Clean up.

Move the timestamp decoder to match the placement and naming
conventions of the other helpers.  Fold xdr_decode_fattr() into
decode_fattr3(), which is now it's only user.  Fold
xdr_decode_wcc_attr() into decode_wcc_attr(), which is now it's only
user.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.  Remove unused legacy result decoder functions, and any
now unused decoder helper functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The naming scheme of the new decoder functions, which follows the
NFSv4 XDR decoder functions, is slightly different than the scheme
used for the old functions.  Rename the functions as a separate
step to keep the patches clean.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We'd like to prevent local buffer overflows caused by malicious or
broken servers.  New xdr_stream style decoders can do that.

For efficiency, we also eventually want to be able to pass xdr_streams
from call_decode() to all XDR decoding functions, rather than building
an xdr_stream in every XDR decoding function in the kernel.

Static helper functions are left without the "inline" directive.  This
allows the compiler to choose automatically how to optimize these for
size or speed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.  Move the timestamp and the sattr encoder to match the
placement convention of the other helpers, update their coding style,
and refresh their documenting comments.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.  Remove unused legacy argument encoder functions, and any
now unused encoder helper functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The naming scheme of the new encoder functions, which follows the
NFSv4 XDR encoder functions, is slightly different than the scheme
used for the old functions.  Rename the functions as a separate
step to keep the patches clean.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We're interested in taking advantage of the safety benefits of
xdr_streams.  These data structures allow more careful checking for
buffer overflow while encoding.  More careful type checking is also
introduced in the new functions.

For efficiency, we also eventually want to be able to pass xdr_streams
from call_encode() to all XDR encoding functions, rather than building
an xdr_stream in every XDR encoding function in the kernel.  To do
this means all encoders must be ready to handle a passed-in
xdr_stream.

The new encoders follow the modern paradigm for XDR encoders: BUG on
error, and always return a zero status code.

Static helper functions are left without the "inline" directive.  This
allows the compiler to choose automatically how to optimize these for
size or speed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We'd like to prevent local buffer overflows caused by malicious or
broken servers.  New xdr_stream style decoders can do that.

For efficiency, we also eventually want to be able to pass xdr_streams
from call_encode() and call_decode() to all XDR encoding functions,
rather than building an xdr_stream in every XDR encoding and decoding
function in the kernel.

To do all of this, rewrite the XDR encoding and decoding functions in
fs/lockd/xdr.c to use xdr_streams.  This makes them more or less
incompatible with server-side XDR helper functions, so break them out
into a separate source file.

Static helper functions are left without the "inline" directive.  This
allows the compiler to choose automatically how to optimize these for
size or speed.

SHARE-related functionality doesn't seem to be used, as those
functions are hiding behind a #define that isn't set anywhere that I
can find.  And, they've been in there forever (at least as far back as
the kernel's git history goes), yet remain unused.  Let's take the
opportunity to bin them.  It should be easy enough for someone to
introduce proper XDR functions if at some point SHARE-related NLM
functionality is desired.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

Move the timestamp decoder to match the placement and naming
conventions of the other helpers.  Fold xdr_decode_fattr() into
decode_fattr(), which is now it's only user.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.  Remove unused legacy result decoder functions, and any
now unused decoder helper functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We'd like to prevent local buffer overflows caused by malicious or
broken servers.  New xdr_stream style decoders can do that.

For efficiency, we also eventually want to be able to pass xdr_streams
from call_decode() to all XDR decoding functions, rather than building
an xdr_stream in every XDR decoding function in the kernel.

nfs_decode_dirent() is renamed to follow the naming convention of the
other two dirent decoders.

Static helper functions are left without the "inline" directive.  This
allows the compiler to choose automatically how to optimize these for
size or speed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

To distinguish more clearly between the on-the-wire NFSERR_ value and
our local errno values, use the proper type for the argument of
nfs_stat_to_errno().

Add a documenting comment appropriate for a global function shared
outside this source file.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up.

The new helper functions are kept in order by section of RFC 1094.
Move the two timestamp encoders we're keeping, update their coding
style, and refresh their documenting comments.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clean up:  Remove unused legacy argument encoder functions, and any
now unused encoder helper functions.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We're interested in taking advantage of the safety benefits of
xdr_streams.  These data structures allow more careful checking for
buffer overflow while encoding.  More careful type checking is also
introduced in the new functions.

For efficiency, we also eventually want to be able to pass xdr_streams
from call_encode() to all XDR encoding functions, rather than building
an xdr_stream in every XDR encoding function in the kernel.  To do
this means all encoders must be ready to handle a passed-in
xdr_stream.

