Testing suggests that at least some Lenovos and some Intels will
fail to reboot via EFI, attempting to jump to an unmapped
physical address. In the long run we could handle this by
providing a page table with a 1:1 mapping of physical addresses,
but for now it's probably just easier to assume that ACPI or
legacy methods will be present and reboot via those.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/1309985557-15350-1-git-send-email-mjg@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Some BIOSes will reset the Intel MISC_ENABLE MSR (specifically the
XD_DISABLE bit) when resuming from S3, which can interact poorly with
ebba638a. In 32bit PAE mode, this can
lead to a fault when EFER is restored by the kernel wakeup routines,
due to it setting the NX bit for a CPU that (thanks to the BIOS reset)
now incorrectly thinks it lacks the NX feature. (64bit is not affected
because it uses a common CPU bring-up that specifically handles the
XD_DISABLE bit.)

The need for MISC_ENABLE being restored so early is specific to the S3
resume path. Normally, MISC_ENABLE is saved in save_processor_state(),
but this happens after the resume header is created, so just reproduce
the logic here. (acpi_suspend_lowlevel() creates the header, calls
do_suspend_lowlevel, which calls save_processor_state(), so the saved
processor context isn't available during resume header creation.)

[ hpa: Consider for stable if OK in mainline ]
Signed-off-by: NKees Cook <kees.cook@canonical.com>
Link: http://lkml.kernel.org/r/20110707011034.GA8523@outflux.netSigned-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <stable@kernel.org> 2.6.38+

Since git commit
  660e34ce x86: reorder reboot method
  preferences,
my Acer Aspire One hangs on reboot.  It appears that its ACPI method
for rebooting is broken.  The attached patch adds a quirk so that the
machine will reboot via the BIOS.

[ hpa: verified that the ACPI control on this machine is just plain broken. ]
Signed-off-by: NPeter Chubb <peter.chubb@nicta.com.au>
Link: http://lkml.kernel.org/r/w439iki5vl.wl%25peter@chubb.wattle.id.auSigned-off-by: NH. Peter Anvin <hpa@zytor.com>

During 32/64 NUMA init unification, commit 797390d8 ("x86-32,
NUMA: use sparse_memory_present_with_active_regions()") made
32bit mm init call memory_present() automatically from
active_regions instead of leaving it to each NUMA init path.

This commit description is inaccurate - memory_present() calls
aren't the same for flat and numaq.  After the commit,
memory_present() is only called for the intersection of e820 and
NUMA layout.  Before, on flatmem, memory_present() would be
called from 0 to max_pfn.  After, it would be called only on the
areas that e820 indicates to be populated.

This is how x86_64 works and should be okay as memmap is allowed
to contain holes; however, x86_32 DISCONTIGMEM is missing
early_pfn_valid(), which makes memmap_init_zone() assume that
memmap doesn't contain any hole.  This leads to the following
oops if e820 map contains holes as it often does on machine with
near or more 4GiB of memory by calling pfn_to_page() on a pfn
which isn't mapped to a NUMA node, a reported by Conny Seidel:

  BUG: unable to handle kernel paging request at 000012b0
  IP: [<c1aa13ce>] memmap_init_zone+0x6c/0xf2
  *pdpt =3D 0000000000000000 *pde =3D f000eef3f000ee00
  Oops: 0000 [#1] SMP
  last sysfs file:
  Modules linked in:

  Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00164-g797390d8 #1 To Be Filled By O.E.M. To Be Filled By O.E.M./E350M1
  EIP: 0060:[<c1aa13ce>] EFLAGS: 00010012 CPU: 0
  EIP is at memmap_init_zone+0x6c/0xf2
  EAX: 00000000 EBX: 000a8000 ECX: 000a7fff EDX: f2c00b80
  ESI: 000a8000 EDI: f2c00800 EBP: c19ffe54 ESP: c19ffe34
   DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
  Process swapper (pid: 0, ti=3Dc19fe000 task=3Dc1a07f60 task.ti=3Dc19fe000)
  Stack:
   00000002 00000000 0023f000 00000000 10000000 00000a00 f2c00000 f2c00b58
   c19ffeb0 c1a80f24 000375fe 00000000 f2c00800 00000800 00000100 00000030
   c1abb768 0000003c 00000000 00000000 00000004 00207a02 f2c00800 000375fe
  Call Trace:
   [<c1a80f24>] free_area_init_node+0x358/0x385
   [<c1a81384>] free_area_init_nodes+0x420/0x487
   [<c1a79326>] paging_init+0x114/0x11b
   [<c1a6cb13>] setup_arch+0xb37/0xc0a
   [<c1a69554>] start_kernel+0x76/0x316
   [<c1a690a8>] i386_start_kernel+0xa8/0xb0

