* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (27 commits)
  Driver core: fix race in dev_driver_string
  Driver Core: Early platform driver buffer
  sysfs: sysfs_setattr remove unnecessary permission check.
  sysfs: Factor out sysfs_rename from sysfs_rename_dir and sysfs_move_dir
  sysfs: Propagate renames to the vfs on demand
  sysfs: Gut sysfs_addrm_start and sysfs_addrm_finish
  sysfs: In sysfs_chmod_file lazily propagate the mode change.
  sysfs: Implement sysfs_getattr & sysfs_permission
  sysfs: Nicely indent sysfs_symlink_inode_operations
  sysfs: Update s_iattr on link and unlink.
  sysfs: Fix locking and factor out sysfs_sd_setattr
  sysfs: Simplify iattr time assignments
  sysfs: Simplify sysfs_chmod_file semantics
  sysfs: Use dentry_ops instead of directly playing with the dcache
  sysfs: Rename sysfs_d_iput to sysfs_dentry_iput
  sysfs: Update sysfs_setxattr so it updates secdata under the sysfs_mutex
  debugfs: fix create mutex racy fops and private data
  Driver core: Don't remove kobjects in device_shutdown.
  firmware_class: make request_firmware_nowait more useful
  Driver-Core: devtmpfs - set root directory mode to 0755
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits)
  USB: mos7840: add device IDs for B&B electronics devices
  USB: ftdi_sio: add USB device ID's for B&B Electronics line
  USB: musb: musb_host: fix sparse warning
  USB: musb: musb_gadget: fix sparse warning
  USB: musb: omap2430: fix sparse warning
  USB: core: message: fix sparse warning
  USB: core: hub: fix sparse warning
  USB: core: fix sparse warning for static function
  USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
  USB: Check bandwidth when switching alt settings.
  USB: Refactor code to find alternate interface settings.
  USB: xhci: Fix command completion after a drop endpoint.
  USB: xhci: Make reverting an alt setting "unfailable".
  USB: usbtmc: Use usb_clear_halt() instead of custom code.
  USB: xhci: Add correct email and files to MAINTAINERS entry.
  USB: ehci-omap.c: introduce missing kfree
  USB: xhci-mem.c: introduce missing kfree
  USB: add remove_id sysfs attr for usb drivers
  USB: g_multi kconfig: fix depends and help text
  USB: option: add pid for ZTE
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: handle receive packets with a data length of zero

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Always process the whole breakpoint list on activate or deactivate
  kgdb: continue and warn on signal passing from gdb
  kgdb,x86: do not set kgdb_single_step on x86
  kgdb: allow for cpu switch when single stepping
  kgdb,i386: Fix corner case access to ss with NMI watch dog exception
  kgdb: Replace strstr() by strchr() for single-character needles
  kgdbts: Read buffer overflow
  kgdb: Read buffer overflow
  kgdb,x86: remove redundant test

* 'drm-nouveau-pony' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/nouveau: Add DRM driver for NVIDIA GPUs

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/ttm: export some functions useful to drivers using ttm
  drm/radeon/kms/avivo: fix typo in new_pll module description
  drm/radeon/kms: Convert radeon to new ttm_bo_init
  drm/ttm: Convert ttm_buffer_object_init to use ttm_placement

Queueing to receive an ISO packet with a payload length of zero
silently does nothing in dualbuffer mode, and crashes the kernel in
packet-per-buffer mode.  Return an error in dualbuffer mode, because
the DMA controller won't let us do what we want, and work correctly in
packet-per-buffer mode.
Signed-off-by: NJay Fenlason <fenlason@redhat.com>
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Cc: stable@kernel.org

