<ajax> i'm getting tempted to just disable temporal
<mjg59> Approved.
<ajax> apparently it makes the screen look pulse-y which is worse
than the disease.

References: http://lists.freedesktop.org/archives/intel-gfx/2011-October/012545.htmlTested-by: NОлег Герман <oleg.german@gmail.com>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

This reverts commit dfadbbdb.

Further upstream discussion between Marek and Thomas decided this wasn't
fully baked and needed further work, so revert it before it hits mainline.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This reverts commit d3ed7402.

Further upstream discussion between Thomas and Marek decided this needed
more work and driver specifics. So revert before it goes upstream.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NJakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

abrt files a lot of bug reports when users get GPU lockups, but there's not really
enough context to do anything useful with them.  Given the lack of GPU context being
dumped, this patch removes the stack trace, so that abrt ignores the messages.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

According to the gen6 docs, only the DP_A port (on-CPU eDP) still uses
the old IBX bit shift for the link training pattern setup bits.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The obvious counterpart to is_pch_edp().  Convert existing instances of
the idiom to the new routine.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

SPD frames are actually type 0x83, not just 0x3.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: NKeith Packard <keithp@keithp.com>

Misc fixes based on tests with an infoframe analyzer:
  - checksum *does* include header bytes
  - DIP enable & AVI infoframe are tied together in hw, so disable both
    and make sure AVI frames are enabled first
  - use every vsync flag for SPD frames to avoid reserved value in
    frequency field when enabling both AVI & SPD

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=40281.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: NKeith Packard <keithp@keithp.com>

DPCD 1.1+ adds some automated test infrastructure support.  Add support
for reading the IRQ source and jumping to a test handling routine if
needed.  Subsequent patches will handle particular tests; this patch
just ACKs any requested tests by default.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Read link status first, followed by the full DPCD receiver cap field
rather than just the first 8 bytes.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

These were just working around the math being wrong.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The previous code was confused about units, which is pretty reasonable
given that the units themselves are confusing.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The commit 47356eb6 introduced a
mechanism to record the backlight level only at disabling time, but it
also introduced a regression.  Since intel_lvds_enable() may be called
without disabling (e.g. intel_lvds_commit() calls it unconditionally),
the backlight gets back to the last recorded value.  For example, this
happens when you dim the backlight, close the lid and open the lid,
then the backlight suddenly goes to the brightest.

This patch fixes the bug by recording the backlight level always
when changed via intel_panel_set_backlight().  And,
intel_panel_{enable|disable}_backlight() call the internal function not
to update the recorded level wrongly.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

With the tracing code in there they are far too big to inline.

.text savings compared to a non force inline kernel:

i915_restore_display                        4393   12036   +7643
i915_save_display                           4295   11459   +7164
i915_handle_error                           2979    6666   +3687
i915_driver_irq_handler                     2923    5086   +2163
i915_ringbuffer_info                         458    1661   +1203
i915_save_vga                                  -    1200   +1200
i915_driver_irq_uninstall                    453    1624   +1171
i915_driver_irq_postinstall                  913    2078   +1165
ironlake_enable_drps                         719    1872   +1153
i915_restore_vga                               -    1142   +1142
intel_display_capture_error_state            784    2030   +1246
intel_init_emon                              719    2016   +1297

and more ...

[AK: these are older numbers, with the new SNB forcewake checks
it will be even worse]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Belongs in PCH enable instead.  The duplication is worrying and the
specs explicitly list transcoder select *after* actual PLL enable, which
doesn't occur until later.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Just some extra debug output.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The watermark reg for the third pipe is in an unusual offset; add
support for it and set watermarks for 3 pipe configs.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

