The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The interrupt handler should only ever return one of the three irqreturn_t
constants and not an error code. Also make sure to always call
iio_trigger_notify_done before leaving the trigger handler.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The driver assumes that in 13bit mode the 16bit value has
to be shifted to the right by 3 bits. This is not true, in
both 16bit and 13bit mode the MSB is at the same position.
Currently the driver returns a temperature of 194 degrees
Celsius in 13bit mode and 24 degrees Celsius in 16bit mode.
Fix this by using the same algorithm for 16bit and 13bit
mode and by just masking out the lower three bits in 13bit
mode.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Otherwise a write to the resolution entry never returns.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The dev_attr list is initialized in __iio_add_event_config_attrs which
is called only when indio_dev->channels is true. Nevertheless the list
is used unconditionally later in iio_device_register_eventset which
results in a NULL pointer exception. To fix this unconditionally
initialize the list in iio_device_register_eventset.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Since commit 1c6c6952 ("genirq: Reject bogus threaded irq requests") threaded
IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise
the request will fail. This patch adds the IRQF_ONESHOT to IIO drivers where it
is missing.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The channel set assigned to the iio device is not necessarily the same has the
channel set passed to iio_buffer_register. So to avoid possible complications
always work with the channel set pass to iio_buffer_register and ignore the
channel set assigned to the iio device.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NKyungmin Park <kyungmin.park@samsung.com>
Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ben Chan <benchan@chromium.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Forest Bond <forest@alittletooquiet.net>
Cc: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Sparse complains that "arg" is not a __user pointer.  The "argp" and
"arg" variables are equivalent but argp is declared as a __user pointer.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-By: NMartyn Welch <martyn.welch@ge.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a tiny checkpatch.pl warning.
Signed-off-by: NDavid Murray <therealcykey@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The IRQ vector should be saved in MEM space base address according to the
datasheet.
Signed-off-by: NSamuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

All these macros are not used. So, remove this all.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

this following warn is fixed up

drivers/staging/ft1000/ft1000-usb/ft1000_hw.c:1754:
ERROR: open brace '{' following function declarations go on the next line
Signed-off-by: NDevendra Naga <devendra.aaru@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Dynamically allocate my_sym_buf to silence the following warning:

drivers/staging/tidspbridge/dynload/cload.c:
    In function 'dload_symbols':
drivers/staging/tidspbridge/dynload/cload.c:890:
    warning: the frame size of 1040 bytes is larger than 1024 bytes
Signed-off-by: NOmar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Dynamically allocate ibuf to silence the following warning:

drivers/staging/tidspbridge/dynload/cload.c:
    In function 'dload_data':
drivers/staging/tidspbridge/dynload/cload.c:1337:
    warning: the frame size of 1216 bytes is larger than 1024 bytes
Signed-off-by: NOmar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Due to its size, this function declares too many variables,
to split it a new structure has been declared to hold values
as they are read from the baseimage.

While at it, indentation was reduced by renaming variables
and reducing blocks of code with the following structure:

if (success) {
    ...
    if (success)
        ...
}

This fixes the following warning:
drivers/staging/tidspbridge/core/io_sm.c:
	In function 'bridge_io_on_loaded':
drivers/staging/tidspbridge/core/io_sm.c:777:
	warning: the frame size of 1032 bytes is larger
	than 1024 bytes
Signed-off-by: NOmar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

And fix the following warning for passing an incorrect
variable type.

../tiomap3430.c: In function 'user_va2_pa':
../tiomap3430.c:1555:
    warning: passing argument 1 of 'pmd_offset' from
    incompatible pointer type
arch/arm/include/asm/pgtable-2level.h:156:
    note: expected 'struct pud_t *' but argument is of
    type 'pmdval_t (*)[2]'

While at it, eliminate 'if' nesting to increase readability.
Signed-off-by: NOmar Ramirez Luna <omar.ramirez@copitl.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These two functions only has commented code, so remove it.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The function crypto_sep_dump_message don't have any use in this driver. So remove it.
Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed a call to strict_strtoul() into kstrtou8() in
pod_set_midi_postprocess().
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed strict_strtoul() to kstrtou() in pod_set_channel() to take changes in
pod_send_channel() into account.
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Exchanged call to strict_strtoul() with kstrtou8() in pod_resolve().
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Exchange strict_strtoul() with kstrtou8() and make "value" a u8 instead of a
unsigned long. This is also needed for the changed
line6_pod_transmit_parameter().
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adjusted interface of pod_send_channel() in order to take changes of
line6_send_program() into account.
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adjusted interface of line6_send_program() to clarify internal working
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adjusted interface of line6_pod_transmit_parameter() to take changes of
line6_transmit_parameter() into account
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Adjusted strict_strtoul calls to kstrtou8 in order to take the changes of
line6_transmit_parameter() into account.
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Interface of line6_transmit_parameter() adjusted to clarify internal workings
Signed-off-by: NJohannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Update TODO file, which had been neglected.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove spaces between casts and variables from
drivers/staging/vt6656/int.c .
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The style of most kernel code is that there is 1 *space* between the
type of a variable and its name. This patch enforces that in
drivers/staging/vt6656/int.c .
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>