The new encoders follow the modern paradigm for XDR encoders: BUG on
any error, and always return a zero status code.

Static helper functions are left without the "inline" directive.  This
allows the compiler to choose automatically how to optimize these for
size or speed.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Tested-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: populate initial_page_table
  lguest: restore boot speed
  lguest: fix crash lguest_time_init

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix regression of garbage collection ioctl

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: define separate EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2
  Input: wacom - add another Bamboo Pen ID (0xd4)

Two x86 patches broke lguest:
1) v2.6.35-492-g72d7c3b3, which changed x86 to use the memblock allocator.

In lguest, the host places linear page tables at the top of mem, which
used to be enough to get us up to the swapper_pg_dir page tables.  With
the first patch, the direct mapping tables used that memory:

Before: kernel direct mapping tables up to 4000000 @ 7000-1a000
After: kernel direct mapping tables up to 4000000 @ 3fed000-4000000

I initially fixed this by lying about the amount of memory we had, so
the kernel wouldn't blatt the lguest boot pagetables (yuk!), but then...

2) v2.6.36-rc8-54-gb40827fa, which made x86 boot use initial_page_table.

This was initialized in a part of head_32.S which isn't executed by
lguest; it is then copied into swapper_pg_dir.  So we have to initialize
it; and anyway we switch to it before we blatt the old tables, so that
fixes the previous damage as well.

For the moment, I cut & pasted the code into lguest's boot code, but
next merge window I will merge them.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: x86@kernel.org

lguest is dumb and drops *all* the pagetables for set_pte (which is
only used for kernel mapping manipulation, so it's OK without highmem).

But it's used a lot in boot, too.  As a guest optimization, we
suppressed this flushing until the first page switch.  Now we have
initial_page_table, that happens much earlier, so extend the heuristic
to wait until we switch to something other than the swapper_pg_dir or
initial_page_table.

As measured on my laptop under kvm, this dropped the time-to-mount-root
from 48 seconds to 4.3 seconds.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

fe25c7fc "x86: lguest: Convert to new irq chip functions" converted
enable_lguest_irq() to take a struct irq_data *, but didn't fix the one
internal caller.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
To: x86@kernel.org

On 2.6.37-rc1, garbage collection ioctl of nilfs was broken due to the
commit 263d90ce ("nilfs2: remove own inode hash used for GC"),
and leading to filesystem corruption.

The patch doesn't queue gc-inodes for log writer if they are reused
through the vfs inode cache.  Here, gc-inode is the inode which
buffers blocks to be relocated on GC.  That patch queues gc-inodes in
nilfs_init_gcinode() function, but this function is not called when
they don't have I_NEW flag.  Thus, some of live blocks are wrongly
overrode without being moved to new logs.

This resolves the problem by moving the gc-inode queueing to an outer
function to ensure it's done right.
Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ghash-intel - ghash-clmulni-intel_glue needs err.h

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix typo which broke '..' detection in ext4_find_entry()
  ext4: Turn off multiple page-io submission by default

Without this, gcc 4.5 won't compile xen-netfront and xen-blkfront, where
this is being used to specify array sizes.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: David Miller <davem@davemloft.net>
Cc: Stable Kernel <stable@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The MSM main git tree has changed over to this new address.
Signed-off-by: NDaniel Walker <dwalker@codeaurora.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The install_special_mapping routine (used, for example, to setup the
vdso) skips the security check before insert_vm_struct, allowing a local
attacker to bypass the mmap_min_addr security restriction by limiting
the available pages for special mappings.

bprm_mm_init() also skips the check, and although I don't think this can
be used to bypass any restrictions, I don't see any reason not to have
the security check.

  $ uname -m
  x86_64
  $ cat /proc/sys/vm/mmap_min_addr
  65536
  $ cat install_special_mapping.s
  section .bss
      resb BSS_SIZE
  section .text
      global _start
      _start:
          mov     eax, __NR_pause
          int     0x80
  $ nasm -D__NR_pause=29 -DBSS_SIZE=0xfffed000 -f elf -o install_special_mapping.o install_special_mapping.s
  $ ld -m elf_i386 -Ttext=0x10000 -Tbss=0x11000 -o install_special_mapping install_special_mapping.o
  $ ./install_special_mapping &
  [1] 14303
  $ cat /proc/14303/maps
  0000f000-00010000 r-xp 00000000 00:00 0                                  [vdso]
  00010000-00011000 r-xp 00001000 00:19 2453665                            /home/taviso/install_special_mapping
  00011000-ffffe000 rwxp 00000000 00:00 0                                  [stack]

