from David Miller.

* Fixes for the srclike sort key for unresolved symbols and when processing
  samples in JITted code, where we don't have an ELF file, just an special
  symbol table, fixes from Namhyung Kim.

* Fix some leaks in libtraceevent, from Steven Rostedt.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Pull ARM soc fixes from Olof Johansson:
 "A set of fixes and some minor cleanups for -rc2:

   - A series from Arnd that fixes warnings in drivers and other code
     included by ARM defconfigs.  Most have been acked by corresponding
     maintainers (and seem quite hard to argue not picking up anyway in
     the few exception cases).
   - A few misc patches from the list for integrator/vt8500/i.MX
   - A batch of fixes to OMAP platforms, fixing:
     - boot problems on beaglebone,
     - regression fixes for local timers
     - clockdomain locking fixes
     - a few boot/sparse warnings
   - For Tegra:
     - Clock rate calculation overflow fix
     - Revert a change that removed timer clocks and a fix for symbol
       name clashes
   - For Renesas:
     - IO accessor / annotation cleanups to remove warnings
   - For Kirkwood/Dove/mvebu:
     - Fixes for device trees for Dove (some minor cleanups, some fixes)
     - Fixes for the mvebu gpio driver
     - Fix build problem for Feroceon due to missing ifdefs
     - Fix lsxl DTS files"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
  ARM: kirkwood: fix buttons on lsxl boards
  ARM: kirkwood: fix LEDs names for lsxl boards
  ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
  gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type
  ARM: dove: Add crypto engine to DT
  ARM: dove: Remove watchdog from DT
  ARM: dove: Restructure SoC device tree descriptor
  ARM: dove: Fix clock names of sata and gbe
  ARM: dove: Fix tauros2 device tree init
  ARM: dove: Add pcie clock support
  ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory
  ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable
  ARM: s3c: mark s3c2440_clk_add as __init_refok
  spi/s3c64xx: use correct dma_transfer_direction type
  ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message
  ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck
  ARM: OMAP: resolve sparse warning concerning debug_card_init()
  ARM: OMAP4: Fix twd_local_timer_register regression
  ARM: tegra: add tegra_timer clock
  ARM: tegra: rename tegra system timer
  ...