Extend x86 architecture syscall tracing support with syscall
metadata table details.

(The upcoming core syscall tracing modifications rely on this.)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1236955332-10133-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: decrease hangs risks with the graph tracer on slow systems

Since the function graph tracer can spend too much time on timer
interrupts, it's better now to use the more lightweight local
clock. Anyway, the function graph traces are more reliable on a
per cpu trace.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <49af243d.06e9300a.53ad.ffff840c@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix to prevent NMI lockup

If the page fault handler produces a WARN_ON in the modifying of
text, and the system is setup to have a high frequency of NMIs,
we can lock up the system on a failure to modify code.

The modifying of code with NMIs allows all NMIs to modify the code
if it is about to run. This prevents a modifier on one CPU from
modifying code running in NMI context on another CPU. The modifying
is done through stop_machine, so only NMIs must be considered.

But if the write causes the page fault handler to produce a warning,
the print can slow it down enough that as soon as it is done
it will take another NMI before going back to the process context.
The new NMI will perform the write again causing another print and
this will hang the box.

This patch turns off the writing as soon as a failure is detected
and does not wait for it to be turned off by the process context.
This will keep NMIs from getting stuck in this back and forth
of print outs.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: keep kernel text read only

Because dynamic ftrace converts the calls to mcount into and out of
nops at run time, we needed to always keep the kernel text writable.

But this defeats the point of CONFIG_DEBUG_RODATA. This patch converts
the kernel code to writable before ftrace modifies the text, and converts
it back to read only afterward.

The kernel text is converted to read/write, stop_machine is called to
modify the code, then the kernel text is converted back to read only.

The original version used SYSTEM_STATE to determine when it was OK
or not to change the code to rw or ro. Andrew Morton pointed out that
using SYSTEM_STATE is a bad idea since there is no guarantee to what
its state will actually be.

Instead, I moved the check into the set_kernel_text_* functions
themselves, and use a local variable to determine when it is
OK to change the kernel text RW permissions.

[ Update: Ingo Molnar suggested moving the prototypes to cacheflush.h ]
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

There is nothing really arch specific of the push and pop functions
used by the function graph tracer. This patch moves them to generic
code.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The constraint used for retrieving and restoring the parent function
pointer is incorrect. The parent variable is a pointer, and the
address of the pointer is modified by the asm statement and not
the pointer itself. It is incorrect to pass it in as an output
constraint since the asm will never update the pointer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix to prevent a kernel crash on fault

If for some reason the pointer to the parent function on the
stack takes a fault, the fix up code will not return back to
the original faulting code. This can lead to unpredictable
results and perhaps even a kernel panic.

A fault should not happen, but if it does, we should simply
disable the tracer, warn, and continue running the kernel.
It should not lead to a kernel crash.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The constraint used for retrieving and restoring the parent function
pointer is incorrect. The parent variable is a pointer, and the
address of the pointer is modified by the asm statement and not
the pointer itself. It is incorrect to pass it in as an output
constraint since the asm will never update the pointer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

When the function graph tracer picks a return address, it ensures this address
is really a kernel text one by calling __kernel_text_address()

Actually this path has never been taken.Its role was more likely to debug the tracer
on the beginning of its development but this function is wasteful since it is called
for every traced function.

The fault check is already sufficient.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

Now that a generic in_nmi is available, this patch removes the
special code in the ring_buffer and implements the in_nmi generic
version instead.

With this change, I was also able to rename the "arch_ftrace_nmi_enter"
back to "ftrace_nmi_enter" and remove the code from the ring buffer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The function graph tracer piggy backed onto the dynamic ftracer
to use the in_nmi custom code for dynamic tracing. The problem
was (as Andrew Morton pointed out) it really only wanted to bail
out if the context of the current CPU was in NMI context. But the
dynamic ftrace in_nmi custom code was true if _any_ CPU happened
to be in NMI context.

Now that we have a generic in_nmi interface, this patch changes
the function graph code to use it instead of the dynamic ftarce
custom code.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

The in_nmi variable in x86 arch ftrace.c is a misnomer.
Andrew Morton pointed out that the in_nmi variable is incremented
by all CPUS. It can be set when another CPU is running an NMI.

Since this is actually intentional, the fix is to rename it to
what it really is: "nmi_running"
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: prevent deadlock in NMI

The ring buffers are not yet totally lockless with writing to
the buffer. When a writer crosses a page, it grabs a per cpu spinlock
to protect against a reader. The spinlocks taken by a writer are not
to protect against other writers, since a writer can only write to
its own per cpu buffer. The spinlocks protect against readers that
can touch any cpu buffer. The writers are made to be reentrant
with the spinlocks disabling interrupts.

