Create an rcu_dereference_check_mce() that checks for RCU-sched
read side and mce_read_mutex being held on update side.  Replace
uses of rcu_dereference() in arch/x86/kernel/cpu/mcheck/mce.c
with this new macro.
Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1267830207-9474-3-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit cebe1820 had an unnecessary,
wrong change: &mce_banks[i].attr is equivalent to the former
bank_attrs[i], not to mce_attrs[i].
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NAndi Kleen <andi@firstfloor.org>
LKML-Reference: <4B1E05CC.4040703f@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

mce_timer must be passed to setup_timer() in all cases, no
matter whether it is going to be actually used. Otherwise, when
the CPU gets brought down, its call to del_timer_sync() will
never return, as the timer won't have a base associated, and
hence lock_timer_base() will loop infinitely.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: <stable@kernel.org>
LKML-Reference: <4B1DB831.2030801@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Even it is in error path unlikely taken, add_timer_on() at
CPU_DOWN_FAILED* needs to be skipped if mce_timer is disabled.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: <stable@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The mce_disable_cpu() and mce_reenable_cpu() are called only
from mce_cpu_callback() which is marked as __cpuinit.
So these functions can be __cpuinit too.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4B0E3C4E.4090809@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The intel_init_thermal() is called from resume path, so it
cannot be marked as __init.

OTOH mce_banks_init() is only called from
__mcheck_cpu_cap_init() which is marked as __cpuinit, so it can
be also marked as __cpuinit.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Acked-by: NYong Wang <yong.y.wang@linux.intel.com>
LKML-Reference: <4AFBB0B8.2070501@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On platforms where the BIOS handles the thermal monitor interrupt,
APIC_LVTTHMR on each logical CPU is programmed to generate a SMI
and OS must not touch it.

Unfortunately AP bringup sequence using INIT-SIPI-SIPI clears all
the LVT entries except the mask bit. Essentially this results in
all LVT entries including the thermal monitoring interrupt set
to masked (clearing the bios programmed value for APIC_LVTTHMR).

And this leads to kernel take over the thermal monitoring
interrupt on AP's but not on BSP (leaving the bios programmed
value only on BSP).

As a result of this, we have seen system hangs when the thermal
monitoring interrupt is generated.

Fix this by reading the initial value of thermal LVT entry on
BSP and if bios has taken over the control, then program the
same value on all AP's and leave the thermal monitoring
interrupt control on all the logical cpu's to the bios.
Signed-off-by: NYong Wang <yong.y.wang@intel.com>
Reviewed-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091110013824.GA24940@ywang-moblin2.bj.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Cc: stable@kernel.org

Add an early initcall (pre SMP) which sets up global MCE
functionality.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1255689093-26921-2-git-send-email-borislav.petkov@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Prefix global/setup routines with "mcheck_" thus differentiating
from the internal facilities prefixed with "mce_". Also, prefix
the per cpu calls with mcheck_cpu and rename them to reflect the
MCE setup hierarchy of calls better.

There should be no functionality change resulting from this
patch.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <1255689093-26921-1-git-send-email-borislav.petkov@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The MCE initialization code explicitly says it doesn't handle
asymmetric configurations where different CPUs support different
numbers of MCE banks, and it prints a big warning in that case.

Therefore, printing the "mce: CPU supports <x> MCE banks"
message into the kernel log for every CPU is pure redundancy
that clutters the log significantly for systems with lots of
CPUs.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
LKML-Reference: <adaeip473qt.fsf@cisco.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This approach is the first baby step towards solving many of the
structural problems the x86 MCE logging code is having today:

 - It has a private ring-buffer implementation that has a number
   of limitations and has been historically fragile and buggy.

 - It is using a quirky /dev/mcelog ioctl driven ABI that is MCE
   specific. /dev/mcelog is not part of any larger logging
   framework and hence has remained on the fringes for many years.

 - The MCE logging code is still very unclean partly due to its ABI
   limitations. Fields are being reused for multiple purposes, and
   the whole message structure is limited and x86 specific to begin
   with.

All in one, the x86 tree would like to move away from this private
implementation of an event logging facility to a broader framework.

