Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

After reading all device items from the chunk tree, don't
exit the loop and then navigate down the tree again to find
the chunk items. Instead just read all device items and
chunk items with a single tree search. This is possible
because all device items are found before any chunk item in
the chunks tree.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

There is no reason for this sort of jackassery.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Previously we only added blocks to the list to have their backrefs checked if
the level of the block is right above the one we are searching for.  This is
because we want to make sure we don't add the entire path up to the root to the
lists to make sure we process things one at a time.  This assumes that if any
blocks in the path to the root are going to be not checked (shared in other
words) then they will be in the level right above the current block on up.  This
isn't quite right though since we can have blocks higher up the list that are
shared because they are attached to a reloc root.  But we won't add this block
to be checked and then later on we will BUG_ON(!upper->checked).  So instead
keep track of wether or not we've queued a block to be checked in this current
search, and if we haven't go ahead and queue it to be checked.  This patch fixed
the panic I was seeing where we BUG_ON(!upper->checked).  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If our item isn't big enough to have an actual inline item when we have skinny
metadata enabled just return 1 in find_inline_backref so we can move on to the
next item.  This probably wasn't causing a problem since we check the values of
ptr and end properly, but just in case this will keep us from doing extra work.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

First of all we no longer set EXTENT_DIRTY when we dirty an extent so this patch
removes the clearing of EXTENT_DIRTY since it confuses me.  This patch also adds
clearing EXTENT_DEFRAG and also doing EXTENT_DO_ACCOUNTING when we have errors.
This is because if we are clearing delalloc without adding an ordered extent
then we need to make sure the enospc handling stuff is accounted for.  Also if
this range was DEFRAG we need to make sure that bit is cleared so we dont leak
it.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This patch removes the io_tree argument for extent_clear_unlock_delalloc since
we always use &BTRFS_I(inode)->io_tree, and it separates out the extent tree
operations from the page operations.  This way we just pass in the extent bits
we want to clear and then pass in the operations we want done to the pages.
This is because I'm going to fix what extent bits we clear in some cases and
rather than add a bunch of new flags we'll just use the actual extent bits we
want to clear.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When we read several pages at once, we needn't get the extent map object
every time we deal with a page, and we can cache the extent map object.
So, we can reduce the search time of the extent map, and besides that, we
also can reduce the lock contention of the extent map tree.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

In the past, we cached the checksum value in the extent state object, so we
had to split the extent state object by the block size, or we had no space
to keep this checksum value. But it increased the lock contention of the
extent state tree.

Now we removed this limit by caching the checksum into the bio object, so
it is unnecessary to do the extent state operations by the block size, we
can do it in batches, in this way, we can reduce the lock contention of
the extent state tree.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Before applying this patch, we set the uptodate flag and unlock the extent
by the page size, it is unnecessary, we can do it in batches, it can reduce
the lock contention of the extent state tree.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Before applying this patch, we cached the csum value into the extent state
tree when reading some data from the disk, this operation increased the lock
contention of the state tree.

Now, we just store the csum value into the bio structure or other unshared
structure, so we can reduce the lock contention.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This patch add some branch prediction hints into the end IO function
of the read page, it reduced the percentage of the branch misses from
5.5% to 4.9%.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Some options are missing in btrfs_show_options(), this patch
adds them.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Although for most time, int is enough for subvolid, we should
ensure safety in theory.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I just notice the following commands succeed:
	mount <dev> <mnt> -o thread_pool=-1

This is ridiculous, only positive thread_pool makes sense,this
patch adds sanity checks for them, and also catches the error of
ENOMEM if allocating memory fails.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The alloc_rbio() frees "raid_map" and "bbio" on error, so there is a
potential double free bug in raid56_parity_write().  The
raid56_parity_write() and raid56_parity_recover() functions should still
free "raid_map" and "bbio" on error if other errors occur though, so I
have added some more calls to kfree().
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We can end up with inodes on the auto defrag list that exist on roots that are
going to be deleted.  This is extra work we don't need to do, so just bail if
our root has 0 root refs.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I was hitting the BUG_ON() at the end of merge_reloc_roots() because we were
aborting the transaction at some point previously and then getting an error when
we tried to drop the reloc root.  I fixed btrfs_drop_snapshot to re-add us to
the dead roots list if we failed, but this isn't the right thing to do for reloc
roots since it uses root->root_list for it's own stuff in order to know what
needs to be cleaned up.  So fix btrfs_drop_snapshot to only do the re-add if we
aren't dropping for reloc, and handle errors from merge_reloc_root() by dropping
the reloc root we are processing since it won't be on the list of roots to
cleanup.  With this patch my reproducer no longer panics.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I was getting warnings when running find ./ -type f -exec btrfs fi defrag -f {}
\; from record_one_backref because ret was set.  Turns out it was because it was
set to 1 because the search slot didn't come out exact and we never reset it.
So reset it to 0 right after the search so we don't leak this and get
uneccessary warnings.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

btrfs_ioctl_get_fslabel() and btrfs_ioctl_set_fslabel()
used root->fs_info->volume_mutex mutex which caused operations
like balance to block set/get label operation until its
completion and generally balance operation takes a long
time to complete, so it will be annoying to the user when
cli appears hung

also this patch will add a bit of optimization within
the btrfs_ioctl_get_falabel() function.

v1->v2:
   use fs_info->super_lock instead of uuid_mutex
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This is confusing, sometimes the key type is printed in hex (without
a leading "0x" which makes things even more complicated), sometimes
in decimal...
Change it to be in decimal everywhere.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This shows exactly how btrfs processes the delayed refs onto disks,
which is very helpful on understanding delayed ref mechanism and
debugging related bugs.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

 btrfs_space_info->block_groups.

