This makes it a lot easier to test modified versions

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can avoid the costly division for the common case where
we pad the frame to tx_max size as long as we ensure that
tx_max is either the device specified dwNtbOutMaxSize or not
a multiplum of wMaxPacketSize.

Using the preconverted 'maxpacket' field avoids converting
wMaxPacketSize to CPU endianness for every transmitted frame

And since we only will hit the one byte padding rule for short
frames, we can drop testing the skb for tailroom.

The change means that tx_max now represents the real maximum
skb size, enabling us to allocate the correct size instead of
always making room for one extra byte.

Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A number of devices in the wild have turned out to require ZLPs.
Even if this is a spec violation, our priority is to make any
device work as good as possible. Devices needing ZLPs will fail
to receive any full sized frame we send. On the other hand,
devices which do not need the ZLP will still work if we send
them.

This gives us no other option than sending ZLPs by default.

This will prevent devices conforming to the spec from making the
optimizations which are possible without ZLPs.  Adding known
such devices to a whitelist, to avoid the possible negative
impact of the new spec violating default.

Cc: Greg Suarez <gsuarez@smithmicro.com>
Cc: Alexey Orishko <alexey.orishko@gmail.com>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MBIM is a point-to-point protocol transporting raw IP packets
with no L2 headers. Only IPv4 and IPv6 are supported. ARP in
particular is not, which is quite logical given the lack of
L2 headers.

The driver still emulates an ethernet interface, dropping all
unsupported protocols, and avoiding neigbour resolving by
setting the IFF_NOARP flag.

The MBIM specification does not explicitly forbid IPv6 Neighbor
Discovery, and it seems the other OS support will respond to
Neighbor Solicitations on MBIM links. There are therefore
buggy devices out there, which despite the pointlessness, still
require Neighbor Discovery for IPv6 over MBIM.

This is incompatible with the IFF_NOARP flag which disables
both ARP and ND.  We cannot support ARP in any case, so we
have to keep that flag. This patch implements a workaround
for the buggy devices, letting the driver respond directly
to Neighbor Solicitations from the device.

This is not optimal, but will have minimal effect on any sane
device.

Cc: Greg Suarez <gsuarez@smithmicro.com>
Reported-and-tested-by: NThomas Schäfer <tschaefer@t-online.de>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some trailing whitespace.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some whitespace errors.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also fixes an incorrect function comment (probably copy/paste).
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some whitespace errors.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also snipes some whitespace errors.
Signed-off-by: NBen Boeckel <mathstuf@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
This series contains updates to e1000, igb, ixgbe and ixgbevf.

Hong Zhiguo provides a fix for e1000 where tx_ring and adapter->tx_ring
are already of type "struct e1000_tx_ring" so no need to divide by
e1000_tx_ring size in the idx calculation.

Emil provides a fix for ixgbevf to remove a redundant workaround related
to header split and a fix for ixgbe to resolve an issue where the MTA table
can be cleared when the interface is reset while in promisc mode.

Todd provides a fix for igb to prevent ethtool from writing to the iNVM
in i210/i211 devices.  This issue was reported by Marek Vasut <marex@denx.de>.

Anton Blanchard provides a fix for ixgbe to reduce memory consumption
with larger page sizes, seen on PPC.

Don provides a cleanup in ixgbe to replace the IXGBE_DESC_UNUSED macro with
the inline function ixgbevf_desc_unused() to make the logic a bit more
readable.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
A single fix by Alexandre Rames for the recent changes to TSO.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch resolves an issue where the MTA table can be cleared when the
interface is reset while in promisc mode. As result IPv6 traffic between
VFs will be interrupted.

This patch makes the update of the MTA table unconditional to avoid the
inconsistent clearing on reset.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch just replaces the IXGBE_DESC_UNUSED macro with a like named
inline function ixgbevf_desc_unused. The inline function makes the logic
a bit more readable.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The ixgbe driver allocates pages for its receive rings. It currently
uses 512 pages, regardless of page size. During receive handling it
adds the unused part of the page back into the rx ring, avoiding the
need for a new allocation.

On a ppc64 box with 64 threads and 64kB pages, we end up with
512 entries * 64 rx queues * 64kB = 2GB memory used. Even more of a
concern is that we use up 2GB of IOMMU space in order to map all this
memory.

The driver makes a number of decisions based on if PAGE_SIZE is less
than 8kB, so use this as the breakpoint and only allocate 128 entries
on 8kB or larger page sizes.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Don't let ethtool try to write to iNVM in i210/i211.

This fixes an issue seen by Marek Vasut.
Reported-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NTodd Fujinaka <todd.fujinaka@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch removes a workaround related to header split, which is redundant
because the driver does not support splitting packet headers on Rx.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

tx_ring and adapter->tx_ring are already of type "struct
e1000_tx_ring *"
Signed-off-by: NHong Zhiguo <zhiguohong@tencent.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

When using firmware assisted TSO, we use a single DMA mapping for
the linear area of a TSO skb.

We still have to segment the super-packet and insert a descriptor
containing the original headers before each segment of payload, so we
can unmap the linear area only after the last segment is completed.
The unmapping information for the linear area is therefore associated
with the last header descriptor.

We calculate the DMA address to unmap from using the map length and
the invariant that the end of the DMA mapping matches the end of
the data referenced by the last descriptor.  But this invariant is
broken when there is TCP payload in the linear area.

Fix this by adding and using an explicit dma_offset field.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>

Alexander Aring says:

====================
This patch series cleanup the 6LoWPAN header creation and extend the use
of skb_*_header functions.