* git://git.kernel.org/pub/scm/linux/kernel/git/viro/mmap:
  Add missing alignment check in arch/score sys_mmap()
  fix broken aliasing checks for MAP_FIXED on sparc32, mips, arm and sh
  Get rid of open-coding in ia64_brk()
  sparc_brk() is not needed anymore
  switch do_brk() to get_unmapped_area()
  Take arch_mmap_check() into get_unmapped_area()
  fix a struct file leak in do_mmap_pgoff()
  Unify sys_mmap*
  Cut hugetlb case early for 32bit on ia64
  arch_mmap_check() on mn10300
  Kill ancient crap in s390 compat mmap
  arm: add arch_mmap_check(), get rid of sys_arm_mremap()
  file ->get_unmapped_area() shouldn't duplicate work of get_unmapped_area()
  kill useless checks in sparc mremap variants
  fix pgoff in "have to relocate" case of mremap()
  fix the arch checks in MREMAP_FIXED case
  fix checks for expand-in-place mremap
  do_mremap() untangling, part 3
  do_mremap() untangling, part 2
  untangling do_mremap(), part 1

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits)
  PCI: fix coding style issue in pci_save_state()
  PCI: add pci_request_acs
  PCI: fix BUG_ON triggered by logical PCIe root port removal
  PCI: remove ifdefed pci_cleanup_aer_correct_error_status
  PCI: unconditionally clear AER uncorr status register during cleanup
  x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource
  PCI: portdrv: remove redundant definitions
  PCI: portdrv: remove unnecessary struct pcie_port_data
  PCI: portdrv: minor cleanup for pcie_port_device_register
  PCI: portdrv: add missing irq cleanup
  PCI: portdrv: enable device before irq initialization
  PCI: portdrv: cleanup service irqs initialization
  PCI: portdrv: check capabilities first
  PCI: portdrv: move PME capability check
  PCI: portdrv: remove redundant pcie type calculation
  PCI: portdrv: cleanup pcie_device registration
  PCI: portdrv: remove redundant pcie_port_device_probe
  PCI: Always set prefetchable base/limit upper32 registers
  PCI: read-modify-write the pcie device control register when initiating pcie flr
  PCI: show dma_mask bits in /sys
  ...

Fixed up conflicts in:
	arch/x86/kernel/amd_iommu_init.c
	drivers/pci/dmar.c
	drivers/pci/hotplug/acpiphp_glue.c

Reviewed-by: NJohn Pilles <jpilles@bb-elec.com>
Signed-off-by: NCliff Brake <cbrake@bec-systems.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reviewed-by: NJohn Pilles <jpilles@bb-elec.com>
Signed-off-by: NCliff Brake <cbrake@bec-systems.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

drivers/usb/musb/musb_host.c:1642:9: warning: symbol 'status' shadows an earlier one
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warnings:

drivers/usb/musb/musb_gadget.c:1161:5: warning: symbol 'musb_gadget_set_halt' was not declared. Should it be static?

drivers/usb/musb/musb_gadget.c:1244:5: warning: symbol 'musb_gadget_set_wedge' was not declared. Should it be static?
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

drivers/usb/musb/omap2430.c:314:16: warning: Using plain integer as NULL pointer
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

drivers/usb/core/message.c:1583:6: warning: symbol '__usb_queue_reset_device' was not declared. Should it be static?
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

drivers/usb/core/hub.c:1664:37: warning: Using plain integer as NULL pointer
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix the following sparse warning:

drivers/usb/core/usb.c:1033:15: warning: symbol 'usb_debug_devices' was not declared. Should it be static?
Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If g_ether and g_multi are both built CONFIG_USB_ETH_RNDIS symbol
may be redefined in the later and, whats even worse, g_ether's settings
may affect g_multi's.  This adds a USB_ETH_RNDIS symbol defined at the
beginning of ether.c and multi.c according toproper KConfig settings.
Signed-off-by: NMichal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make the USB core check the bandwidth when switching from one
interface alternate setting to another.  Also check the bandwidth
when resetting a configuration (so that alt setting 0 is used).  If
this check fails, the device's state is unchanged.  If the device
refuses the new alt setting, re-instate the old alt setting in the
host controller hardware.

If a USB device doesn't have an alternate interface setting 0, install
the first alt setting in its descriptors when a new configuration is
requested, or the device is reset.