At the point where we check, we can't do much about the failure, but it
can aid debugging.  Note that the auto-train override bit will be reset
as part of normal mode setting with this patch if a pipe ever does get
stuck, but that's consistent with the workaround for CPT provided by the
hardware team.  This patch helped catch the fact that the pipe wasn't
running in the !composite sync FDI case on my IVB SDV, so has already
shown to be useful.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Transcoder A will always use PLL A and transcoder B will use PLL B.  But
transcoder C could use either, so always mask the select bits off before
or'ing in a new value.
Reported-by: NAdam Jackson <ajax@redhat.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The cursor regs have moved around, add the offsets and new macros for
getting at them.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

We can have more than just A and B these days.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Add two new fields to the intel_crtc struct for 3 pipe support: no_pll
and use_pll_a.  The no_pll field is only set on the 3rd pipe to indicate
that it doesn't have a PLL of its own and so shouldn't try to write the
main PLL regs.  The use_pll_a field controls which PLL pipe 3 will
share, A or B.  The core code will try to share PLLs with whichever pipe
has the same timings, rejecting the mode set if none is found.  This
means that pipe 3 must always be set after one of the other pipes has
been configured with real PLL settings.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Add a couple of checks now that we're using the 3rd transcoder:
  1) make sure the transcoder PLL enable bit is set for the transcoder
     in question
  2) when checking actual PLL enable, use the selected PLL number rather
     than the transcoder number (they could be different now)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Required for 3 pipe functionality.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Just a cleanup to make the mode_set function more manageable.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Well almost anyway.  IVB has 3 planes, pipes, transcoders, and FDI
interfaces, but only 2 pipe PLLs.  So two of the pipes must use the same
pipe timings (e.g. 2 DP plus one other, or two HDMI with the same mode
and one other, etc.).
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Add a macro for accessing the two pipe PLLs and add a check to make sure
we don't access a non-existent one in the enable/disable functions.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

It's needed for 3 pipe support as well as just regular functionality
(e.g. DisplayPort).
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

v2 by danvet: Use a new flag to flush the render target cache on gen6+
(hw reuses the old write flush bit), as suggested by Ben Widawsdy.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
[danvet: this seems to fix cairo-perf-trace hangs on my snb]
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

"STALL_AT_SCOREBOARD" is much clearer than "STALL_EN" now that there are
several different kinds of stalls.  Also, "INSTRUCTION_CACHE_INVALIDATE"
is a lot easier to understand at a glance than the terse "IS_FLUSH."
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
[danvet: use INVALIDATE for ro cache flags for more consistency]
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Not all PIPE_CONTROLs have a length of 2, so remove it from the #define
and make each invocation specify the desired length.
Signed-off-by: NKenneth Graunke <kenneth@whitecape.org>
[danvet: implement style suggestion from Ben Widawsdy]
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Idle the GPU before doing any unmaps. We know if VT-d is in use through
an exported variable from iommu code.

This should avoid a known HW issue.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

[Description from: Daniel Vetter]
I've just discussed this quickly with Chris on irc and it's probably
best to just kill the list_empty early bailout. gpu_idle isn't a
fastpath, so who cares. One candidate where we emit commands to the ring
without adding anything onto these lists is e.g. pageflip. There are
probably more.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NKeith Packard <keithp@keithp.com>

We currently only round up the userspace size to the next page. We
assume that userspace hasn't made a mistake and requested a zero-length
gem object and all through our internal code we then presume that every
object is backed by at least a single page. Fix that oversight and
report EINVAL back to userspace if they try to create a zero length
object.

[danvet: This fixes tests/gem_bad_length]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Use the helper function already employed by the pwrite/pread
functions.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Fixes tests/gem_tiled_pread on my snb. I know, mesa doesn't use this
on gen6+, but I also hate failing testcases.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The rps disabling code wasn't properly cancelling outstanding work
items. Also add a comment that explains why we're not racing with
the work item that could unmask interrupts - that piece of code
confused me quite a bit.

v2: Ben Widawsky pointed out that the first patch would deadlock
(and a few lesser problems). All corrected.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NKeith Packard <keithp@keithp.com>