By using perf events we gain the following advantages:

 - Multiple user-space agents can access MCE events. We can have an
   mcelog daemon running but also a system-wide tracer capturing
   important events in flight-recorder mode.

 - Sampling support: the kernel and the user-space call-chain of MCE
   events can be stored and analyzed as well. This way actual patterns
   of bad behavior can be matched to precisely what kind of activity
   happened in the kernel (and/or in the app) around that moment in
   time.

 - Coupling with other hardware and software events: the PMU can track a
   number of other anomalies - monitoring software might chose to
   monitor those plus the MCE events as well - in one coherent stream of
   events.

 - Discovery of MCE sources - tracepoints are enumerated and tools can
   act upon the existence (or non-existence) of various channels of MCE
   information.

 - Filtering support: we just subscribe to and act upon the events we
   are interested in. Then even on a per event source basis there's
   in-kernel filter expressions available that can restrict the amount
   of data that hits the event channel.

 - Arbitrary deep per cpu buffering of events - we can buffer 32
   entries or we can buffer as much as we want, as long as we have
   the RAM.

 - An NMI-safe ring-buffer implementation - mappable to user-space.

 - Built-in support for timestamping of events, PID markers, CPU
   markers, etc.

 - A rich ABI accessible over system call interface. Per cpu, per task
   and per workload monitoring of MCE events can be done this way. The
   ABI itself has a nice, meaningful structure.

 - Extensible ABI: new fields can be added without breaking tooling.
   New tracepoints can be added as the hardware side evolves. There's
   various parsers that can be used.

 - Lots of scheduling/buffering/batching modes of operandi for MCE
   events. poll() support. mmap() support. read() support. You name it.

 - Rich tooling support: even without any MCE specific extensions added
   the 'perf' tool today offers various views of MCE data: perf report,
   perf stat, perf trace can all be used to view logged MCE events and
   perhaps correlate them to certain user-space usage patterns. But it
   can be used directly as well, for user-space agents and policy action
   in mcelog, etc.

With this we hope to achieve significant code cleanup and feature
improvements in the MCE code, and we hope to be able to drop the
/dev/mcelog facility in the end.

This patch is just a plain dumb dump of mce_log() records to
the tracepoints / perf events framework - a first proof of
concept step.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <4AD42A0D.7050104@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add an atomic notifier which ensures proper locking when conveying
MCE info to EDAC for decoding. The actual notifier call overrides a
default, negative priority notifier.

Note: make sure we register the default decoder only once since
mcheck_init() runs on each CPU.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20091003065752.GA8935@liondog.tnic>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make decoding of MCEs happen only on AMD hardware by registering a
non-default callback only on CPU families which support it.

While looking at the interaction of decode_mce() with the other MCE
code i also noticed a few other things and made the following
cleanups/fixes:

 - Fixed the mce_decode() weak alias - a weak alias is really not
   good here, it should be a proper callback. A weak alias will be
   overriden if a piece of code is built into the kernel - not
   good, obviously.

 - The patch initializes the callback on AMD family 10h and 11h.

 - Added the more correct fallback printk of:

	No support for human readable MCE decoding on this CPU type.
	Transcribe the message and run it through 'mcelog --ascii' to decode.

   On CPUs that dont have a decoder.

 - Made the surrounding code more readable.

Note that the callback allows us to have a default fallback -
without having to check the CPU versions during the printout
itself. When an EDAC module registers itself, it can install the
decode-print function.

(there's no unregister needed as this is core code.)

version -v2 by Borislav Petkov:

 - add K8 to the set of supported CPUs

 - always build in edac_mce_amd since we use an early_initcall now

 - fix checkpatch warnings
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <20091001141432.GA11410@aftab>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This reverts commit 22223c9b, as
requested by Andi Kleen:

  "Obviously kernels compiled with AMD support can still run on non AMD
   systems, so messages like this can never be removed at compile time."
Requsted-by: NAndi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use rdmsrl_safe() when accessing MCE registers. While in
theory we always 'know' which ones are safe to access from
the capability bits, there's a lot of hardware variations
and reality might differ from theory, as it did in this case:

   http://bugzilla.kernel.org/show_bug.cgi?id=14204

[    0.010016] mce: CPU supports 5 MCE banks
[    0.011029] general protection fault: 0000 [#1]
[    0.011998] last sysfs file:
[    0.011998] Modules linked in:
[    0.011998]
[    0.011998] Pid: 0, comm: swapper Not tainted (2.6.31_router #1) HP Vectra
[    0.011998] EIP: 0060:[<c100d9b9>] EFLAGS: 00010246 CPU: 0
[    0.011998] EIP is at mce_rdmsrl+0x19/0x60
[    0.011998] EAX: 00000000 EBX: 00000001 ECX: 00000407 EDX: 08000000
[    0.011998] ESI: 00000000 EDI: 8c000000 EBP: 00000405 ESP: c17d5eac

So WARN_ONCE() instead of crashing the box.

( also fix a number of stylistic inconsistencies in the code. )

Note, we might still crash in wrmsrl() if we get that far, but
we shouldnt if the registers are truly inaccessible.
Reported-by: NGNUtoo <GNUtoo@no-log.org>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <bug-14204-5438@http.bugzilla.kernel.org/>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now that decoding is done in-kernel, suppress mcelog message part.

CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

Move NB decoder along with required defines to EDAC MCE core. Add
registration routines for further decoding of the MCE info in the AMD64
EDAC module.

CC: Andi Kleen <andi@firstfloor.org>
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>

If MCE handler is called but none of mces_seen have machine
check event which might signal the MCE (i.e. event higher than
MCE_KEEP_SEVERITY), panic with "Machine check from unknown
source" will be taken since the MCE is assumed to be signaled
from external agent or so.

Usually mces_seen never point MCE_KEEP_SEVERITY event such as
CE. But it can happen because initial value of mces_seen is
accidentally modified by mce_no_way_out() - in case if
mce_no_way_out() run through all banks and the last bank has
the CE, mces_seen points the CE and the "panic by unknown" will
not be taken.

This patch fixes this undesired behavior, and clarifies the logic.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Dongming <jin.dongming@np.css.fujitsu.com>
LKML-Reference: <4A94E244.3020301@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Reported-by: NJin Dongming <jin.dongming@np.css.fujitsu.com>

An older test-box started hanging at the following point during
bootup:

 [    0.022996] Mount-cache hash table entries: 512
 [    0.024996] Initializing cgroup subsys debug
 [    0.025996] Initializing cgroup subsys cpuacct
 [    0.026995] Initializing cgroup subsys devices
 [    0.027995] Initializing cgroup subsys freezer
 [    0.028995] mce: CPU supports 5 MCE banks

I've bisected it down to commit 4efc0670 ("x86, mce: use 64bit
machine check code on 32bit"), which utilizes the MCE code on
32-bit systems too.

The problem is caused by this detail in my config:

  # CONFIG_CPU_SUP_INTEL is not set

This disables the quirks in mce_cpu_quirks() but still enables
MCE support - which then hangs due to the missing quirk
workaround needed on this CPU:

	if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0)
		mce_banks[0].init = 0;

The safe solution is to not initialize MCEs if we dont know on
what CPU we are running (or if that CPU's support code got
disabled in the config).

Also be a bit more defensive on 32-bit systems: dont do a
boot-time dump of pending MCEs not just on the specific system
that we found a problem with (Pentium-M), but earlier ones as
well.

Now this problem is probably not common and disabling CPU
support is rare - but still being more defensive in something
we turned on for a wide range of CPUs is prudent.

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: Message-ID: <4A88E3E4.40506@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold
boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog):

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 BANK 1 MCG status:
MCi status:
Error overflow
Uncorrected error
Error enabled
Processor context corrupt
MCA: Data CACHE Level-1 UNKNOWN Error
STATUS f200000000000195 MCGSTATUS 0

[ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error)
  and f200000000000115 (... READ Error).

  To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified
  the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump
  content of STATUS MSR before it is cleared during initialization. ]

Since the bogus MCE results in a kernel taint (which in turn disables
lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs
by default ("mce=bootlog" boot parameter can be be used to get the old
behavior).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If "fake panic" mode is turned on, just log panic message instead of
go real panic. This is used for testing only, so that the test suite
can check for the correct panic message and do regression testing for
MCE would go panic.