Add a mutex per root hub to protect bandwidth operations:
adding/reseting/changing configurations, and changing alternate interface
settings.  We want to ensure that the xHCI host controller and the USB
device are set up for the same configurations and alternate settings.
There are two (possibly three) steps to do this:

 1. The host controller needs to check that bandwidth is available for a
    different setting, by issuing and waiting for a configure endpoint
    command.
 2. Once that returns successfully, a control message is sent to the
    device.
 3. If that fails, the host controller must be notified through another
    configure endpoint command.

The mutex is used to make these three operations seem atomic, to prevent
another driver from using more bandwidth for a different device while
we're in the middle of these operations.

While we're touching the bandwidth code, rename usb_hcd_check_bandwidth()
to usb_hcd_alloc_bandwidth().  This function does more than just check
that the bandwidth change won't exceed the bus bandwidth; it actually
changes the bandwidth configuration in the xHCI host controller.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Refactor out the code to find alternate interface settings into
usb_find_alt_setting().  Print a debugging message and return null if the
alt setting is not found.

While we're at it, correct a bug in the refactored code.  The interfaces
in the configuration's interface cache are not necessarily in numerical
order, so we can't just use the interface number as an array index.  Loop
through the interface caches, looking for the correct interface.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The xHCI driver issues a Configure Endpoint command for two reasons:
 - a new configuration or alternate interface setting is selected
 - a quirky Fresco Logic prototype requires the command after a Reset
   Endpoint command.
The xHCI driver only waits on the command in the first case.

When a configure endpoint command completes, the driver needs to know why
the command was generated.  When the driver only supported selecting an
initial configuration, the check was simple.  Unfortunately that check
doesn't work now that the driver supports alternate interfaces.  If an
endpoint must be dropped (because it's not in the new alternate setting)
and no new endpoints are added, the math involving
xhci_last_valid_endpoint() will assign -1 to an unsigned integer and cause
an out-of-bounds array access.

Move the check for the quirky hardware sooner and avoid the bad array
access.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When a driver wants to switch to a different alternate setting for an
interface, the USB core will (soon) check whether there is enough
bandwidth.  Once the new alternate setting is installed in the xHCI
hardware, the USB core will send a USB_REQ_SET_INTERFACE control
message.  That can fail in various ways, and the USB core needs to be
able to reinstate the old alternate setting.

With the old code, reinstating the old alt setting could fail if the
there's not enough memory to allocate new endpoint rings.  Keep
around a cache of (at most 31) endpoint rings for this case.  When we
successfully switch the xHCI hardware to the new alt setting, the old
alt setting's rings will be stored in the cache.  Therefore we'll
always have enough rings to satisfy a conversion back to a previous
device setting.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Make the USB Test & Measurement driver use usb_clear_halt() instead of
usb_control_msg() to clear a stalled endpoint.  This will allow devices to
be tested under an xHCI host controller.  The endpoint stall will not be
cleared in the internal xHCI hardware state unless usb_clear_halt() is
used.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Steve Holland <sdh4@iastate.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Jouni Ryno <Jouni.Ryno@fmi.fi>
Cc: Gergely Imreh <imrehg@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the xHCI driver files to its MAINTAINERS entry so that I'm Cc'd on
cleanup patches.  Update the email address to one I actually use for
sending patches and responding to Linux mailing list emails.
Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Error handling code following a kzalloc should free the allocated data.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Accroding commit 0994375e, which is adding remove_id sysfs attr
for pci drivers, for management tools dynamically bind/unbind
a pci/usb devices to a specified drivers; with this patch,
the management tools can be simplied.

And the original code didn't handle the failure of
usb_create_newid_file, fixed in this patch.
Signed-off-by: NCHENG Renquan <rqcheng@smu.edu.sg>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

USB_G_MULTI uses block and net interface functions, so make it
depend on both of those.  Otherwise there are lots of build errors.

Fix USB_G_MULTI config help text typos and copy/paste error.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds ZTE modem devices.
Signed-off-by: NMing Zhao <zhao.ming9@zte.com.cn>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Reported-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Don't leak an urb in wusb_dev_alloc() if the following kmalloc() failed.
Reported-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When building qTDs (sTDs) from a scatter-gather list, the length of the
qTD must be a multiple of wMaxPacketSize if the transfer continues into
another qTD.

