Needed for occlusion queries on rv530 chips.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This adds the relocation necessary for OQ support on the r100/r200
chipsets.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The drm sysfs class suspend / resume methods could not distinguish
between different device types wich could lead to illegal type casts.

Use struct device_type and make sure the class suspend / resume callbacks
are aware of those. There is no per device-type suspend / resume. Only
new-style PM.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The previous patch assumes the ioctl already existed, when
it actually didn't.

It also didn't return the correct error code.
Signed-off-by: NDave Airlie <airlied@redhat.com>

If userspace destroys a framebuffer that is in use on a crtc,
don't just null it out, tear down the crtc properly so the
hw gets turned off.
Signed-off-by: NDave Airlie <airlied@redhat.com>

The fallback case wasn't getting executed properly if there
was no TV table, which my T42 M7 hasn't got.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This gets rid of some ugliness, we shuold probably find a way
for the GPU to zero this.
Signed-off-by: NDave Airlie <airlied@redhat.com>

LVDS always requests RMX_FULL, we need to fix it so that doesn't happen
before we can enable LVDS on crtc 1.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This implements the busy ioctl along with a current domain check.
returns 0 or -EBUSY
puts the current domain no matter what the answer.
Signed-off-by: NDave Airlie <airlied@redhat.com>

We really don't want to be doing all these indirects, updating
the GPU gart table is something we do often so the less overhead the
better.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixes 3D apps timing out in the WAIT_VBLANK ioctl.

AVIVO bits compile-tested only.
Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

These are needed for Occulsion Query support.
Signed-off-by: NDave Airlie <airlied@redhat.com>

this syncs the versioning check with the code the X server uses.
Reported-by: NAnssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NDave Airlie <airlied@redhat.com>

rs690 is r3xx 3D engine with AVIVO modesetting so we need to allow
AVIVO register for vline synchronization. This add a specific table
to rs690 to handle that. Thanks to Marc (marvin24) for debugging
this and kudos to Andre (taiu1) for spotting the origin of the bugs.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

these errors are pretty pointless
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some applications/hardware combinations are triggering the message "failed to
acquire vblank counter" to be issued up to 20 times a second, which makes it
both useless and dangerous, as this may hide other important messages.
This changes makes it only appear when people are debugging.
Signed-off-by: NPaul Rolland <rol@as2917.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Lost-twice-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The code which takes probed modes and adds them to a connector eliminates
duplicate modes by comparing them using drm_mode_equal. That function
doesn't consider the type bits, which means that any modes which differ only
in the type field will be lost.

One of the bits in the mode->type field is the DRM_MODE_TYPE_PREFERRED bit.
If the mode with that bit is lost, then higher level code will not know
which mode to select, causing a random mode to be used instead.

This patch simply merges the two mode type bits together; that seems
reasonable to me, but perhaps only a subset of the bits should be used? None
of these can be user defined as they all come from looking at just the
hardware.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

we should align the GTT after VRAM no matter what, as we can
come back from resume and put in a different place and bad things happen.
Signed-off-by: NDave Airlie <airlied@redhat.com>

GTT object can either be cached,uncached or wc just let core ttm
pick the best mode according to how the bo driver and GTT memory
type was initialized.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

dev_priv->saveSWF1 is a 16 element array, but this reads up to index 22,
and restored values from the wrong registers.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NEric Anholt <eric@anholt.net>

These are new AMD IGP chips
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Check whether index is within bounds before grabbing the element.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Check whether index is within bounds before grabbing the element.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If there are multiple simultaneous waiters for the same buffer object,
a temporary reference to its sync object may be leaked.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch fixes following kmemleak report:
unreferenced object 0xffff88022cb53000 (size 4096):
  comm "work_for_cpu", pid 97, jiffies 4294672345
  backtrace:
    [<ffffffff810eb222>] create_object+0x19f/0x2a0
    [<ffffffff810eb422>] kmemleak_alloc+0x26/0x4c
    [<ffffffff810e363f>] __kmalloc+0x187/0x1b0
    [<ffffffffa005f3db>] kzalloc.clone.0+0x13/0x15 [radeon]
    [<ffffffffa005f403>] radeon_driver_load_kms+0x26/0xe1 [radeon]
    [<ffffffffa0017432>] drm_get_dev+0x37f/0x480 [drm]
    [<ffffffffa007f424>] radeon_pci_probe+0x15/0x269 [radeon]
    [<ffffffff811f8779>] local_pci_probe+0x17/0x1b
    [<ffffffff8105ffbb>] do_work_for_cpu+0x18/0x2a
    [<ffffffff81063c38>] kthread+0x8a/0x92
    [<ffffffff81012cba>] child_rip+0xa/0x20
    [<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: NXiaotian Feng <dfeng@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The ordering was wrong to get the nomodeset parameter to work.
Signed-off-by: NDave Airlie <airlied@redhat.com>

On some architectures the comparison may cause a compilation failure.

Original partial fix Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NPekka Paalanen <pq@iki.fi>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This got missed in the VRAM init re-workings.
Signed-of-by: NDave Airlie <airlied@redhat.com>

This was caught by Weiss. Also added some comments to the
fb_changed and mode_changed variables to explain what they do.
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Tested-by: NThomas White <taw@bitwiz.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Match the logic to the comments in the debug message
Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This corresponds to a fix to UMS back in 2007.  Fixes fd.o bug #20115.
Signed-off-by: NMa Ling <ling.ma@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

The patch fixed a bug on MP965-D.  When VGA is connected to a DVI-I connector,
it incorrectly shows sdvo dvi as connected.
Signed-off-by: NMa Ling <ling.ma@intel.com>
[anholt: hand-resolved against previous commit and fixed up commit message]
Signed-off-by: NEric Anholt <eric@anholt.net>

Baed on Eric's idea in order to handle multiple sdvo encoders
we implement another approach to dynamically chose real one
encoder after detection, which is contrasted with patch -
drm/i915:Construct all possible sdvo outputs for sdvo encoder.
Signed-off-by: NMa Ling <ling.ma@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

In order to get best possible quality image we chose 640x480 for
NTSC, PAL and 480p, 1280x720 for 720p, 1920x1080 for 1080i/p
TV format respectively.
Signed-off-by: NMa Ling <ling.ma@intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

I had one report of flicker due to FIFO underruns on 845G.  Scott was
kind enough to test a few patches and report success with this one.
Looks like 845G measures FIFO size slightly differently than other
chips, and we were also clobbering the FIFO burst length.  Fixing both
of those issues gives him a healthy machine again.

Note that we still only adjust plane A's watermark in the 830/845
case.  If someone is willing to test we could support a bigger variety
of dual-head 830/845 configurations with a bit more code.

Fixes fdo bug #19304 (again).
Reported-by: NScott Hansen <scottandchrystie@comcast.net>
Tested-by: NScott Hansen <scottandchrystie@comcast.net>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

Check FORCE_DETECT bit to be clear for the finish
of hotplug detect process. Also check possible mono
monitor which should also be marked as connected.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This adds embedded DisplayPort support on next mobile chip which
aims to replace origin LVDS port. VBT's driver feature block has
been used to determine the type of current internal panel for eDP
or LVDS.

Currently no panel fitting support for eDP and backlight control
would be added in future.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

We should use current channel 'status' bits to clear DP aux channel's
done and error bits, instead of using the channel setting bits, that
will set send/busy bit again to initiate new transaction.

This also includes also some minor cleanup.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>