The current code uses integer literals to index
btrfs_space_info->block_groups[] array. Instead use corresponding
enums from 'enum btrfs_raid_types'.
Signed-off-by: Nchandan <chandan@linux.vnet.ibm.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Some codes still use the cpu_to_lexx instead of the
BTRFS_SETGET_STACK_FUNCS declared in ctree.h.

Also added some BTRFS_SETGET_STACK_FUNCS for btrfs_header btrfs_timespec
and other structures.
Signed-off-by: NQu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: NMiao Xie <miaoxie@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We call ulist_free(qgroup_ulist) in btrfs_free_qgroup_config(),
and btrfs_free_qgroup_config() may be called in two cases:

(1)umount filesystem
(2)disabling quota

However, if we firstly disable quota and then umount filesystem,
a double free happens. Fix it.
Signed-off-by: NWang Shilong <wangsl.fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The function relocation.c:add_data_references() was not checking
if all calls to __add_tree_block() and find_data_references() were
succeeding or not.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The log message level 'critical' is verbose enough, 'emergency' beeps on
all terminals.
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

So to cache free space, we iterate every extent item to gather free space info.

When we have say 10,000 non-inline extent refs(such as BTRFS_EXTENT_DATA_REF),
it takes quite a long time, and since inline extent refs and non-inline ones have
same objectid in their keys, we can just re-search the tree with the next address
to skip non-inline references.

(This is found by dedup feature because dedup extents can end up with many
non-inline extent refs.)
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I recently did some ENOSPC testing that involved filling the disk
while create and removing snapshots in a loop. During the test cycle,
I ran into an ENOSPC when trying to remove a snapshot, leaving the fs
stuck in ENOSPC even after a umount/mount cycle.

This patch allow subvolume removal to fall back onto the global
block reservation in order to succeed when it would have failed
otherwise.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we're looking for a metadata item in the tree and the
search fails with return value of 1, and the slot doesn't
point to the first item in the leaf, check if the previous
item in the leaf corresponds to an extent item for the same
object id - if it does, then don't do another tree search
to get it.

This optimization is already done by btrfs-progs.

V2: updated commit message.
Signed-off-by: NFilipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Device scanning waits on the uuid_mutex, which can result in a very long
wait if dev delete is shrinking the device.
Signed-off-by: NCarey Underwood <cwillu@cwillu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We've been seeing spurious complaints out of lockdep because the lock class name
changes.  This is happening because when we drop a snapshot we will lock a block
before we've read it in, which sets the lockdep class to whatever the default
is.  Then once we read the thing in we reset the lockdep class to what it is
supposed to be, which blows lockdeps' mind.  This patch should fix the problem,
it appears to be the only place where we do this sort of thing.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

With this fix the lzo code behaves like the zlib code by returning an
error
code when compression does not help reduce the size of the file.
This is currently not a bug since the compressed size is checked again
in
the calling method compress_file_range.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Previously we held the tree mod lock when adding stuff because we use it to
check and see if we truly do want to track tree modifications.  This is
admirable, but GFP_ATOMIC in a critical area that is going to get hit pretty
hard and often is not nice.  So instead do our basic checks to see if we don't
need to track modifications, and if those pass then do our allocation, and then
when we go to insert the new modification check if we still care, and if we
don't just free up our mod and return.  Otherwise we're good to go and we can
carry on.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When btrfs readdir() hits the last entry it sets the readdir offset to a
huge value to stop buggy apps from breaking when the same name is
returned by readdir() with concurrent rename()s.

But unconditionally setting the offset to INT_MAX causes readdir() to
loop returning any entries with offsets past INT_MAX.  It only takes a
few hours of constant file creation and removal to create entries past
INT_MAX.

So let's set the huge offset to LLONG_MAX if the last entry has already
overflowed 32bit loff_t.   Without large offsets behaviour is identical.
With large offsets 64bit apps will work and 32bit apps will be no more
broken than they currently are if they see large offsets.
Signed-off-by: NZach Brown <zab@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

A user reported a panic when running with autodefrag and deleting snapshots.
This is because we could end up trying to add the root to the dead roots list
twice.  To fix this check to see if we are empty before adding ourselves to the
dead roots list.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The ceph guys tripped over this bug where we were still holding onto the
original path that we used to copy the inode with when logging.  This is based
on Chris's fix which was reported to fix the problem.  We need to drop the paths
in two cases anyway so just move the drop up so that we don't have duplicate
code.  Thanks,

Cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>