This patch fixes the bug by defining early_pfn_valid() to be the
same as pfn_valid() when DISCONTIGMEM.
Reported-bisected-and-tested-by: NConny Seidel <conny.seidel@amd.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: hans.rosenfeld@amd.com
Cc: Christoph Lameter <cl@linux.com>
Cc: Conny Seidel <conny.seidel@amd.com>
Link: http://lkml.kernel.org/r/20110628094107.GB3386@htj.dyndns.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

CE variant requires a different chremap setup.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=35472Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (24 commits)
  usbnet: Remove over-broad module alias from zaurus.
  MAINTAINERS: drop Michael from bfin_mac driver
  net/can: activate bit-timing calculation and netlink based drivers by default
  rionet: fix NULL pointer dereference in rionet_remove
  net+crypto: Use vmalloc for zlib inflate buffers.
  netfilter: Fix ip_route_me_harder triggering ip_rt_bug
  ipv4: Fix IPsec slowpath fragmentation problem
  ipv4: Fix packet size calculation in __ip_append_data
  cxgb3: skb_record_rx_queue now records the queue index relative to the net_device.
  bridge: Only flood unregistered groups to routers
  qlge: Add maintainer.
  MAINTAINERS: mark socketcan-core lists as subscribers-only
  MAINTAINERS: Remove Sven Eckelmann from BATMAN ADVANCED
  r8169: fix wrong register use.
  net/usb/kalmia: signedness bug in kalmia_bind()
  net/usb: kalmia: Various fixes for better support of non-x86 architectures.
  rtl8192cu: Fix missing firmware load
  udp/recvmsg: Clear MSG_TRUNC flag when starting over for a new packet
  ipv6/udp: Use the correct variable to determine non-blocking condition
  netconsole: fix build when CONFIG_NETCONSOLE_DYNAMIC is turned on
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6:
  MAINTAINERS: update AVR32 and AT32AP maintainers

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: update author email for at32ap700x_wdt
  watchdog: gef_wdt: fix MODULE_ALIAS
  watchdog: Intel SCU Watchdog: Fix build and remove duplicate code
  watchdog: mtx1-wdt: fix section mismatch
  watchdog: mtx1-wdt: fix GPIO toggling
  watchdog: mtx1-wdt: request gpio before using it
  watchdog: Handle multiple wm831x watchdogs being registered

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x:
  sh: use printk_ratelimited instead of printk_ratelimit
  sh: Fix up unmet dependency warnings with USB EHCI/OHCI selects.
  sh: fix the value of sh_dmae_slave_config in setup-sh7757
  sh: fix the INTC vector for IRQ and IRL in setup-sh7757
  sh: add to select the new configuration for USB EHCI/OHCI
  sh: add platform_device of EHCI/OHCI to setup-sh7757
  sh: fix compile error using sh7757lcr_defconfig

Merge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x:
  ARM: mach-shmobile: make a struct in board-ap4evb.c static
  ARM: mach-shmobile: ag5evm: consistently name sdhi info structures
  ARM: mach-shmobile: mackerel: change usbhs devices order

This alters the maintenance of the AVR32 architecture and the AT32AP machine
code to be shared between Haavard Skinnemoen and me. The status is also changed
to maintained, as we no longer are being paid to look after this architecture.
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Acked-by: NHaavard Skinnemoen <hskinnemoen@gmail.com>

Follows the powerpc change, for much the same rationale.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

struct soc_camera_link imx074_link in board-ap4evb.c doesn't have
to be global.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: increase rom size for atrm method

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: caam - fix operator precedence in shared descriptor allocation

