1. 10 9月, 2012 1 次提交
    • M
      regulator: core: Support bypass mode · f59c8f9f
      Mark Brown 提交于
      Many regulators support a bypass mode where they simply switch their
      input supply to the output. This is mainly used in low power retention
      states where power consumption is extremely low so higher voltage or
      less clean supplies can be used.
      
      Support this by providing ops for the drivers and a consumer API which
      allows the device to be put into bypass mode if all consumers enable it
      and the machine enables permission for this.
      
      This is not supported as a mode since the existing modes are rarely used
      due to fuzzy definition and mostly redundant with modern hardware which is
      able to respond promptly to load changes.
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      Reviewed-by: NGraeme Gregory <gg@slimlogic.co.uk>
      f59c8f9f
  2. 02 9月, 2012 1 次提交
    • J
      time: Move ktime_t overflow checking into timespec_valid_strict · cee58483
      John Stultz 提交于
      Andreas Bombe reported that the added ktime_t overflow checking added to
      timespec_valid in commit 4e8b1452 ("time: Improve sanity checking of
      timekeeping inputs") was causing problems with X.org because it caused
      timeouts larger then KTIME_T to be invalid.
      
      Previously, these large timeouts would be clamped to KTIME_MAX and would
      never expire, which is valid.
      
      This patch splits the ktime_t overflow checking into a new
      timespec_valid_strict function, and converts the timekeeping codes
      internal checking to use this more strict function.
      Reported-and-tested-by: NAndreas Bombe <aeb@debian.org>
      Cc: Zhouping Liu <zliu@redhat.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Prarit Bhargava <prarit@redhat.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: stable@vger.kernel.org
      Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      cee58483
  3. 24 8月, 2012 2 次提交
  4. 23 8月, 2012 1 次提交
    • A
      ARM: omap: allow building omap44xx without SMP · c7a9b09b
      Arnd Bergmann 提交于
      The new omap4 cpuidle implementation currently requires
      ARCH_NEEDS_CPU_IDLE_COUPLED, which only works on SMP.
      
      This patch makes it possible to build a non-SMP kernel
      for that platform. This is not normally desired for
      end-users but can be useful for testing.
      
      Without this patch, building rand-0y2jSKT results in:
      
      drivers/cpuidle/coupled.c: In function 'cpuidle_coupled_poke':
      drivers/cpuidle/coupled.c:317:3: error: implicit declaration of function '__smp_call_function_single' [-Werror=implicit-function-declaration]
      
      It's not clear if this patch is the best solution for
      the problem at hand. I have made sure that we can now
      build the kernel in all configurations, but that does
      not mean it will actually work on an OMAP44xx.
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Acked-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      Tested-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
      Cc: Kevin Hilman <khilman@ti.com>
      Cc: Tony Lindgren <tony@atomide.com>
      c7a9b09b
  5. 22 8月, 2012 6 次提交
    • A
      introduce kref_put_mutex() · 8ad5db8a
      Al Viro 提交于
      equivalent of
      	mutex_lock(mutex);
      	if (!kref_put(kref, release))
      		mutex_unlock(mutex);
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      8ad5db8a
    • M
      mm: compaction: Abort async compaction if locks are contended or taking too long · c67fe375
      Mel Gorman 提交于
      Jim Schutt reported a problem that pointed at compaction contending
      heavily on locks.  The workload is straight-forward and in his own words;
      
      	The systems in question have 24 SAS drives spread across 3 HBAs,
      	running 24 Ceph OSD instances, one per drive.  FWIW these servers
      	are dual-socket Intel 5675 Xeons w/48 GB memory.  I've got ~160
      	Ceph Linux clients doing dd simultaneously to a Ceph file system
      	backed by 12 of these servers.
      
