- 31 3月, 2006 12 次提交
-
-
由 Dominik Brodowski 提交于
Remove the unused DEV_RELEASE_PENDING flag, and move the DEV_SUSPEND flag into the p_dev structure, and make use of it at the core level. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Rename pcmcia_device.state (which is used in very few places) to p_state in order to avoid a namespace collision when moving the deprecated dev_link_t into struct pcmcia_device Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
socket.functions is the number of functions, and so must be one larger than the maximum function number. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
If the kernel is configured to not include the deprecated PCMCIA ioctl, some code doesn't need to be built. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove the inclusion of include/config.h as it isn't needed any longer. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Use mutexes in the PCMICA core, as they suffice for what needs to be done. Includes a bugfix from and Signed-off-by Andrew Morton. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Handle config_t structs independent of struct pcmcia_socket, and add reference counting for them. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Access the PCMCIA config_t struct (one per device function) using a pointer in struct pcmcia_device, instead of looking them up in an array. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Janos Farkas 提交于
For some time, the core pcmcia drivers seem not to think single character prod_ids are valid, thus preventing the "cleverly" named "D" "Link DWL-650 11Mbps WLAN Card" Before (as in 2.6.16): PRODID_1="" PRODID_2="Link DWL-650 11Mbps WLAN Card" PRODID_3="Version 01.02" PRODID_4="" MANFID=0156,0002 FUNCID=6 After (with the patch) PRODID_1="D" PRODID_2="Link DWL-650 11Mbps WLAN Card" PRODID_3="Version 01.02" PRODID_4="" MANFID=0156,0002 FUNCID=6 Signed-off-by: NJanos Farkas <chexum@gmail.com> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 11 3月, 2006 1 次提交
-
-
由 Hugh Dickins 提交于
Fix pcmcia_device_probe NULL pointer dereference at startup. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 3月, 2006 1 次提交
-
-
由 Dominik Brodowski 提交于
The second pseudo multi-function device of a PCMCIA card may only be configured once the first one is initialized. Therefore, delay the registration of the second device until the first one is initialized. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net
-
- 14 1月, 2006 1 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 1月, 2006 1 次提交
-
-
由 Dominik Brodowski 提交于
With the "power/state" sysfs interface being deprecated, make another one available which is compatible to what was discussed on the linux PM mailinglist. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 06 1月, 2006 7 次提交
-
-
由 Dominik Brodowski 提交于
Convert users of kmalloc and memset to kzalloc Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Remove the old "detach" mechanism as it is unused now. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Merge the suspend and resume methods for 16-bit PCMCIA cards into the device model -- for both runtime power management and suspend to ram/disk. Bugfix in ds.c by Richard Purdie Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
由 Dominik Brodowski 提交于
Add a return value to pcmcia_validate_mem. Only if we have enough memory available to map the CIS, we should proceed in trying to determine information about the device. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 05 1月, 2006 1 次提交
-
-
由 Kay Sievers 提交于
Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: NKay Sievers <kay.sievers@suse.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 11月, 2005 1 次提交
-
-
由 Dominik Brodowski 提交于
Print out minimal information in dmesg whnever a CardBus or PCMCIA card is inserted into or ejected from a slot. This will make debugging certain types of bugs much easier, and is similar to output produced by other hotpluggable buses. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
-
- 29 10月, 2005 1 次提交
-
-
由 Dmitry Torokhov 提交于
Driver core: pass interface to class intreface methods Pass interface as argument to add() and remove() class interface methods. This way a subsystem can implement generic add/remove handlers and then call interface-specific ones. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 10 9月, 2005 2 次提交
-
-
由 Brice Goglin 提交于
Add a devname parameter to the pcmcia_device structure, fills it with "pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in pcmcia_request_irq. Signed-off-by: NBrice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ingo Molnar 提交于
This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes to 36 bytes. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 8月, 2005 1 次提交
-
-
由 Dominik Brodowski 提交于
The ordering of setting and clearing device_add_pending went wrong on some occasions, causing multifunction cards only to be handled correctly on the first insertion, not on subsequent ones. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 7月, 2005 1 次提交
-
-
由 Pavel Roskin 提交于
There are two problems with the message about missing callback functions: it's not written in correct English and it lacks newline at the end. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 7月, 2005 3 次提交
-
-
由 Dominik Brodowski 提交于
Reduce the occurences of "client_handle_t" which is nothing else than a pointer to struct pcmcia_device by now. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Reduce the occurences of "client_handle_t" which is nothing else than a pointer to struct pcmcia_device by now. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Move the "event handler" to struct pcmcia_driver -- the unified event handler will disappear really soon, but switching it to struct pcmcia_driver in the meantime allows for better "step-by-step" patches. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 6月, 2005 1 次提交
-
-
由 Dominik Brodowski 提交于
Fix up PCMCIA modalias file in sysfs Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 6月, 2005 6 次提交
-
-
由 Dominik Brodowski 提交于
Provide a "modalias" entry in sysfs for PCMCIA devices. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Remove unnecessary includes in ds.c and pcmcia_ioctl.c Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Merge struct pcmcia_bus_socket into struct pcmcia_socket. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
make pcmcia_bus_socket->state a bitfield, and rename it pcmcia_state to prepare for struct pcmcia_bus_socket integration into struct pcmcia_socket. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
struct pcmcia_callback isn't needed for each socket, one is enough for all sockets. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dominik Brodowski 提交于
Move all PCMCIA_IOCTL-related code to a different file. Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> From: Richard Purdie <rpurdie@rpsys.net> The pcmcia-move-pcmcia-ioctl-to-a-separate-file patch was corrupted in -mm2 causing this problem. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-