Introduce a bvec merge function for device mapper devices
for dynamic size restrictions.

This code ensures the requested biovec lies within a single
target and then calls a target-specific function to check
against any constraints imposed by underlying devices.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Change snapshot per-module mempool to per-device mempool.

Per-module mempools could cause a deadlock if multiple
snapshot devices are stacked above each other.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Fix a race condition that returns incorrect data when a write causes an
exception to be allocated whilst a read is still in flight.

The race condition happens as follows:
* A read to non-reallocated sector in the snapshot is submitted so that the
  read is routed to the original device.
* A write to the original device is submitted. The write causes an exception
  that reallocates the block.  The write proceeds.
* The original read is dequeued and reads the wrong data.

This race can be triggered with CFQ scheduler and one thread writing and
multiple threads reading simultaneously.

(This patch relies upon the earlier dm-kcopyd-per-device.patch to avoid a
deadlock.)
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Whenever a snapshot read gets mapped through to the origin, track it in
a per-snapshot hash table indexed by chunk number, using memory allocated
from a new per-snapshot mempool.

We need to track these reads to avoid race conditions which will be fixed
by patches that follow.
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Fix test for reinstate_path method before attempting to use it.
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Julia Lawall <julia@diku.dk>

Return a specific error message if there are an invalid number of multipath
arguments.

This invalid command returns an "Unknown error" because the ti->error field is
not set

dmsetup create --table '0 2 multipath 0 0 1 1 round-robin 0 1 1 /dev/sdh' mpath0
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Rearrange struct dm_io.
Shrinks size from 40 -> 32 allowing more objects/slab.
Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

dm_dirty_log_{init,exit}() can now become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

Free path selector if the arguments are invalid.

This command (note that it is invalid) causes reference leak on module
"dm_round_robin" and prevents the module from being removed.

dmsetup create --table '0 2 multipath 0 0 1 1 round-robin /dev/sdh' mpath0
Signed-off-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NAlasdair G Kergon <agk@redhat.com>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  [PATCH] ocfs2: fix oops in mmap_truncate testing
  configfs: call drop_link() to cleanup after create_link() failure
  configfs: Allow ->make_item() and ->make_group() to return detailed errors.
  configfs: Fix failing mkdir() making racing rmdir() fail
  configfs: Fix deadlock with racing rmdir() and rename()
  configfs: Make configfs_new_dirent() return error code instead of NULL
  configfs: Protect configfs_dirent s_links list mutations
  configfs: Introduce configfs_dirent_lock
  ocfs2: Don't snprintf() without a format.
  ocfs2: Fix CONFIG_OCFS2_DEBUG_FS #ifdefs
  ocfs2/net: Silence build warnings on sparc64
  ocfs2: Handle error during journal load
  ocfs2: Silence an error message in ocfs2_file_aio_read()
  ocfs2: use simple_read_from_buffer()
  ocfs2: fix printk format warnings with OCFS2_FS_STATS=n
  [PATCH 2/2] ocfs2: Instrument fs cluster locks
  [PATCH 1/2] ocfs2: Add CONFIG_OCFS2_FS_STATS config option

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
  pcmcia: ide-cs: Remove outdated comment
  pcmcia: fix cisinfo_t removal
  pcmcia: fix return value in cm4000_cs.c

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix asm/e820.h for userspace inclusion
  x86: fix numaq_tsc_disable
  x86: fix kernel_physical_mapping_init() for large x86 systems

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: do not trace library functions
  ftrace: do not trace scheduler functions
  ftrace: fix lockup with MAXSMP
  ftrace: fix merge buglet

asm-x86/e820.h is included from userspace.  'x86: make e820.c to have
common functions' (b79cd8f1) broke it:

	make -C Documentation/lguest
	cc -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include
lguest.c  -lz -o lguest
	In file included from ../../include/asm-x86/bootparam.h:8,
	                 from lguest.c:45:
	../../include/asm/e820.h:66: error: expected ‘)’ before ‘start’
	../../include/asm/e820.h:67: error: expected ‘)’ before ‘start’
	../../include/asm/e820.h:68: error: expected ‘)’ before ‘start’
	../../include/asm/e820.h:72: error: expected ‘=’, ‘,’, ‘;’, ‘asm’
or ‘__attribute__’ before ‘e820_update_range’
	...
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/numaq_32.c: In function ‘numaq_tsc_disable’:
 arch/x86/kernel/numaq_32.c:99: warning: ‘return’ with a value, in function returning void
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fix calls of smp_call_function*() in arch/ia64/kvm for recent API
changes.