      Early in the test everything looks fine
      
        procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu-------
         r  b       swpd       free       buff      cache   si   so    bi    bo   in   cs  us sy  id wa st
        31 15          0     287216        576   38606628    0    0     2  1158    2   14   1  3  95  0  0
        27 15          0     225288        576   38583384    0    0    18 2222016 203357 134876  11 56  17 15  0
        28 17          0     219256        576   38544736    0    0    11 2305932 203141 146296  11 49  23 17  0
         6 18          0     215596        576   38552872    0    0     7 2363207 215264 166502  12 45  22 20  0
        22 18          0     226984        576   38596404    0    0     3 2445741 223114 179527  12 43  23 22  0
      
      and then it goes to pot
      
        procs -------------------memory------------------ ---swap-- -----io---- --system-- -----cpu-------
         r  b       swpd       free       buff      cache   si   so    bi    bo   in   cs  us sy  id wa st
        163  8          0     464308        576   36791368    0    0    11 22210  866  536   3 13  79  4  0
        207 14          0     917752        576   36181928    0    0   712 1345376 134598 47367   7 90   1  2  0
        123 12          0     685516        576   36296148    0    0   429 1386615 158494 60077   8 84   5  3  0
        123 12          0     598572        576   36333728    0    0  1107 1233281 147542 62351   7 84   5  4  0
        622  7          0     660768        576   36118264    0    0   557 1345548 151394 59353   7 85   4  3  0
        223 11          0     283960        576   36463868    0    0    46 1107160 121846 33006   6 93   1  1  0
      
      Note that system CPU usage is very high blocks being written out has
      dropped by 42%. He analysed this with perf and found
      
        perf record -g -a sleep 10
        perf report --sort symbol --call-graph fractal,5
          34.63%  [k] _raw_spin_lock_irqsave
                  |
                  |--97.30%-- isolate_freepages
                  |          compaction_alloc
                  |          unmap_and_move
                  |          migrate_pages
                  |          compact_zone
                  |          compact_zone_order
                  |          try_to_compact_pages
                  |          __alloc_pages_direct_compact
                  |          __alloc_pages_slowpath
                  |          __alloc_pages_nodemask
                  |          alloc_pages_vma
                  |          do_huge_pmd_anonymous_page
                  |          handle_mm_fault
                  |          do_page_fault
                  |          page_fault
                  |          |
                  |          |--87.39%-- skb_copy_datagram_iovec
                  |          |          tcp_recvmsg
                  |          |          inet_recvmsg
                  |          |          sock_recvmsg
                  |          |          sys_recvfrom
                  |          |          system_call
                  |          |          __recv
                  |          |          |
                  |          |           --100.00%-- (nil)
                  |          |
                  |           --12.61%-- memcpy
                   --2.70%-- [...]
      
      There was other data but primarily it is all showing that compaction is
      contended heavily on the zone->lock and zone->lru_lock.
      
      commit [b2eef8c0: mm: compaction: minimise the time IRQs are disabled
      while isolating pages for migration] noted that it was possible for
      migration to hold the lru_lock for an excessive amount of time. Very
      broadly speaking this patch expands the concept.
      
      This patch introduces compact_checklock_irqsave() to check if a lock
      is contended or the process needs to be scheduled. If either condition
      is true then async compaction is aborted and the caller is informed.
      The page allocator will fail a THP allocation if compaction failed due
      to contention. This patch also introduces compact_trylock_irqsave()
      which will acquire the lock only if it is not contended and the process
      does not need to schedule.
      Reported-by: NJim Schutt <jaschut@sandia.gov>
      Tested-by: NJim Schutt <jaschut@sandia.gov>
      Signed-off-by: NMel Gorman <mgorman@suse.de>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c67fe375
    • W
      string: do not export memweight() to userspace · c3a5ce04
      WANG Cong 提交于
      Fix the following warning:
      
        usr/include/linux/string.h:8: userspace cannot reference function or variable defined in the kernel
      Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
      Acked-by: NAkinobu Mita <akinobu.mita@gmail.com>
      Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c3a5ce04
    • D
    • E
      af_netlink: force credentials passing [CVE-2012-3520] · e0e3cea4
      Eric Dumazet 提交于
      Pablo Neira Ayuso discovered that avahi and
      potentially NetworkManager accept spoofed Netlink messages because of a
      kernel bug.  The kernel passes all-zero SCM_CREDENTIALS ancillary data
      to the receiver if the sender did not provide such data, instead of not
      including any such data at all or including the correct data from the
      peer (as it is the case with AF_UNIX).
      