This patch is based on x86-tip.git/mce.

ChangeLog:

v5:

- Rebased on x86-tip.git/mce

v4:

- Move config file from sysfs to debugfs
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Because more debugfs files under mce dir will be create in mce.c.

ChangeLog:

v5:

- Rebased on x86-tip.git/mce
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

mce_cap_init() and mce_cpu_quirks() can be tagged with __cpuinit.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

"mce argument mce ignored. Please use /sys" message shouldn't
be printed when using "mce" boot option.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold
boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog):

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 BANK 1 MCG status:
MCi status:
Error overflow
Uncorrected error
Error enabled
Processor context corrupt
MCA: Data CACHE Level-1 UNKNOWN Error
STATUS f200000000000195 MCGSTATUS 0

[ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error)
  and f200000000000115 (... READ Error).

  To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified
  the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump
  content of STATUS MSR before it is cleared during initialization. ]

Since the bogus MCE results in a kernel taint (which in turn disables
lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs
by default ("mce=bootlog" boot parameter can be be used to get the old
behavior).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Fix the condition checking the result of strchr() (which previously
could result in an oops), and make the function return the number of
bytes actively used.

[ Impact: fix oops ]
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
LKML-Reference: <4A5F04B7020000780000AB59@vpn.id2.novell.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Instead of open coded calculations for bank MSRs hide the indexing of higher
banks MCE register MSRs in new macros.

No semantic changes.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This addresses one of the leftover review comments.

Move the per bank data into a single structure. This avoids
several separate variables and also separate allocation of sysfs objects.

I didn't move the CMCI ownership information so far because
that would have needed some non trivial changes in the algorithms.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Now that the X86_OLD_MCE ifdefs are gone move some code that
used to be outside the big ifdef to a more natural place
near its user.

No code change.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

As announced in feature-remove-schedule.txt remove CONFIG_X86_OLD_MCE

This patch only removes code.

The ancient machine check code for very old systems that are not supported
by CONFIG_X86_NEW_MCE is still kept.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Commit 5fd29d6c ("printk: clean up
handling of log-levels and newlines") changed printk semantics.  printk
lines with multiple KERN_<level> prefixes are no longer emitted as
before the patch.

<level> is now included in the output on each additional use.

Remove all uses of multiple KERN_<level>s in formats.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If CONFIG_NO_HZ + CONFIG_SMP, timer added via add_timer() might
be migrated on other cpu.  Use add_timer_on() instead.

Avoids the following failure:

Maciej Rutecki wrote:
> > After normal boot I try:
> >
> > echo 1 > /sys/devices/system/machinecheck/machinecheck0/check_interval
> >
> > I found this in dmesg:
> >
> > [  141.704025] ------------[ cut here ]------------
> > [  141.704039] WARNING: at arch/x86/kernel/cpu/mcheck/mce.c:1102
> > mcheck_timer+0xf5/0x100()
Reported-by: NMaciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Tested-by: NMaciej Rutecki <maciej.rutecki@gmail.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Percpu variable definition is about to be updated such that all percpu
symbols including the static ones must be unique.  Update percpu
variable definitions accordingly.

* as,cfq: rename ioc_count uniquely

* cpufreq: rename cpu_dbs_info uniquely

* xen: move nesting_count out of xen_evtchn_do_upcall() and rename it

* mm: move ratelimits out of balance_dirty_pages_ratelimited_nr() and
  rename it

* ipv4,6: rename cookie_scratch uniquely

* x86 perf_counter: rename prev_left to pmc_prev_left, irq_entry to
  pmc_irq_entry and nmi_entry to pmc_nmi_entry

* perf_counter: rename disable_count to perf_disable_count

* ftrace: rename test_event_disable to ftrace_test_event_disable

* kmemleak: rename test_pointer to kmemleak_test_pointer

* mce: rename next_interval to mce_next_interval

[ Impact: percpu usage cleanups, no duplicate static percpu var names ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: linux-mm <linux-mm@kvack.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andi Kleen <andi@firstfloor.org>

Use atomic_inc_return() instead of atomic_add_return() by 1.
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Don't skip removing mce_attrs in route from error2.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