    CC [M]  arch/ia64/kvm/kvm-ia64.o
  arch/ia64/kvm/kvm-ia64.c: In function 'handle_global_purge':
  arch/ia64/kvm/kvm-ia64.c:398: error: too many arguments to function 'smp_call_function_single'
  arch/ia64/kvm/kvm-ia64.c: In function 'kvm_vcpu_kick':
  arch/ia64/kvm/kvm-ia64.c:1696: error: too many arguments to function 'smp_call_function_single'
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Acked-by Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace

* 'ptrace-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace:
  fix dangling zombie when new parent ignores children
  do_wait: return security_task_wait() error code in place of -ECHILD
  ptrace children revamp
  do_wait reorganization

Also fix unwanted rebuilds of the firmware/ihex2fw tool by including
the .ihex2fw.cmd file when present.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Reported-and-tested-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPP
  [S390] qdio: new qdio driver.
  [S390] cio: Export chsc_error_from_response().
  [S390] vmur: Fix return code handling.
  [S390] Fix stacktrace compile bug.
  [S390] Increase default warning stacksize.
  [S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().
  [S390] chsc headers userspace cleanup
  [S390] dasd: fix unsolicited SIM handling.
  [S390] zfcpdump: Make SCSI disk dump tool recognize storage holes

The patch named "powerpc/mpc5121: Add clock driver", also contained
an unrelated and bogus change to the top-level makefile.  This patch
backs out the bad bit.

SHA1 of offending patch: 137e9590)
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Repented-by: NJohn Rigby <jrigby@freescale.com>
[ Heh. Normally I pick these out from the diffstats, but I guess
  I've grown to trust the ppc tree too much ;)   - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

make function tracing more robust: do not trace library functions.

We've already got a sizable list of exceptions:

 ifdef CONFIG_FTRACE
 # Do not profile string.o, since it may be used in early boot or vdso
 CFLAGS_REMOVE_string.o = -pg
 # Also do not profile any debug utilities
 CFLAGS_REMOVE_spinlock_debug.o = -pg
 CFLAGS_REMOVE_list_debug.o = -pg
 CFLAGS_REMOVE_debugobjects.o = -pg
 CFLAGS_REMOVE_find_next_bit.o = -pg
 CFLAGS_REMOVE_cpumask.o = -pg
 CFLAGS_REMOVE_bitmap.o = -pg
 endif

... and the pattern has been that random library functionality showed
up in ftrace's critical path (outside of its recursion check), causing
hard to debug lockups.

So be a bit defensive about it and exclude all lib/*.o functions by
default. It's not that they are overly interesting for tracing purposes
anyway. Specific ones can still be traced, in an opt-in manner.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

do not trace scheduler functions - it's still a bit fragile
and can lock up with:

  http://redhat.com/~mingo/misc/config-Thu_Jul_17_13_34_52_CEST_2008Signed-off-by: NIngo Molnar <mingo@elte.hu>

MAXSMP brings in lots of use of various bitops in smp_processor_id()
and friends - causing ftrace to lock up during bootup:

  calling  anon_inode_init+0x0/0x130
  initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
  calling  acpi_event_init+0x0/0x57
  [ hard hang ]

So exclude the bitops facilities from tracing.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

return value -ENOTSUPP is not valid in userspace context, use
-EOPNOTSUPP instead
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

List of major changes:
- split qdio driver into several files
- seperation of thin interrupt code
- improved handling for multiple thin interrupt devices
- inbound and outbound processing now always runs in tasklet context
- significant less tasklet schedules per interrupt needed
- merged qebsm with non-qebsm handling
- cleanup qdio interface and added kerneldoc
- coding style
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NUtz Bacher <utz.bacher@de.ibm.com>
Reviewed-by: NUrsula Braun <braunu@de.ibm.com>
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

Make chsc_error_from_response() available to chsc callers outside
of chsc.c (namely qdio) to avoid duplicating error checking code.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

Use -EOPNOTSUPP instead of -ENOTSUPP.
Signed-off-by: NFrank Munzert <munzert@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add missing module.h include to fix this:

