Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 24 8月, 2016 5 次提交
    • X
      phy: micrel: Reenable interrupts during resume for ksz9031 · f64f1482
      由 Xander Huff 提交于 
      Like the ksz8081, the ksz9031 has the behavior where it will clear the
interrupt enable bits when leaving power down. This takes advantage of the
solution provided by f5aba91d.
Signed-off-by: NXander Huff <xander.huff@ni.com>
Signed-off-by: NNathan Sullivan <nathan.sullivan@ni.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f64f1482
    • E
      tcp: properly scale window in tcp_v[46]_reqsk_send_ack() · 20a2b49f
      由 Eric Dumazet 提交于 
      When sending an ack in SYN_RECV state, we must scale the offered
window if wscale option was negotiated and accepted.

Tested:
 Following packetdrill test demonstrates the issue :

0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0

+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0

// Establish a connection.
+0 < S 0:0(0) win 20000 <mss 1000,sackOK,wscale 7, nop, TS val 100 ecr 0>
+0 > S. 0:0(0) ack 1 win 28960 <mss 1460,sackOK, TS val 100 ecr 100, nop, wscale 7>

+0 < . 1:11(10) ack 1 win 156 <nop,nop,TS val 99 ecr 100>
// check that window is properly scaled !
+0 > . 1:1(0) ack 1 win 226 <nop,nop,TS val 200 ecr 100>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      20a2b49f
    • Z
      gianfar: fix size of scatter-gathered frames · 6c389fc9
      由 Zefir Kurtisi 提交于 
      The current scatter-gather logic in gianfar is flawed, since
it does not consider the eTSEC's RxBD 'Data Length' field is
context depening: for the last fragment it contains the full
frame size, while fragments contain the fragment size, which
equals the value written to register MRBLR.

This causes data corruption as soon as the hardware starts
to fragment receiving frames. As a result, the size of
fragmented frames is increased by
(nr_frags - 1) * MRBLR

We first noticed this issue working with DSA, where an ICMP
request sized 1472 bytes causes the scatter-gather logic to
kick in. The full Ethernet frame (1518) gets increased by
DSA (4), GMAC_FCB_LEN (8), and FSL_GIANFAR_DEV_HAS_TIMER
(priv->padding=8) to a total of 1538 octets, which is
fragmented by the hardware and reconstructed by the driver
to a 3074 octet frame.

This patch fixes the problem by adjusting the size of
the last fragment.

It was tested by setting MRBLR to different multiples of
64, proving correct scatter-gather operation on frames
with up to 9000 octets in size.
Signed-off-by: NZefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6c389fc9
    • Z
      gianfar: prevent fragmentation in DSA environments · b323431b
      由 Zefir Kurtisi 提交于 
      The eTSEC register MRBLR defines the maximum space in
the RX buffers and is set to 1536 by gianfar. This
reasonably covers the common use case where the MTU
is kept at default 1500. In that case, the largest
Ethernet frame size of 1518 plus an optional
GMAC_FCB_LEN of 8, and an additional padding of 8
to handle FSL_GIANFAR_DEV_HAS_TIMER totals to 1534
and nicely fit within the chosen MRBLR.

Alas, if the eTSEC is attached to a DSA enabled switch,
the (E)DSA header extension (4 or 8 bytes) causes every
maximum sized frame to be fragmented by the hardware.

This patch increases the maximum RX buffer size by 8
and rounds up to the next multiple of 64, which the
hardware's defines as RX buffer granularity.
Signed-off-by: NZefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      b323431b
    • E
      udp: fix poll() issue with zero sized packets · e83c6744
      由 Eric Dumazet 提交于 
      Laura tracked poll() [and friends] regression caused by commit
e6afc8ac ("udp: remove headers from UDP packets before queueing")

udp_poll() needs to know if there is a valid packet in receive queue,
even if its payload length is 0.

Change first_packet_length() to return an signed int, and use -1
as the indication of an empty queue.

Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing")
Reported-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NEric Dumazet <edumazet@google.com>
Tested-by: NLaura Abbott <labbott@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e83c6744
  3. 23 8月, 2016 12 次提交
  5. 22 8月, 2016 1 次提交
  7. 21 8月, 2016 1 次提交
  9. 20 8月, 2016 16 次提交
  11. 19 8月, 2016 5 次提交