      This bug was introduced in commit 16e57262
      (af_unix: dont send SCM_CREDENTIALS by default)
      
      This patch forces passing credentials for netlink, as
      before the regression.
      
      Another fix would be to not add SCM_CREDENTIALS in
      netlink messages if not provided by the sender, but it
      might break some programs.
      
      With help from Florian Weimer & Petr Matousek
      
      This issue is designated as CVE-2012-3520
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Cc: Petr Matousek <pmatouse@redhat.com>
      Cc: Florian Weimer <fweimer@redhat.com>
      Cc: Pablo Neira Ayuso <pablo@netfilter.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e0e3cea4
    • R
      target: Remove unused se_cmd.cmd_spdtl · af74115e
      Roland Dreier 提交于
      This was originally for helping fabrics to determine overflow/underflow
      status, and has been superceeded by SCF_OVERFLOW_BIT + SCF_UNDERFLOW_BIT.
      Signed-off-by: NRoland Dreier <roland@purestorage.com>
      Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
      af74115e
  6. 20 8月, 2012 4 次提交
    • P
      net: ipv6: fix oops in inet_putpeer() · 9d7b0fc1
      Patrick McHardy 提交于
      Commit 97bab73f (inet: Hide route peer accesses behind helpers.) introduced
      a bug in xfrm6_policy_destroy(). The xfrm_dst's _rt6i_peer member is not
      initialized, causing a false positive result from inetpeer_ptr_is_peer(),
      which in turn causes a NULL pointer dereference in inet_putpeer().
      
      Pid: 314, comm: kworker/0:1 Not tainted 3.6.0-rc1+ #17 To Be Filled By O.E.M. To Be Filled By O.E.M./P4S800D-X
      EIP: 0060:[<c03abf93>] EFLAGS: 00010246 CPU: 0
      EIP is at inet_putpeer+0xe/0x16
      EAX: 00000000 EBX: f3481700 ECX: 00000000 EDX: 000dd641
      ESI: f3481700 EDI: c05e949c EBP: f551def4 ESP: f551def4
       DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
      CR0: 8005003b CR2: 00000070 CR3: 3243d000 CR4: 00000750
      DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
      DR6: ffff0ff0 DR7: 00000400
       f551df04 c0423de1 00000000 f3481700 f551df18 c038d5f7 f254b9f8 f551df28
       f34f85d8 f551df20 c03ef48d f551df3c c0396870 f30697e8 f24e1738 c05e98f4
       f5509540 c05cd2b4 f551df7c c0142d2b c043feb5 f5509540 00000000 c05cd2e8
       [<c0423de1>] xfrm6_dst_destroy+0x42/0xdb
       [<c038d5f7>] dst_destroy+0x1d/0xa4
       [<c03ef48d>] xfrm_bundle_flo_delete+0x2b/0x36
       [<c0396870>] flow_cache_gc_task+0x85/0x9f
       [<c0142d2b>] process_one_work+0x122/0x441
       [<c043feb5>] ? apic_timer_interrupt+0x31/0x38
       [<c03967eb>] ? flow_cache_new_hashrnd+0x2b/0x2b
       [<c0143e2d>] worker_thread+0x113/0x3cc
      
      Fix by adding a init_dst() callback to struct xfrm_policy_afinfo to
      properly initialize the dst's peer pointer.
      Signed-off-by: NPatrick McHardy <kaber@trash.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      9d7b0fc1
    • E
      af_packet: don't emit packet on orig fanout group · c0de08d0
      Eric Leblond 提交于
      If a packet is emitted on one socket in one group of fanout sockets,
      it is transmitted again. It is thus read again on one of the sockets
      of the fanout group. This result in a loop for software which
      generate packets when receiving one.
      This retransmission is not the intended behavior: a fanout group
      must behave like a single socket. The packet should not be
      transmitted on a socket if it originates from a socket belonging
      to the same fanout group.
      
      This patch fixes the issue by changing the transmission check to
      take fanout group info account.
      Reported-by: NAleksandr Kotov <a1k@mail.ru>
      Signed-off-by: NEric Leblond <eric@regit.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c0de08d0
    • T
      dt: introduce for_each_available_child_of_node, of_get_next_available_child · 3296193d
      Timur Tabi 提交于
      Macro for_each_child_of_node() makes it easy to iterate over all of the
      children for a given device tree node, including those nodes that are
      marked as unavailable (i.e. status = "disabled").
      
