1. 07 10月, 2009 1 次提交
  2. 05 10月, 2009 1 次提交
    • N
      af_packet: add interframe drop cmsg (v6) · 97775007
      Neil Horman 提交于
      Add Ancilliary data to better represent loss information
      
      I've had a few requests recently to provide more detail regarding frame loss
      during an AF_PACKET packet capture session.  Specifically the requestors want to
      see where in a packet sequence frames were lost, i.e. they want to see that 40
      frames were lost between frames 302 and 303 in a packet capture file.  In order
      to do this we need:
      
      1) The kernel to export this data to user space
      2) The applications to make use of it
      
      This patch addresses item (1).  It does this by doing the following:
      
      A) Anytime we drop a frame for which we would increment po->stats.tp_drops, we
      also no increment a stats called po->stats.tp_gap.
      
      B) Every time we successfully enqueue a frame to sk_receive_queue, we record the
      value of po->stats.tp_gap in skb->mark.  skb->cb would nominally be the place to
      record this, but since all the space there is used up, we're overloading
      skb->mark.  Its safe to do since any enqueued packet is guaranteed to be
      unshared at this point, and skb->mark isn't used for anything else in the rx
      path to the application.  After we record tp_gap in the skb, we zero
      po->stats.tp_gap.  This allows us to keep a counter of the number of frames lost
      between any two enqueued packets
      
      C) When the application goes to dequeue a frame from the packet socket, we look
      at skb->mark for that frame.  If it is non-zero, we add a cmsg chunk to the
      msghdr of level SOL_PACKET and type PACKET_GAPDATA.  Its a 32 bit integer that
      represents the number of frames lost between this packet and the last previous
      frame received.
      
      Note there is a chance that if there is frame loss after a receive, and then the
      socket is closed, some gap data might be lost.  This is covered by the use of
      the PACKET_AUXDATA socket option, which gives total loss data.  With a bit of
      math, the final gap can be determined that way.
      
      I've tested this patch myself, and it works well.
      Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
      
       include/linux/if_packet.h |    2 ++
       net/packet/af_packet.c    |   33 +++++++++++++++++++++++++++++++++
       2 files changed, 35 insertions(+)
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      97775007
  3. 01 10月, 2009 1 次提交
  4. 28 9月, 2009 1 次提交
  5. 24 7月, 2009 1 次提交
  6. 18 6月, 2009 1 次提交
  7. 03 6月, 2009 1 次提交
  8. 30 5月, 2009 1 次提交
    • J
      net: convert unicast addr list · ccffad25
      Jiri Pirko 提交于
      This patch converts unicast address list to standard list_head using
      previously introduced struct netdev_hw_addr. It also relaxes the
      locking. Original spinlock (still used for multicast addresses) is not
      needed and is no longer used for a protection of this list. All
      reading and writing takes place under rtnl (with no changes).
      
      I also removed a possibility to specify the length of the address
      while adding or deleting unicast address. It's always dev->addr_len.
      
      The convertion touched especially e1000 and ixgbe codes when the
      change is not so trivial.
      Signed-off-by: NJiri Pirko <jpirko@redhat.com>
      
       drivers/net/bnx2.c               |   13 +--
       drivers/net/e1000/e1000_main.c   |   24 +++--
       drivers/net/ixgbe/ixgbe_common.c |   14 ++--
       drivers/net/ixgbe/ixgbe_common.h |    4 +-
       drivers/net/ixgbe/ixgbe_main.c   |    6 +-
       drivers/net/ixgbe/ixgbe_type.h   |    4 +-
       drivers/net/macvlan.c            |   11 +-
       drivers/net/mv643xx_eth.c        |   11 +-
       drivers/net/niu.c                |    7 +-
       drivers/net/virtio_net.c         |    7 +-
       drivers/s390/net/qeth_l2_main.c  |    6 +-
       drivers/scsi/fcoe/fcoe.c         |   16 ++--
       include/linux/netdevice.h        |   18 ++--
       net/8021q/vlan.c                 |    4 +-
       net/8021q/vlan_dev.c             |   10 +-
       net/core/dev.c                   |  195 +++++++++++++++++++++++++++-----------
       net/dsa/slave.c                  |   10 +-
       net/packet/af_packet.c           |    4 +-
       18 files changed, 227 insertions(+), 137 deletions(-)
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ccffad25
  9. 22 5月, 2009 1 次提交
  10. 19 5月, 2009 1 次提交
  11. 15 4月, 2009 1 次提交
    • E
      packet: avoid warnings when high-order page allocation fails · 719bfeaa
      Eric Dumazet 提交于
      Latest tcpdump/libpcap triggers annoying messages because of high order page
      allocation failures (when lowmem exhausted or fragmented)
      
      These allocation errors are correctly handled so could be silent.
      
      [22660.208901] tcpdump: page allocation failure. order:5, mode:0xc0d0
      [22660.208921] Pid: 13866, comm: tcpdump Not tainted 2.6.30-rc2 #170
      [22660.208936] Call Trace:
      [22660.208950]  [<c04e2b46>] ? printk+0x18/0x1a
      [22660.208965]  [<c02760f7>] __alloc_pages_internal+0x357/0x460
      [22660.208980]  [<c0276251>] __get_free_pages+0x21/0x40
      [22660.208995]  [<c04cc835>] packet_set_ring+0x105/0x3d0
      [22660.209009]  [<c04ccd1d>] packet_setsockopt+0x21d/0x4d0
      [22660.209025]  [<c0270400>] ? filemap_fault+0x0/0x450
      [22660.209040]  [<c0449e34>] sys_setsockopt+0x54/0xa0
      [22660.209053]  [<c044b97f>] sys_socketcall+0xef/0x270
      [22660.209067]  [<c0202e34>] sysenter_do_call+0x12/0x26
      Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      719bfeaa
  12. 14 3月, 2009 1 次提交
  13. 27 2月, 2009 1 次提交
  14. 01 2月, 2009 1 次提交
  15. 31 1月, 2009 1 次提交
  16. 24 11月, 2008 1 次提交
  17. 20 11月, 2008 1 次提交
  18. 26 7月, 2008 1 次提交
  19. 20 7月, 2008 1 次提交
  20. 19 7月, 2008 1 次提交
  21. 15 7月, 2008 3 次提交
  22. 12 6月, 2008 1 次提交
  23. 13 5月, 2008 1 次提交
  24. 26 3月, 2008 2 次提交
  25. 24 3月, 2008 1 次提交
  26. 29 1月, 2008 5 次提交
  27. 13 11月, 2007 1 次提交
  28. 11 11月, 2007 2 次提交
  29. 01 11月, 2007 1 次提交
  30. 19 10月, 2007 1 次提交
  31. 11 10月, 2007 2 次提交