The problem arises when an NMI writes to the buffer, and that write
crosses a page boundary. If it grabs a spinlock, it can be racing
with another writer (since disabling interrupts does not protect
against NMIs) or with a reader on the same CPU. Luckily, most of the
users are not reentrant and protects against this issue. But if a
user of the ring buffer becomes reentrant (which is what the ring
buffers do allow), if the NMI also writes to the ring buffer then
we risk the chance of a deadlock.

This patch moves the ftrace_nmi_enter called by nmi_enter() to the
ring buffer code. It replaces the current ftrace_nmi_enter that is
used by arch specific code to arch_ftrace_nmi_enter and updates
the Kconfig to handle it.

When an NMI is called, it will set a per cpu variable in the ring buffer
code and will clear it when the NMI exits. If a write to the ring buffer
crosses page boundaries inside an NMI, a trylock is used on the spin
lock instead. If the spinlock fails to be acquired, then the entry
is discarded.

This bug appeared in the ftrace work in the RT tree, where event tracing
is reentrant. This workaround solved the deadlocks that appeared there.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Get rid of 'waited' stack variable.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Provide a way to pause the function graph tracer

As suggested by Steven Rostedt, the previous patch that prevented from
spinlock function tracing shouldn't use the raw_spinlock to fix it.
It's much better to follow lockdep with normal spinlock, so this patch
adds a new flag for each task to make the function graph tracer able
to be paused. We also can send an ftrace_printk whithout worrying of
the irrelevant traced spinlock during insertion.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Import: robustness checks

Add more checks in the function graph code to detect errors and
perhaps print out better information if a bug happens.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: feature, let entry function decide to trace or not

This patch lets the graph tracer entry function decide if the tracing
should be done at the end as well. This requires all function graph
entry functions return 1 if it should trace, or 0 if the return should
not be traced.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new ftrace_graph_stop function

While developing more features of function graph, I hit a bug that
caused the WARN_ON to trigger in the prepare_ftrace_return function.
Well, it was hard for me to find out that was happening because the
bug would not print, it would just cause a hard lockup or reboot.
The reason is that it is not safe to call printk from this function.

Looking further, I also found that it calls unregister_ftrace_graph,
which grabs a mutex and calls kstop machine. This would definitely
lock the box up if it were to trigger.

This patch adds a fast and safe ftrace_graph_stop() which will
stop the function tracer. Then it is safe to call the WARN ON.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up

There exists macros for x86 asm to handle x86_64 and i386.
This patch updates function graph asm to use them.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: extend and enable the function graph tracer to 64-bit x86

This patch implements the support for function graph tracer under x86-64.
Both static and dynamic tracing are supported.

This causes some small CPP conditional asm on arch/x86/kernel/ftrace.c I
wanted to use probe_kernel_read/write to make the return address
saving/patching code more generic but it causes tracing recursion.

That would be perhaps useful to implement a notrace version of these
function for other archs ports.

Note that arch/x86/process_64.c is not traced, as in X86-32. I first
thought __switch_to() was responsible of crashes during tracing because I
believed current task were changed inside but that's actually not the
case (actually yes, but not the "current" pointer).

So I will have to investigate to find the functions that harm here, to
enable tracing of the other functions inside (but there is no issue at
this time, while process_64.c stays out of -pg flags).

A little possible race condition is fixed inside this patch too. When the
tracer allocate a return stack dynamically, the current depth is not
initialized before but after. An interrupt could occur at this time and,
after seeing that the return stack is allocated, the tracer could try to
trace it with a random uninitialized depth. It's a prevention, even if I
hadn't problems with it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: more efficient code for ftrace graph tracer

This patch uses the dynamic patching, when available, to patch
the function graph code into the kernel.

This patch will ease the way for letting both function tracing
and function graph tracing run together.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: feature

This patch sets a C-like output for the function graph tracing.
For this aim, we now call two handler for each function: one on the entry
and one other on return. This way we can draw a well-ordered call stack.

The pid of the previous trace is loosely stored to be compared against
the one of the current trace to see if there were a context switch.

Without this little feature, the call tree would seem broken at
some locations.
We could use the sched_tracer to capture these sched_events but this
way of processing is much more simpler.