It's worth noting that Red Hat are shipping with mmap_min_addr set to
4096.
Signed-off-by: NTavis Ormandy <taviso@google.com>
Acked-by: NKees Cook <kees@ubuntu.com>
Acked-by: NRobert Swiecki <swiecki@google.com>
[ Changed to not drop the error code - akpm ]
Reviewed-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing header file:

arch/x86/crypto/ghash-clmulni-intel_glue.c:256: error: implicit declaration of function 'IS_ERR'
arch/x86/crypto/ghash-clmulni-intel_glue.c:257: error: implicit declaration of function 'PTR_ERR'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The desire to keep old names for the EVIOCGKEYCODE/EVIOCSKEYCODE while
extending them to support large scancodes was a mistake. While we tried
to keep ABI intact (and we succeeded in doing that, programs compiled
on older kernels will work on newer ones) there is still a problem with
recompiling existing software with newer kernel headers.

New kernel headers will supply updated ioctl numbers and kernel will
expect that userspace will use struct input_keymap_entry to set and
retrieve keymap data. But since the names of ioctls are still the same
userspace will happily compile even if not adjusted to make use of the
new structure and will start miraculously fail in the field.

To avoid this issue let's revert EVIOCGKEYCODE/EVIOCSKEYCODE definitions
and add EVIOCGKEYCODE_V2/EVIOCSKEYCODE_V2 so that userspace can explicitly
select the style of ioctls it wants to employ.
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NJarod Wilson <jarod@redhat.com>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: It is likely that WORKER_NOT_RUNNING is true
  MAINTAINERS: Add workqueue entry
  workqueue: check the allocation of system_unbound_wq

* 'for-linus' of git://neil.brown.name/md:
  md: protect against NULL reference when waiting to start a raid10.
  md: fix bug with re-adding of partially recovered device.
  md: fix possible deadlock in handling flush requests.
  md: move code in to submit_flushes.
  md: remove handling of flush_pending in md_submit_flush_data

There is a possibility that the last word of a transaction will be lost
if data is not ready.  Re-read in poll_transfer() to solve this issue
when poll_mode is enabled.

Verified on SPI touch screen device.
Signed-off-by: NMajor Lee <major_lee@wistron.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This gets caught by the new sanity check code. Instead of the slash use a
different symbol. This was originally found by Major Lee who proposed a
rather more complex patch which changed the name according to the chip
type.

On the basis that we are in a late -rc and making Linus grumpy isn't always
a good idea (however fun) this is a simple alternative.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There should be a check for the NUL character instead of '0'.

Fortunately the only thing that cares about this is NFS serving, which
is why we didn't notice this in the merge window testing.
Reported-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NAaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: wire up accept4 syscall (non-multiplexed path)
  sh: Enable deprecated IRQ chip APIs for MFD and GPIOLIB drivers.

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2: PRCM: fix some SHIFT macros that were actually bitmasks
  OMAP2+: PM/serial: fix console semaphore acquire during suspend
  OMAP1: SRAM: fix size for OMAP1611 SoCs
  arm: omap2: io: fix clk_get() error check
  arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check
  omap: nand: remove hardware ECC as default
  omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD
  omap: PM debug: fix wake-on-timer debugfs dependency

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6535/1: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix
  ARM: 6534/1: Make CONFIG_FPE_NWFPE depend on !CONFIG_THUMB2_KERNEL
  ARM: 6533/1: Thumb-2: Make CONFIG_THUMB2_KERNEL depend on !CPU_V6
  Change bcmring Maintainer list.
  ARM: Update mach-types
  ARM: 6528/1: Use CTR for the I-cache line size on ARMv7
  ARM: 6527/1: Use CTR instead of CCSIDR for the D-cache line size on ARMv7
  ARM: pxa/palm: fix ifdef around gen_nand driver registration
  ARM: pxa: fix pxa2xx-flash section mismatch
  ARM: mmp2: remove not used clk_rtc

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Write to prom console using indirect buffer.
  sparc: Delete prom_*getchar().
  sparc: Pass buffer pointer all the way down to prom_{get,put}char().
  sparc: Do not export prom_nb{get,put}char().
  sparc64: Delete prom_setcallback().
  sparc64: Unexport prom_service_exists().
  sparc: Kill prom devops_{32,64}.c
  sparc: Remove prom_pathtoinode()
  sparc64: Delete prom_puts() unused.
  SPARC/LEON: removed constant timer initialization as if HZ=100, now it reflects the value of HZ