      Introduce for_each_available_child_of_node(), which is like
      for_each_child_of_node(), but it automatically skips unavailable nodes.
      This also requires the introduction of helper function
      of_get_next_available_child(), which returns the next available child
      node.
      Signed-off-by: NTimur Tabi <timur@freescale.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3296193d
    • R
      ALSA: fix pcm.h kernel-doc warning and notation · 8513915a
      Randy Dunlap 提交于
      Fix kernel-doc warning in <sound/pcm.h> and add function name to make
      the kernel-doc notation complete.
      
      Warning(include/sound/pcm.h:1081): No description found for parameter 'substream'
      Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
      Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      8513915a
  7. 17 8月, 2012 3 次提交
  8. 15 8月, 2012 11 次提交
  9. 14 8月, 2012 1 次提交
    • W
      mutex: Place lock in contended state after fastpath_lock failure · 0bce9c46
      Will Deacon 提交于
      ARM recently moved to asm-generic/mutex-xchg.h for its mutex
      implementation after the previous implementation was found to be missing
      some crucial memory barriers. However, this has revealed some problems
      running hackbench on SMP platforms due to the way in which the
      MUTEX_SPIN_ON_OWNER code operates.
      
      The symptoms are that a bunch of hackbench tasks are left waiting on an
      unlocked mutex and therefore never get woken up to claim it. This boils
      down to the following sequence of events:
      
              Task A        Task B        Task C        Lock value
      0                                                     1
      1       lock()                                        0
      2                     lock()                          0
      3                     spin(A)                         0
      4       unlock()                                      1
      5                                   lock()            0
      6                     cmpxchg(1,0)                    0
      7                     contended()                    -1
      8       lock()                                        0
      9       spin(C)                                       0
      10                                  unlock()          1
      11      cmpxchg(1,0)                                  0
      12      unlock()                                      1
      
      At this point, the lock is unlocked, but Task B is in an uninterruptible
      sleep with nobody to wake it up.
      
      This patch fixes the problem by ensuring we put the lock into the
      contended state if we fail to acquire it on the fastpath, ensuring that
      any blocked waiters are woken up when the mutex is released.
      Signed-off-by: NWill Deacon <will.deacon@arm.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Chris Mason <chris.mason@fusionio.com>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: <stable@vger.kernel.org>
      Reviewed-by: NNicolas Pitre <nico@linaro.org>
      Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
      Link: http://lkml.kernel.org/n/tip-6e9lrw2avczr0617fzl5vqb8@git.kernel.orgSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      0bce9c46
  10. 13 8月, 2012 2 次提交
  11. 11 8月, 2012 2 次提交
  12. 10 8月, 2012 3 次提交
    • K
      Yama: higher restrictions should block PTRACE_TRACEME · 9d8dad74
      Kees Cook 提交于
      The higher ptrace restriction levels should be blocking even
      PTRACE_TRACEME requests. The comments in the LSM documentation are
      misleading about when the checks happen (the parent does not go through
      security_ptrace_access_check() on a PTRACE_TRACEME call).
      Signed-off-by: NKees Cook <keescook@chromium.org>
      Cc: stable@vger.kernel.org # 3.5.x and later
      Signed-off-by: NJames Morris <james.l.morris@oracle.com>
      9d8dad74
    • P
      netfilter: nf_ct_sip: fix IPv6 address parsing · 02b69cbd
      Patrick McHardy 提交于
      Within SIP messages IPv6 addresses are enclosed in square brackets in most
      cases, with the exception of the "received=" header parameter. Currently
      the helper fails to parse enclosed addresses.
      
      This patch:
      
      - changes the SIP address parsing function to enforce square brackets
        when required, and accept them when not required but present, as
        recommended by RFC 5118.
      
      - adds a new SDP address parsing function that never accepts square
        brackets since SDP doesn't use them.
      