This also fixes a link failure on configurations for 32 bit processors
with 64 bit dma_addr_t (e.g., CONFIG_HIGHMEM_64G).
Signed-off-by: NDavid Vrabel <david.vrabel@csr.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1312) fixes a minor bug in usb-storage.  The
fill_inquiry() routine neglects to pre-load the inquiry data buffer
with spaces.  As a result, if the vendor name is shorter than 8
characters or the product name is shorter than 16, the remainder will
be filled with garbage.

The patch also removes some unnecessary calls to strlen().
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1311) fixes a problem in usb-storage: Some devices are
pretty broken when it comes to reporting sense data.  The information
they send back indicates that they have more than 18 bytes of sense
data available, but when the system asks for more than 18 they fail or
hang.  The symptom is that probing fails with multiple resets.

The patch adds a new BAD_SENSE flag to indicate that usb-storage
should never ask for more than 18 bytes of sense data.  The flag can
be set in an unusual_devs entry or via the "quirks=" module parameter,
and it is set automatically whenever a REQUEST SENSE command for more
than 18 bytes fails or times out.

An unusual_devs entry is added for the Agfa photo frame, which uses a
Prolific chip having this bug.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NDaniel Kukula <daniel.kuku@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1303) revises the USB Power Management infrastructure to
make it compatible with the new driver-model Runtime PM framework:

	Drivers are no longer allowed to access intf->pm_usage_cnt
	directly; the PM framework manages its own usage counters.

	usb_autopm_set_interface() is eliminated, because it directly
	sets intf->pm_usage_cnt.

	usb_autopm_enable() and usb_autopm_disable() are eliminated,
	because they call usb_autopm_set_interface().

	usb_autopm_get_interface_no_resume() and
	usb_autopm_put_interface_no_suspend() are added.  They
	correspond to pm_runtime_get_noresume() and
	pm_runtime_put_noidle() in the PM framework.

	The power/level attribute no longer accepts "suspend", only
	"on" and "auto".  The PM framework doesn't allow devices to be
	forced into a suspended mode.

The hub driver contains the only code that violates the new
guidelines.  It is updated to use the new interface routines instead.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is not exported from the usb core, yet we rely on it to create
paths to interfaces for this device in sysfs.  Export it to make
userspace tools have an easier time to figure things out.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For TWL family of power management ICs, USB charging works only
when USB regulators are in enabled state: 3v1, 1v5, 1v8

On a USB cable attach, twl4030_phy_resume(twl) function enables
the regulators. Enable USB charging, only after all regulators
are enabled.

Its observed that enabling USB charging before regulators are
enabled, causes USB charging to fail.

Tested on: Zoom2: omap3430: ES3.1 + TWL5030
Needs T2-MADC and T2-BCI drivers which are still not upstreamed.
Signed-off-by: NMoiz Sonasath <m-sonasath@ti.com>
Signed-off-by: NLeed Aguilar <leed.aguilar@ti.com>
Acked-by: NVikram Pandita <vikram.pandita@ti.com>
Acked-by: NAnand Gadiyar <gadiyar@ti.com>
Acked-by: NNishanth Menon <nm@ti.com>
Acked-by: NFelipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

usb_bulk_msg() transfers only bytes up to the maximum packet size.
It must be repeated by the usbtmc driver until all bytes of a TMC message
are transfered.

Without this patch, ETIMEDOUT is reported when writing TMC messages
larger than the maximum USB bulk size and the transfer remains incomplete.
The user will notice that the device hangs and must be reset by either closing
the application or pulling the plug.
Signed-off-by: NAndre Herms <andre.herms@tec-venture.de>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove the pointless 'do () while (0)' loop from musb_g_tx() -- it
makes this function symmetric to musb_g_rx()...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Stop playing with musb->lock and abusing musb_gadget_set_halt() in
the code clearing the endpoint halt feature -- instead, manipulate
the registers directly.

While at it, get rid uf unneeded line breaks and over-indentation in
the code setting the endpoint halt feature.
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>