The vbios rom is >64k on a lot of modern asics.  Increase
the fetch size for atrm to make sure we don't miss part
of a larger rom.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

setkey allocates 16 bytes (CAAM_CMD_SZ *
DESC_AEAD_SHARED_TEXT_LEN) shy of what is needed to
store the shared descriptor, resulting in memory
corruption.  Fix this.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

* 'kvm-updates/3.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86 emulator: fix %rip-relative addressing with immediate source operand

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c/pca954x: Initialize the mux to disconnected state
  i2c-taos-evm: Fix log messages

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  arch/powerpc: use printk_ratelimited instead of printk_ratelimit
  powerpc/rtas-rtc: remove sideeffects of printk_ratelimit
  powerpc/pseries: remove duplicate SCSI_BNX2_ISCSI in pseries_defconfig
  powerpc/e500: fix breakage with fsl_rio_mcheck_exception
  powerpc/p1022ds: fix audio-related properties in the device tree
  powerpc/85xx: fix NAND_CMD_READID read bytes number

It's not so much an error as a warning about normal Marvell crazines.
So don't use KERN_ERR that ends up spamming the console even in quiet
mode, it's not _that_ critical.

Explained by Jeff:

 "Long explanation, it's a mess:

  Marvell took standard AHCI, and bastardized it to include a weird mode
  whereby PATA devices appear inside the AHCI DMA and interrupt
  infrastructure you're familiar with.

  So, PATA devices appear via pata_marvell driver, using basic legacy
  IDE programming interface.  But SATA devices, which might also be
  attached to this chip, either work in under-performing mode or
  simply don't work at all (e.g.  newer 6 Gbps devices or port
  multiplier attachments, NCQ, ...)

  On the other hand, 'ahci' driver loads and works with the chip's
  attached SATA devices quite beautifully, but is completely unable to
  drive any attached PATA devices, due to the Marvell-specific
  PATA-under-AHCI interface.

  The "masking port_map 0x7 -> 0x3" message is the ahci driver "hiding"
  the PATA port(s) from itself, making sure it will only drive the SATA
  ports it knows how to drive."
Acked-by: NJeff Garzik <jgarzik@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This module and a bunch of dependancies are getting loaded on several
of laptops I have (probably picking up the mobile broadband device),
that have nothing to do with zaurus. Matching by class without
any vendor/device pair isn't the right thing to do here, as it
will prevent any other driver from correctly binding to it.
(Or in the absense of a driver, will just waste time & memory by
 unnecessarily loading modules)
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We want people to just use the list now rather than hitting up people
who are no longer responsible for it.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Acked-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The two options "CAN bit-timing calculation" and
"Platform CAN drivers with Netlink support" have a "default Y". In order to
activate them by default, change to "default y".
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NWolfgang Grandegger <wg@grandegger.com>
Acked-by: NKurt Van Dijck <kurt.van.dijck@eia.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function rionet_remove initializes local variable 'ndev' to NULL
and do nothing changes before the call to unregister_netdev(ndev),
this could cause a NULL pointer dereference.
Reported-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NYinglin Luan <synmyth@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They are 64K and result in order-4 allocations, even with SLUB.

Therefore, just like we always have for the deflate buffers, use
vmalloc.
Reported-by: NMartin Jackson <mjackson220.list@gmail.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

	Avoid creating input routes with ip_route_me_harder.
It does not work for locally generated packets. Instead,
restrict sockets to provide valid saddr for output route (or
unicast saddr for transparent proxy). For other traffic
allow saddr to be unicast or local but if callers forget
to check saddr type use 0 for the output route.

	The resulting handling should be:

- REJECT TCP:
	- in INPUT we can provide addr_type = RTN_LOCAL but
	better allow rejecting traffic delivered with
	local route (no IP address => use RTN_UNSPEC to
	allow also RTN_UNICAST).
	- FORWARD: RTN_UNSPEC => allow RTN_LOCAL/RTN_UNICAST
	saddr, add fix to ignore RTN_BROADCAST and RTN_MULTICAST
	- OUTPUT: RTN_UNSPEC

- NAT, mangle, ip_queue, nf_ip_reroute: RTN_UNSPEC in LOCAL_OUT

- IPVS:
	- use RTN_LOCAL in LOCAL_OUT and FORWARD after SNAT
	to restrict saddr to be local
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pca954x power-on default is channel 0 connected. If multiple pca954x
muxes are connected to the same physical I2C bus, the parent bus will
see channel 0 devices behind both muxes by default. This is bad.