2 spaces have been chosen for indentation to fit the screen while deep
calls. The time of execution in nanosecs is printed just after closed
braces, it seems more easy this way to find the corresponding function.
If the time was printed as a first column, it would be not so easy to
find the corresponding function if it is called on a deep depth.

I plan to output the return value but on 32 bits CPU, the return value
can be 32 or 64, and its difficult to guess on which case we are.
I don't know what would be the better solution on X86-32: only print
eax (low-part) or even edx (high-part).

Actually it's thee same problem when a function return a 8 bits value, the
high part of eax could contain junk values...

Here is an example of trace:

sys_read() {
  fget_light() {
  } 526
  vfs_read() {
    rw_verify_area() {
      security_file_permission() {
        cap_file_permission() {
        } 519
      } 1564
    } 2640
    do_sync_read() {
      pipe_read() {
        __might_sleep() {
        } 511
        pipe_wait() {
          prepare_to_wait() {
          } 760
          deactivate_task() {
            dequeue_task() {
              dequeue_task_fair() {
                dequeue_entity() {
                  update_curr() {
                    update_min_vruntime() {
                    } 504
                  } 1587
                  clear_buddies() {
                  } 512
                  add_cfs_task_weight() {
                  } 519
                  update_min_vruntime() {
                  } 511
                } 5602
                dequeue_entity() {
                  update_curr() {
                    update_min_vruntime() {
                    } 496
                  } 1631
                  clear_buddies() {
                  } 496
                  update_min_vruntime() {
                  } 527
                } 4580
                hrtick_update() {
                  hrtick_start_fair() {
                  } 488
                } 1489
              } 13700
            } 14949
          } 16016
          msecs_to_jiffies() {
          } 496
          put_prev_task_fair() {
          } 504
          pick_next_task_fair() {
          } 489
          pick_next_task_rt() {
          } 496
          pick_next_task_fair() {
          } 489
          pick_next_task_idle() {
          } 489

------------8<---------- thread 4 ------------8<----------

finish_task_switch() {
} 1203
do_softirq() {
  __do_softirq() {
    __local_bh_disable() {
    } 669
    rcu_process_callbacks() {
      __rcu_process_callbacks() {
        cpu_quiet() {
          rcu_start_batch() {
          } 503
        } 1647
      } 3128
      __rcu_process_callbacks() {
      } 542
    } 5362
    _local_bh_enable() {
    } 587
  } 8880
} 9986
kthread_should_stop() {
} 669
deactivate_task() {
  dequeue_task() {
    dequeue_task_fair() {
      dequeue_entity() {
        update_curr() {
          calc_delta_mine() {
          } 511
          update_min_vruntime() {
          } 511
        } 2813
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

This patch changes the name of the "return function tracer" into
function-graph-tracer which is a more suitable name for a tracing
which makes one able to retrieve the ordered call stack during
the code flow.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: use deeper function tracing depth safely

Some tests showed that function return tracing needed a more deeper depth
of function calls. But it could be unsafe to store these return addresses
to the stack.

So these arrays will now be allocated dynamically into task_struct of current
only when the tracer is activated.

Typical scheme when tracer is activated:
- allocate a return stack for each task in global list.
- fork: allocate the return stack for the newly created task
- exit: free return stack of current
- idle init: same as fork

I chose a default depth of 50. I don't have overruns anymore.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: help to find the better depth of trace

We decided to arbitrary define the depth of function return trace as
"20". Perhaps this is not enough. To help finding an optimal depth, we
measure now the overrun: the number of functions that have been missed
for the current thread. By default this is not displayed, we have to
do set a particular flag on the return tracer: echo overrun >
/debug/tracing/trace_options And the overrun will be printed on the
right.

As the trace shows below, the current 20 depth is not enough.