We need a cleared cpu_mask to record if mce is initialized, especially
when MAXSMP is used.

used zalloc_... instead
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Reviewed-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

The sysfs attribute cmci_disabled was accidentall turned into a
duplicate of ignore_ce, breaking all other attributes.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Acked-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Vegard Nossum reported:

> I get an MCE-related crash like this in latest linus tree:
>
> [    0.115341] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [    0.116396] CPU: L2 Cache: 512K (64 bytes/line)
> [    0.120570] mce: CPU supports 0 MCE banks
> [    0.124870] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000010
> [    0.128001] IP: [<ffffffff813b98ad>] mcheck_init+0x278/0x320
> [    0.128001] PGD 0
> [    0.128001] Thread overran stack, or stack corrupted
> [    0.128001] Oops: 0002 [#1] PREEMPT SMP
> [    0.128001] last sysfs file:
> [    0.128001] CPU 0
> [    0.128001] Modules linked in:
> [    0.128001] Pid: 0, comm: swapper Not tainted 2.6.30 #426
> [    0.128001] RIP: 0010:[<ffffffff813b98ad>]  [<ffffffff813b98ad>] mcheck_init+0x278/0x320
> [    0.128001] RSP: 0018:ffffffff81595e38  EFLAGS: 00000246
> [    0.128001] RAX: 0000000000000010 RBX: ffffffff8158f900 RCX: 0000000000000000
> [    0.128001] RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000000000010
> [    0.128001] RBP: ffffffff81595e68 R08: 0000000000000001 R09: 0000000000000000
> [    0.128001] R10: 0000000000000010 R11: 0000000000000000 R12: 0000000000000000
> [    0.128001] R13: 00000000ffffffff R14: 0000000000000000 R15: 0000000000000000
> [    0.128001] FS:  0000000000000000(0000) GS:ffff880002288000(0000) knlGS:00000
> 00000000000
> [    0.128001] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> [    0.128001] CR2: 0000000000000010 CR3: 0000000001001000 CR4: 00000000000006b0
> [    0.128001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [    0.128001] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
> [    0.128001] Process swapper (pid: 0, threadinfo ffffffff81594000, task ffffff
> ff8152a4a0)
> [    0.128001] Stack:
> [    0.128001]  0000000081595e68 5aa50ed3b4ddbe6e ffffffff8158f900 ffffffff8158f
> 914
> [    0.128001]  ffffffff8158f948 0000000000000000 ffffffff81595eb8 ffffffff813b8
> 69c
> [    0.128001]  5aa50ed3b4ddbe6e 00000001078bfbfd 0000062300000800 5aa50ed3b4ddb
> e6e
> [    0.128001] Call Trace:
> [    0.128001]  [<ffffffff813b869c>] identify_cpu+0x331/0x392
> [    0.128001]  [<ffffffff815a1445>] identify_boot_cpu+0x23/0x6e
> [    0.128001]  [<ffffffff815a14ac>] check_bugs+0x1c/0x60
> [    0.128001]  [<ffffffff8159c075>] start_kernel+0x403/0x46e
> [    0.128001]  [<ffffffff8159b2ac>] x86_64_start_reservations+0xac/0xd5
> [    0.128001]  [<ffffffff8159b3ea>] x86_64_start_kernel+0x115/0x14b
> [    0.128001]  [<ffffffff8159b140>] ? early_idt_handler+0x0/0x71

This happens on QEMU which reports MCA capability, but no banks.
Without this patch there is a buffer overrun and boot ops because
the code would try to initialize the 0 element of a zero length
kmalloc() buffer.
Reported-by: NVegard Nossum <vegard.nossum@gmail.com>
Tested-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
LKML-Reference: <20090615125200.GD31969@one.firstfloor.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The mce_disabled on 32bit is a tristate variable [1,0,-1],
while 64bit version is boolean [0,1].
This patch makes mce_disabled always boolean, and use mce_p5_enabled
to indicate the third state instead.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

There are 2 headers:
	arch/x86/include/asm/mce.h
	arch/x86/kernel/cpu/mcheck/mce.h
and in the latter small header:
	#include <asm/mce.h>

This patch move all contents in the latter header into the former,
and fix all files using the latter to include the former instead.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>