  CC      arch/s390/kernel/stacktrace.o
arch/s390/kernel/stacktrace.c:84: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:84: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:84: warning: parameter names (without types) in function declaration
arch/s390/kernel/stacktrace.c:97: warning: data definition has no type or storage class
arch/s390/kernel/stacktrace.c:97: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL'
arch/s390/kernel/stacktrace.c:97: warning: parameter names (without types) in function declaration
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

Compiling a kernel with allmodconfig or allyesconfig results in tons
of gcc warnings, because the default maximum stacksize from which on
gcc will emit a warning is just 256 bytes.
Increase this to 2048, so these warnings don't distract from the real
warnings that we need to watch at.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

Kernel headers shouldn't expose functions to userspace.

Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add missing schedule_bh and check that there is 32 bit sense data.
Signed-off-by: NStefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

The kernel part of zfcpdump establishes a new debugfs file zcore/memmap
which exports information on memory layout (start address and length of each
memory chunk) to its userspace counterpart.
Signed-off-by: NFrank Munzert <munzert@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>

-tip testing found a bootup hang here:

  initcall anon_inode_init+0x0/0x130 returned 0 after 0 msecs
  calling  acpi_event_init+0x0/0x57

the bootup should have continued with:

  initcall acpi_event_init+0x0/0x57 returned 0 after 45 msecs

but it hung hard there instead.

bisection led to this commit:

| commit 5806b81a
| Merge: d14c8a68... 6712e299...
| Author: Ingo Molnar <mingo@elte.hu>
| Date:   Mon Jul 14 16:11:52 2008 +0200
|     Merge branch 'auto-ftrace-next' into tracing/for-linus

turns out that i made this mistake in the merge:

  ifdef CONFIG_FTRACE
  # Do not profile debug utilities
  CFLAGS_REMOVE_tsc_64.o = -pg
  CFLAGS_REMOVE_tsc_32.o = -pg

those two files got unified meanwhile - so the dont-profile annotation
got lost. The proper rule is:

  CFLAGS_REMOVE_tsc.o = -pg

i guess this could have been caught sooner if the CFLAGS_REMOVE* kbuild
rule aborted the build if it met a target that does not exist anymore?
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This fixes an arcane bug that we think was a regression introduced
by commit b2b2cbc4.  When a parent
ignores SIGCHLD (or uses SA_NOCLDWAIT), its children would self-reap
but they don't if it's using ptrace on them.  When the parent thread
later exits and ceases to ptrace a child but leaves other live
threads in the parent's thread group, any zombie children are left
dangling.  The fix makes them self-reap then, as they would have
done earlier if ptrace had not been in use.
Signed-off-by: NRoland McGrath <roland@redhat.com>

This reverts the effect of commit f2cc3eb1
"do_wait: fix security checks".  That change reverted the effect of commit
73243284.  The rationale for the original
commit still stands.  The inconsistent treatment of children hidden by
ptrace was an unintended omission in the original change and in no way
invalidates its purpose.

This makes do_wait return the error returned by security_task_wait()
(usually -EACCES) in place of -ECHILD when there are some children the
caller would be able to wait for if not for the permission failure.  A
permission error will give the user a clue to look for security policy
problems, rather than for mysterious wait bugs.
Signed-off-by: NRoland McGrath <roland@redhat.com>

ptrace no longer fiddles with the children/sibling links, and the
old ptrace_children list is gone.  Now ptrace, whether of one's own
children or another's via PTRACE_ATTACH, just uses the new ptraced
list instead.

There should be no user-visible difference that matters.  The only
change is the order in which do_wait() sees multiple stopped
children and stopped ptrace attachees.  Since wait_task_stopped()
was changed earlier so it no longer reorders the children list, we
already know this won't cause any new problems.
Signed-off-by: NRoland McGrath <roland@redhat.com>

This breaks out the guts of do_wait into three subfunctions.
The control flow is less nonobvious without so much goto.
do_wait_thread and ptrace_do_wait contain the main work of the outer loop.
wait_consider_task contains the main work of the inner loop.
Signed-off-by: NRoland McGrath <roland@redhat.com>

Before accessing the device data structure in hardware handlers,
make sure it is a indeed a sdev device.

Yinghai Lu <yhlu.kernel@gmail.com> found the bug on Jul 16, 2008,
and later tested/verified the following fix.
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>