update_wall_time+0x37f/0x8c0 -> update_xtime_cache (345 ns) (Overruns: 2838)
update_wall_time+0x384/0x8c0 -> clocksource_get_next (1141 ns) (Overruns: 2838)
do_timer+0x23/0x100 -> update_wall_time (3882 ns) (Overruns: 2838)
tick_do_update_jiffies64+0xbf/0x160 -> do_timer (5339 ns) (Overruns: 2838)
tick_sched_timer+0x6a/0xf0 -> tick_do_update_jiffies64 (7209 ns) (Overruns: 2838)
vgacon_set_cursor_size+0x98/0x120 -> native_io_delay (2613 ns) (Overruns: 274)
vgacon_cursor+0x16e/0x1d0 -> vgacon_set_cursor_size (33151 ns) (Overruns: 274)
set_cursor+0x5f/0x80 -> vgacon_cursor (36432 ns) (Overruns: 274)
con_flush_chars+0x34/0x40 -> set_cursor (38790 ns) (Overruns: 274)
release_console_sem+0x1ec/0x230 -> up (721 ns) (Overruns: 274)
release_console_sem+0x225/0x230 -> wake_up_klogd (316 ns) (Overruns: 274)
con_flush_chars+0x39/0x40 -> release_console_sem (2996 ns) (Overruns: 274)
con_write+0x22/0x30 -> con_flush_chars (46067 ns) (Overruns: 274)
n_tty_write+0x1cc/0x360 -> con_write (292670 ns) (Overruns: 274)
smp_apic_timer_interrupt+0x2a/0x90 -> native_apic_mem_write (330 ns) (Overruns: 274)
irq_enter+0x17/0x70 -> idle_cpu (413 ns) (Overruns: 274)
smp_apic_timer_interrupt+0x2f/0x90 -> irq_enter (1525 ns) (Overruns: 274)
ktime_get_ts+0x40/0x70 -> getnstimeofday (465 ns) (Overruns: 274)
ktime_get_ts+0x60/0x70 -> set_normalized_timespec (436 ns) (Overruns: 274)
ktime_get+0x16/0x30 -> ktime_get_ts (2501 ns) (Overruns: 274)
hrtimer_interrupt+0x77/0x1a0 -> ktime_get (3439 ns) (Overruns: 274)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch adds the support for dynamic tracing on the function return tracer.
The whole difference with normal dynamic function tracing is that we don't need
to hook on a particular callback. The only pro that we want is to nop or set
dynamically the calls to ftrace_caller (which is ftrace_return_caller here).

Some security checks ensure that we are not trying to launch dynamic tracing for
return tracing while normal function tracing is already running.

An example of trace with getnstimeofday set as a filter:

ktime_get_ts+0x22/0x50 -> getnstimeofday (2283 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1396 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1825 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1426 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1524 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1382 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1434 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1464 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1502 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1404 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1397 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1051 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1314 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1344 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1163 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1390 ns)
ktime_get_ts+0x22/0x50 -> getnstimeofday (1374 ns)
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix possible race condition in ftrace function return tracer

This fixes a possible race condition if index incrementation
is not immediately flushed in memory.

Thanks for Andi Kleen and Steven Rostedt for pointing out this issue
and give me this solution.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: allow archs more flexibility on dynamic ftrace implementations

Dynamic ftrace has largly been developed on x86. Since x86 does not
have the same limitations as other architectures, the ftrace interaction
between the generic code and the architecture specific code was not
flexible enough to handle some of the issues that other architectures
have.

Most notably, module trampolines. Due to the limited branch distance
that archs make in calling kernel core code from modules, the module
load code must create a trampoline to jump to what will make the
larger jump into core kernel code.

The problem arises when this happens to a call to mcount. Ftrace checks
all code before modifying it and makes sure the current code is what
it expects. Right now, there is not enough information to handle modifying
module trampolines.

This patch changes the API between generic dynamic ftrace code and
the arch dependent code. There is now two functions for modifying code:

  ftrace_make_nop(mod, rec, addr) - convert the code at rec->ip into
       a nop, where the original text is calling addr. (mod is the
       module struct if called by module init)

  ftrace_make_caller(rec, addr) - convert the code rec->ip that should
       be a nop into a caller to addr.

The record "rec" now has a new field called "arch" where the architecture
can add any special attributes to each call site record.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Optimize a bit the function return tracer

This patch changes the calling convention of prepare_ftrace_return to
pass its arguments by register. This will optimize it a bit and
prepare it to support dynamic tracing.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: remove spinlocks and irq disabling in function return tracer.

I've tried to figure out all of the race condition that could happen
when the tracer pushes or pops a return address trace to/from the
current thread_info.

Theory:

_ One thread can only execute on one cpu at a time. So this code
  doesn't need to be SMP-safe. Just drop the spinlock.

_ The only race could happen between the current thread and an
  interrupt. If an interrupt is raised, it will increase the index of
  the return stack storage and then execute until the end of the
  tracing to finally free the index it used. We don't need to disable
  irqs.