      With these changes, the SIP helper correctly parses all test messages
      from RFC 5118 (Session Initiation Protocol (SIP) Torture Test Messages
      for Internet Protocol Version 6 (IPv6)).
      Signed-off-by: NPatrick McHardy <kaber@trash.net>
      Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      02b69cbd
    • E
      net: tcp: ipv6_mapped needs sk_rx_dst_set method · 63d02d15
      Eric Dumazet 提交于
      commit 5d299f3d (net: ipv6: fix TCP early demux) added a
      regression for ipv6_mapped case.
      
      [   67.422369] SELinux: initialized (dev autofs, type autofs), uses
      genfs_contexts
      [   67.449678] SELinux: initialized (dev autofs, type autofs), uses
      genfs_contexts
      [   92.631060] BUG: unable to handle kernel NULL pointer dereference at
      (null)
      [   92.631435] IP: [<          (null)>]           (null)
      [   92.631645] PGD 0
      [   92.631846] Oops: 0010 [#1] SMP
      [   92.632095] Modules linked in: autofs4 sunrpc ipv6 dm_mirror
      dm_region_hash dm_log dm_multipath dm_mod video sbs sbshc battery ac lp
      parport sg snd_hda_intel snd_hda_codec snd_seq_oss snd_seq_midi_event
      snd_seq snd_seq_device pcspkr snd_pcm_oss snd_mixer_oss snd_pcm
      snd_timer serio_raw button floppy snd i2c_i801 i2c_core soundcore
      snd_page_alloc shpchp ide_cd_mod cdrom microcode ehci_hcd ohci_hcd
      uhci_hcd
      [   92.634294] CPU 0
      [   92.634294] Pid: 4469, comm: sendmail Not tainted 3.6.0-rc1 #3
      [   92.634294] RIP: 0010:[<0000000000000000>]  [<          (null)>]
      (null)
      [   92.634294] RSP: 0018:ffff880245fc7cb0  EFLAGS: 00010282
      [   92.634294] RAX: ffffffffa01985f0 RBX: ffff88024827ad00 RCX:
      0000000000000000
      [   92.634294] RDX: 0000000000000218 RSI: ffff880254735380 RDI:
      ffff88024827ad00
      [   92.634294] RBP: ffff880245fc7cc8 R08: 0000000000000001 R09:
      0000000000000000
      [   92.634294] R10: 0000000000000000 R11: ffff880245fc7bf8 R12:
      ffff880254735380
      [   92.634294] R13: ffff880254735380 R14: 0000000000000000 R15:
      7fffffffffff0218
      [   92.634294] FS:  00007f4516ccd6f0(0000) GS:ffff880256600000(0000)
      knlGS:0000000000000000
      [   92.634294] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
      [   92.634294] CR2: 0000000000000000 CR3: 0000000245ed1000 CR4:
      00000000000007f0
      [   92.634294] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
      0000000000000000
      [   92.634294] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
      0000000000000400
      [   92.634294] Process sendmail (pid: 4469, threadinfo ffff880245fc6000,
      task ffff880254b8cac0)
      [   92.634294] Stack:
      [   92.634294]  ffffffff813837a7 ffff88024827ad00 ffff880254b6b0e8
      ffff880245fc7d68
      [   92.634294]  ffffffff81385083 00000000001d2680 ffff8802547353a8
      ffff880245fc7d18
      [   92.634294]  ffffffff8105903a ffff88024827ad60 0000000000000002
      00000000000000ff
      [   92.634294] Call Trace:
      [   92.634294]  [<ffffffff813837a7>] ? tcp_finish_connect+0x2c/0xfa
      [   92.634294]  [<ffffffff81385083>] tcp_rcv_state_process+0x2b6/0x9c6
      [   92.634294]  [<ffffffff8105903a>] ? sched_clock_cpu+0xc3/0xd1
      [   92.634294]  [<ffffffff81059073>] ? local_clock+0x2b/0x3c
      [   92.634294]  [<ffffffff8138caf3>] tcp_v4_do_rcv+0x63a/0x670
      [   92.634294]  [<ffffffff8133278e>] release_sock+0x128/0x1bd
      [   92.634294]  [<ffffffff8139f060>] __inet_stream_connect+0x1b1/0x352
      [   92.634294]  [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
      [   92.634294]  [<ffffffff8104b333>] ? wake_up_bit+0x25/0x25
      [   92.634294]  [<ffffffff813325f5>] ? lock_sock_nested+0x74/0x7f
      [   92.634294]  [<ffffffff8139f223>] ? inet_stream_connect+0x22/0x4b
      [   92.634294]  [<ffffffff8139f234>] inet_stream_connect+0x33/0x4b
      [   92.634294]  [<ffffffff8132e8cf>] sys_connect+0x78/0x9e
      [   92.634294]  [<ffffffff813fd407>] ? sysret_check+0x1b/0x56
      [   92.634294]  [<ffffffff81088503>] ? __audit_syscall_entry+0x195/0x1c8
      [   92.634294]  [<ffffffff811cc26e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
      [   92.634294]  [<ffffffff813fd3e2>] system_call_fastpath+0x16/0x1b
      [   92.634294] Code:  Bad RIP value.
      [   92.634294] RIP  [<          (null)>]           (null)
      [   92.634294]  RSP <ffff880245fc7cb0>
      [   92.634294] CR2: 0000000000000000
      [   92.648982] ---[ end trace 24e2bed94314c8d9 ]---
      [   92.649146] Kernel panic - not syncing: Fatal exception in interrupt
      