Scenario:
            -- pca954x @ 0x70 -- ch 0 (I2C-bus-101) -- EEPROM @ 0x50
            |
I2C-bus-1 ---
            |
            -- pca954x @ 0x71 -- ch 0 (I2C-bus-111) -- EEPROM @ 0x50

1. Load I2C bus driver: creates I2C-bus-1
2. Load pca954x driver: creates virtual I2C-bus-101 and I2C-bus-111
3. Load eeprom driver
4. Try to read EEPROM @ 0x50 on I2C-bus-101. The transaction will also bleed
   onto I2C-bus-111 because pca954x @ 0x71 channel 0 is connected by default.

Fix: Initialize pca954x to disconnected state in pca954x_probe()
Signed-off-by: NPetri Gynther <pgynther@google.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org

* Print all error and information messages even when debugging is
  disabled.
* Don't use adapter device to log messages before it is ready.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org

Fix the value of chcr for SCIF[2-4]_RX and RIIC[0-9]_RX and
the value of mid_rid for some RIIC.
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

%rip-relative addressing is relative to the first byte of the next instruction,
so we need to add %rip only after we've fetched any immediate bytes.

Based on original patch by Li Xin <xin.li@intel.com>.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Acked-by: NLi Xin <xin.li@intel.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited.
Signed-off-by: NChristian Dietrich <christian.dietrich@informatik.uni-erlangen.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Don't use printk_ratelimit() as an additional condition for returning
on an error. Because when the ratelimit is reached, printk_ratelimit
will return 0 and e.g. in rtas_get_boot_time won't check for an error
condition.
Signed-off-by: NChristian Dietrich <christian.dietrich@informatik.uni-erlangen.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Remove duplicate assignment of SCSI_BNX2_ISCSI in pseries_defconfig
introduced by:
  37e0c21e powerpc/pseries: Enable iSCSI support for a number of cards

causes warning:
arch/powerpc/configs/pseries_defconfig:151:warning: override: reassigning to symbol SCSI_BNX2_ISCSI
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch updates the email address of the at32ap700x_wdt driver supported by
me to an email account I will use on a more regular basis in the future.
Signed-off-by: NHans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6:
  drm/i915: Use chipset-specific irq installers
  drm/i915: forcewake fix after reset
  drm/i915: add Ivy Bridge page flip support
  drm/i915: split page flip queueing into per-chipset functions

Merge branch 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6

* 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Connector: Correctly set the error code in case of success when dispatching receive callbacks
  Connector: Set the CN_NETLINK_USERS correctly
  pti: PTI semantics fix in pti_tty_cleanup.
  pti: ENXIO error case memory leak PTI fix.
  pti: double-free security PTI fix
  drivers:misc: ti-st: fix skipping of change remote baud
  drivers/base/platform.c: don't mark platform_device_register_resndata() as __init_or_module
  st_kim: Handle case of no device found for ID 0
  firmware: fix GOOGLE_SMI kconfig dependency warning

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  MAINTAINERS: add myself as maintainer of USB/IP
  usb: r8a66597-hcd: fix cannot detect low/full speed device
  USB: ehci-ath79: fix a NULL pointer dereference
  USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c
  usb/isp1760: Fix bug preventing the unlinking of control urbs
  USB: Fix up URB error codes to reflect implementation.
  xhci: Always set urb->status to zero for isoc endpoints.
  xhci: Add reset on resume quirk for asrock p67 host
  xHCI 1.0: Incompatible Device Error
  USB: don't let errors prevent system sleep
  USB: don't let the hub driver prevent system sleep
  USB: change maintainership of ohci-hcd and ehci-hcd
  xHCI 1.0: Force Stopped Event(FSE)
  xhci: Don't warn about zeroed bMaxBurst descriptor field.
  USB: Free bandwidth when usb_disable_device is called.
  xhci: Reject double add of active endpoints.
  USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big.
  usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO
  usb: musb: host: compare status for negative error values