This is theorical. In practice, I've tested it with a two-core SMP and
had no problem at all. Perhaps -tip testing could confirm it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/ftrace.c: In function 'ftrace_return_to_handler':
 arch/x86/kernel/ftrace.c:112: error: implicit declaration of function 'cpu_clock'

cpu_clock() is implicitly included via a number of ways, but its real
location is sched.h. (Build failure is triggerable if enough other
kernel components are turned off.)
Signed-off-by: NIngo Molnar <mingo@elte.hu>

fix:

 arch/x86/kernel/ftrace.c: Assembler messages:
 arch/x86/kernel/ftrace.c:140: Error: missing ')'
 arch/x86/kernel/ftrace.c:140: Error: junk `(%ebp))' after expression
 arch/x86/kernel/ftrace.c:141: Error: missing ')'
 arch/x86/kernel/ftrace.c:141: Error: junk `(%ebp))' after expression

the [parent_replaced] is used in an =rm fashion, so that constraint
is correct in isolation - but [parent_old] aliases register %0 and uses
it in an addressing mode that is only valid with registers - so change
the constraint from =rm to =r.

This fixes the build failure.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add infrastructure for function-return tracing

Add low level support for ftrace return tracing.

This plug-in stores return addresses on the thread_info structure of
the current task.

The index of the current return address is initialized when the task
is the first one (init) and when a process forks (the child). It is
not needed when a task does a sys_execve because after this syscall,
it still needs to return on the kernel functions it called.

Note that the code of return_to_handler has been suggested by Steven
Rostedt as almost all of the ideas of improvements in this V3.

For purpose of security, arch/x86/kernel/process_32.c is not traced
because __switch_to() changes the current task during its execution.
That could cause inconsistency in the stored return address of this
function even if I didn't have any crash after testing with tracing on
this function enabled.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

This patch cleans up the NMI safe code for dynamic ftrace as suggested
by Andrew Morton.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add more debug info to /debugfs/tracing/dyn_ftrace_total_info

This patch adds dynamic ftrace NMI update statistics to the
/debugfs/tracing/dyn_ftrace_total_info stat file.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix crashes that can occur in NMI handlers, if their code is modified

Modifying code is something that needs special care. On SMP boxes,
if code that is being modified is also being executed on another CPU,
that CPU will have undefined results.

The dynamic ftrace uses kstop_machine to make the system act like a
uniprocessor system. But this does not address NMIs, that can still
run on other CPUs.

One approach to handle this is to make all code that are used by NMIs
not be traced. But NMIs can call notifiers that spread throughout the
kernel and this will be very hard to maintain, and the chance of missing
a function is very high.

The approach that this patch takes is to have the NMIs modify the code
if the modification is taking place. The way this works is that just
writing to code executing on another CPU is not harmful if what is
written is the same as what exists.

Two buffers are used: an IP buffer and a "code" buffer.

The steps that the patcher takes are:

 1) Put in the instruction pointer into the IP buffer
    and the new code into the "code" buffer.
 2) Set a flag that says we are modifying code
 3) Wait for any running NMIs to finish.
 4) Write the code
 5) clear the flag.
 6) Wait for any running NMIs to finish.

If an NMI is executed, it will also write the pending code.
Multiple writes are OK, because what is being written is the same.
Then the patcher must wait for all running NMIs to finish before
going to the next line that must be patched.

This is basically the RCU approach to code modification.

Thanks to Ingo Molnar for suggesting the idea, and to Arjan van de Ven
for his guidence on what is safe and what is not.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: avoid section mismatch warning, clean up

The dynamic ftrace determines which nop is safe to use at start up.
When it finds a safe nop for patching, it sets a pointer called ftrace_nop
to point to the code. All call sites are then patched to this nop.

Later, when tracing is turned on, this ftrace_nop variable is again used
to compare the location to make sure it is a nop before we update it to
an mcount call. If this fails just once, a warning is printed and ftrace
is disabled.

Rakib Mullick noted that the code that sets up the nop is a .init section
where as the nop itself is in the .text section. This is needed because
the nop is used later on after boot up. The problem is that the test of the
nop jumps back to the setup code and causes a "section mismatch" warning.

Rakib first recommended to convert the nop to .init.text, but as stated
above, this would fail since that text is used later.

The real solution is to extend Rabik's patch, and to make the ftrace_nop
into an array, and just save the code from the assembly to this array.

Now the section can stay as an init section, and we have a nop to use
later on.
Reported-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The entire file of ftrace.c in the arch code needs to be marked
as notrace. It is much cleaner to do this from the Makefile with
CFLAGS_REMOVE_ftrace.o.

[ powerpc already had this in its Makefile. ]
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The arch dependent function ftrace_mcount_set was only used by the daemon
start up code. This patch removes it.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Andrew Morton suggested using the proper API for reading and writing
kernel areas that might fault.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>