      Fix this using inet_sk_rx_dst_set(), and export this function in case
      IPv6 is modular.
      Reported-by: NAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: NEric Dumazet <edumazet@google.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      63d02d15
  13. 09 8月, 2012 3 次提交
    • S
      block: disable discard request merge temporarily · 276f0f5d
      Shaohua Li 提交于
      The SCSI discard request merge never worked, and looks no solution
      for in future, let's disable it temporarily.
      Signed-off-by: NShaohua Li <shli@fusionio.com>
      Reviewed-by: NChristoph Hellwig <hch@lst.de>
      Signed-off-by: NJens Axboe <axboe@kernel.dk>
      276f0f5d
    • A
      Input: eeti_ts: pass gpio value instead of IRQ · 4eef6cbf
      Arnd Bergmann 提交于
      The EETI touchscreen asserts its IRQ line as soon as it has data in its
      internal buffers. The line is automatically deasserted once all data has
      been read via I2C. Hence, the driver has to monitor the GPIO line and
      cannot simply rely on the interrupt handler reception.
      
      In the current implementation of the driver, irq_to_gpio() is used to
      determine the GPIO number from the i2c_client's IRQ value.
      
      As irq_to_gpio() is not available on all platforms, this patch changes
      this and makes the driver ignore the passed in IRQ. Instead, a GPIO is
      added to the platform_data struct and gpio_to_irq is used to derive the
      IRQ from that GPIO. If this fails, bail out. The driver is only able to
      work in environments where the touchscreen GPIO can be mapped to an
      IRQ.
      
      Without this patch, building raumfeld_defconfig results in:
      
      drivers/input/touchscreen/eeti_ts.c: In function 'eeti_ts_irq_active':
      drivers/input/touchscreen/eeti_ts.c:65:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
      Signed-off-by: NDaniel Mack <zonque@gmail.com>
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Cc: stable@vger.kernel.org (v3.2+)
      Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
      Cc: Sven Neumann <s.neumann@raumfeld.com>
      Cc: linux-input@vger.kernel.org
      Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
      4eef6cbf
    • A
      ARM: pxa: remove irq_to_gpio from ezx-pcap driver · 59ee93a5
      Arnd Bergmann 提交于
      The irq_to_gpio function was removed from the pxa platform
      in linux-3.2, and this driver has been broken since.
      
      There is actually no in-tree user of this driver that adds
      this platform device, but the driver can and does get enabled
      on some platforms.
      
      Without this patch, building ezx_defconfig results in:
      
      drivers/mfd/ezx-pcap.c: In function 'pcap_isr_work':
      drivers/mfd/ezx-pcap.c:205:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration]
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
      Cc: stable@vger.kernel.org (v3.2+)
      Cc: Samuel Ortiz <sameo@linux.intel.com>
      Cc: Daniel Ribeiro <drwyrm@gmail.com>
      59ee93a5