“7d433b9f942606f66da8ef68b8baecd2915c5627”上不存在“README.md”
- 29 3月, 2013 40 次提交
-
-
由 Greg Kroah-Hartman 提交于
Merge tag 'iio-for-3.10b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second round of IIO cleanups for the 3.10 cycle 1) A nice little removal of the unwanted private pointer from struct iio_trigger. 2) Some clean up of the ad799x driver. 3) Couple of cleanups for the exynos_adc driver and some documentation. 4) Move the mxs-lradc initialization a little earlier in the driver to avoid wiping out the configuration just after setting it. A nice small set of worthy bits and bobs.
-
由 Doug Anderson 提交于
The exynos ADC won't work without a regulator called "vdd" and a clock called "adc". Document this fact in the device tree bindings. Signed-off-by: NDoug Anderson <dianders@chromium.org> Reviewed-by: NNaveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Alexandre Belloni 提交于
We need to initialize hardware before registering the touchscreen. Else, we end up setting registers in mxs_lradc_ts_open(), getting called just after registering the touchscreen with input_register_device() and by the end of mxs_lradc_probe(), we reset the LRADC block hence losing the correct configuration. Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org> Cc: Fabio Estevam <fabio.estevam@freescale.com>
-
由 Sachin Kamat 提交于
Fixes some typos in the documentation of exynos-adc.txt. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Sachin Kamat 提交于
exynos_adc is a DT only driver and exynos_adc_match table is always compiled in. Hence remove the macro. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Lars-Peter Clausen 提交于
Avoid allocating and freeing the sample buffer for each transfer. Instead allocate it once when we start sampling. Also pre-compute the number of bytes we need to transfer in the same way. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Lars-Peter Clausen 提交于
The driver has support for reporting a channels scale, but none of the channels set the IIO_CHAN_INFO_SCALE mask. Add the IIO_CHAN_INFO_SCALE to all channels to indicate that the drivers supports reporting the scale. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Lars-Peter Clausen 提交于
The ad779x channels all follow the same pattern. Add a helper macro to initialize the channel spec, this allows us to drop quite a few lines. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Lars-Peter Clausen 提交于
Use i2c_smbus_{read,write}_word_data_swapped instead of open-coding it. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Lars-Peter Clausen 提交于
None of the devices supported by this driver have an internal voltage reference, so remove support for it from the driver. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Lars-Peter Clausen 提交于
Remove fields from the ad799x_state struct which are not used. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NJonathan Cameron <jic23@kernel.org>
-
由 Emil Goode 提交于
This patch fixes the following sparse warnings about use of obsolete array initializer: drivers/staging/comedi/drivers/amplc_dio200_pci.c:256:24: warning: obsolete array initializer, use C99 syntax drivers/staging/comedi/drivers/amplc_dio200_pci.c:269:24: warning: obsolete array initializer, use C99 syntax drivers/staging/comedi/drivers/amplc_dio200_pci.c:281:25: warning: obsolete array initializer, use C99 syntax drivers/staging/comedi/drivers/amplc_dio200_pci.c:298:25: warning: obsolete array initializer, use C99 syntax drivers/staging/comedi/drivers/amplc_dio200_pci.c:315:25: warning: obsolete array initializer, use C99 syntax Signed-off-by: NEmil Goode <emilgoode@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This variable in the private data is not used. Remove it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This variable in the private data is not necessary. Remove it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This variable in the private data is not necessary. Remove it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This variable in the private data is not necessary. Remove it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This variable in the private data is not necessary. Remove it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Move the #define's in the private rtd520.h header into the source file and delete the header. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Cleanup the multi-line comments at the beginning of the file so they follow the CodingStyle. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Add a local variable to make this function a bit cleaner and remove the unnecessary comments. The comedi core expects this function to return the number of data parameters used. Change the return from '1' to 'insn->n' to make this more apparent. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Add some local variables to make this function a bit cleaner and remove the unnecessary comments. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Use pci_ioremap_bar() to ioremap the PCI bars used by this driver. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Use the register map defines for the PLX9080 found in plx9080.h instead of the custom named defines in rtd520.h. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This commented out code in s626_ai_insn_read() is just left over development test code. Remove it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Only hook up the analog input command support if the interrupt is available. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This subdevice function is not implemented in the driver. Just remove it. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
For aesthetic reasons, add some whitespace to the subdevice init. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Convert the comedi_subdevice access from pointer match to array access. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Add some local variables to make this function a bit clearer and remove the unnecessary comments. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
Add some local variables to make this function a bit cleaner. The comedi core expects this function to return the number of data parameters used. Change the return from '1' to insn->n to make this more aparent. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
There are a number of uint16_t casts used in the #define's of the constant bit field values as well as the calls to DEBIreplace(). These cause a number of sparse warnings of the type: warning: cast truncates bits from constant value (ffff1cff becomes 1cff) Remove all of the casts and change the types of the parameters to DEBIreplace from uin16_t to unsigned int. This fixes all the warnings. Mask the addr that is or'ed with DEBI_CMD_RDWORD then written to the P_DEBICMD register as well as the val written to the P_DEBIAD register with 0xffff. The addr and val are only 16-bits but the registers are 32-bits. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
The base_address variable in the private data is the ioremap'ed PCI bar 0 resource. For aesthetic reasons, and to shorten some of the lines, rename this variable to 'mmio'. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This macro relies on a local variable having a specific name its also just a wrapper around a readl() call. Remove the macro and just call readl() directly. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
The WR7146 macro relies on a local variable having a specific name. This macro is a wrapper around a writel() call. Remove the macro and just call writel() directly. The SETVEC macro uses the WR7146 macro so remove it as well and just do the writel() directly. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 H Hartley Sweeten 提交于
This macro relies on a local variable having a specific name. Replace it with a new helper function, s626_mc_test(). Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
Since we are programming SR register 18, better name structs/arrays accordingly to avoid confusion. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
Since we only access the third row, we can delete the others. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
SR1B register value is always 3 regardless of video card or RAM type. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
Delete unused struct field. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Aaro Koskinen 提交于
Delete unused XGI330_LCDCapStruct fields. Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-