Patch 2/4 fix issues of parsing the mac header. The ieee802.15.4 header
has a dynamic size which depends on frame control bits. This patch replaces the
static mac header len calculation with a dynamic one.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch drops the direct memcpy on skb and uses the right skb
memcpy functions. Also remove an unnecessary check if plen is non zero.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Reviewed-by: NWerner Almesberger <werner@almesberger.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is necessary to access network header with the skb_network_header
function instead of calculate the position with mac_len, etc.
Do the same for the transport header, when we replace the IPv6 header
with the 6LoWPAN header.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Acked-by: NWerner Almesberger <werner@almesberger.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Set the mac header length while creating the 802.15.4 mac header.

Drop the function for recalculate mac header length in upper layers
which was static and works for intra pan communication only.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Reviewed-by: NWerner Almesberger <werner@almesberger.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On receiving side we don't need to set any headers in skb because the
6LoWPAN layer do not access it. Currently these values will set twice
after calling netif_rx.
Signed-off-by: NAlexander Aring <alex.aring@gmail.com>
Reviewed-by: NWerner Almesberger <werner@almesberger.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After reading the function rt6_check_neigh(), we can
know that the RT6_NUD_FAIL_SOFT can be returned only
when the IS_ENABLE(CONFIG_IPV6_ROUTER_PREF) is false.
so in function find_match(), there is no need to execute
the statement !IS_ENABLED(CONFIG_IPV6_ROUTER_PREF).
Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change is inspired by checkpatch.
Signed-off-by: NWeilong Chen <chenweilong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Copying whole packets with skb_copy_from_linear_data_offset is a pretty
bad idea. CPU was spending time in __copy_user_common and network
performance was lower. With the new solution iperf-measured speed
increased from 116Mb/s to 134Mb/s.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The message dispatching part of tipc_recv_msg() is wrapped layers of
while/if/if/switch, causing out-of-control indentation and does not
look very good. We reduce two indentation levels by separating the
message dispatching from the blocks that checks link state and
sequence numbers, allowing longer function and arg names to be
consistently indented without wrapping. Additionally we also rename
"cont" label to "discard" and add one new label called "unlock_discard"
to make code clearer. In all, these are cosmetic changes that do not
alter the operation of TIPC in any way.
Signed-off-by: NYing Xue <ying.xue@windriver.com>
Reviewed-by: NErik Hugne <erik.hugne@ericsson.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Andreas Bofjäll <andreas.bofjall@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Checking if MAC address is valid using is_valid_ether_addr() is already done in
of_get_mac_address(). While at it, reorganize checking so it matches checks in
other drivers.
Signed-off-by: NLuka Perkov <luka@openwrt.org>
CC: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Checking if MAC address is valid using is_valid_ether_addr() is already done in
of_get_mac_address().
Signed-off-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Checking if MAC address is valid using is_valid_ether_addr() is already done in
of_get_mac_address().
Signed-off-by: NLuka Perkov <luka@openwrt.org>
Acked-by: NDavid Daney <david.daney@cavium.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fast Open currently has a fall back feature to address SYN-data being
dropped but it requires the middle-box to pass on regular SYN retry
after SYN-data. This is implemented in commit aab48743 ("net-tcp:
Fast Open client - detecting SYN-data drops")

However some NAT boxes will drop all subsequent packets after first
SYN-data and blackholes the entire connections.  An example is in
commit 356d7d88 "netfilter: nf_conntrack: fix tcp_in_window for Fast
Open".

The sender should note such incidents and fall back to use the regular
TCP handshake on subsequent attempts temporarily as well: after the
second SYN timeouts the original Fast Open SYN is most likely lost.
When such an event recurs Fast Open is disabled based on the number of
recurrences exponentially.
Signed-off-by: NYuchung Cheng <ycheng@google.com>
Signed-off-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
This series contains updates to vxlan, net, ixgbe, ixgbevf, and i40e.

Joseph provides a single patch against vxlan which removes the burden
from the NIC drivers to check if the vxlan driver is enabled in the
kernel and also makes available the vxlan headrooms to the drivers.

Jacob provides majority of the patches, with patches against net, ixgbe
and ixgbevf.  His net patch adds might_sleep() call to napi_disable so
that every use of napi_disable during atomic context will be visible.
Then Jacob provides a patch to fix qv_lock_napi call in
ixgbe_napi_disable_all.  The other ixgbe patches cleanup
ixgbe_check_minimum_link function to correctly show that there are some
minor loss of encoding, even though we don't calculate it and remove
unnecessary duplication of PCIe bandwidth display.  Lastly, Jacob
provides 4 patches against ixgbevf to add ixgbevf_rx_skb in line with
how ixgbe handles the variations on how packets can be received, adds
support in order to track how many packets were cleaned during busy poll
as part of the extended statistics.

Wei Yongjun provides a fix for i40e to return -ENOMEN in the memory
allocation error handling case instead of returning 0, as done
elsewhere in this function.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Amend the documentation in the mvmdio driver to note the fact
that it is now used by both the mvneta and mv643xx_eth drivers.
Signed-off-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make only a single call to mutex_unlock in orion_mdio_write.
Signed-off-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace manual poll of MVMDIO_SMI_READ_VALID with a call to
orion_mdio_wait_ready.  This ensures a consistent timeout,
eliminates a busy loop, and allows for use of interrupts on
systems that support them.
Signed-off-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Amend orion_mdio_wait_ready so that the same timeout is used when
polling or using wait_event_timeout.  Set the timeout to 1ms.

Replace udelay with usleep_range to avoid a busy loop, and set the
polling interval range as 45us to 55us, so that the first sleep
will be enough in almost all cases.

Generate the same log message at timeout when polling or using
wait_event_timeout.
Signed-off-by: NLeigh Brown <leigh@solinno.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The function needn't to be public, so to make it as static.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The interface type, which is being traced by "struct be_adapter::
if_type", isn't used currently. So we can remove that safely
according to Sathya's comments.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>