- 05 11月, 2010 3 次提交
-
-
由 Sascha Hauer 提交于
We have two different transfer methods on i.MX: FIQ and DMA. Since the merge of the ASoC multicomponent support the DMA device is lost. Add it again. Also, imx_ssi_dai_probe has to be called for !AC97 aswell. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 10月, 2010 1 次提交
-
-
由 Mark Brown 提交于
While it is a generic serial port in practice the i.MX SSI is only supported in Linux as an audio port (the i.MX has dedicated SPI controllers and so on). This means we don't need to disambiguate against other uses of the hardware and so can drop the -dai suffix from the driver name which fixes merge issues with the i.MX tree in -next. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 23 8月, 2010 1 次提交
-
-
由 Sascha Hauer 提交于
In synchronous mode the SSI_SRCCR values are ignored. Instead SSI_STCCR must be used for both receiving and transmitting. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 12 8月, 2010 1 次提交
-
-
由 Liam Girdwood 提交于
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: NTimur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NJarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Reviewed-by: NJassi Brar <jassi.brar@samsung.com> Signed-off-by: NSeungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: NTimur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 06 8月, 2010 1 次提交
-
-
由 Eric Bénard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 20 7月, 2010 1 次提交
-
-
由 Eric Bénard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 7月, 2010 1 次提交
-
-
由 Uwe Kleine-König 提交于
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 18 7月, 2010 2 次提交
-
-
由 Kulikov Vasiliy 提交于
If kzalloc() fails we must exit with -ENOMEM. Also we must free allocated runtime->private_data on error as it would be lost on next call to snd_imx_open(). Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kulikov Vasiliy 提交于
If kzalloc() fails we must exit with -ENOMEM. Also we must free allocated runtime->private_data on error as it would be lost on next call to snd_imx_open(). Signed-off-by: NKulikov Vasiliy <segooon@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 6月, 2010 1 次提交
-
-
由 Eric Bénard 提交于
Signed-off-by: NEric Bénard <eric@eukrea.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 6月, 2010 1 次提交
-
-
由 Eric Bénard 提交于
* tdm slot has to be configured to get sound working on i.MX25 Signed-off-by: NEric Bénard <eric@eukrea.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 6月, 2010 2 次提交
-
-
由 Eric Bénard 提交于
Add the necessary files to support the TLV320AIC23B wired in I2S on our i.MX platforms. Signed-off-by: NEric Bénard <eric@eukrea.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Eric Bénard 提交于
* introduce 3 new flags to allow a more detailed configuration of the SSI link : IMX_SSI_NET : enable Network Mode IMX_SSI_SYN : enable Synchronous Mode IMX_SSI_USE_I2S_SLAVE : enable I2S Slave Mode * new platform can use these settings without breaking actual platforms. Signed-off-by: NEric Bénard <eric@eukrea.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 6月, 2010 2 次提交
-
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 26 5月, 2010 1 次提交
-
-
由 Stuart Longland 提交于
This updates the i.MX SSI driver to make it compatible with the ASoC tree following the move of DMA parameters from the DAI to the audio substream object. Signed-off-by: NStuart Longland <redhatter@gentoo.org> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
-
- 16 4月, 2010 1 次提交
-
-
由 Sascha Hauer 提交于
Doing so causes a deadlock, so just signal the timer to stop using an atomic variable. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 15 4月, 2010 1 次提交
-
-
由 Sascha Hauer 提交于
Currently the notification of elapsed periods is not very exact. Increase minimum periods to 4 as suggested by Liam Girdwood. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 08 4月, 2010 3 次提交
-
-
由 Sascha Hauer 提交于
Using a regular timer results in poll times < 1 jiffie with small buffers, so we loaded the timer with the actual jiffie value. We can be more accurate using a hrtimer. Also, we have to call snd_pcm_period_elapsed after playing period_bytes and not runtime->period_size (which is in samples and not in bytes). Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sascha Hauer 提交于
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Sascha Hauer 提交于
When checking if we are DMA capable we have to check for the IMX_SSI_DMA flag which is already set from platform_data instead of setting it again when we want to do DMA. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@Slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 06 4月, 2010 1 次提交
-
-
由 Daniel Mack 提交于
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. [Note that this is a backported version for 2.6.34. Upstream commit is fd23b7de] Signed-off-by: NDaniel Mack <daniel@caiaq.de> Reported-by: NSven Neumann <s.neumann@raumfeld.com> Reported-by: NMichael Hirsch <m.hirsch@raumfeld.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 23 3月, 2010 1 次提交
-
-
由 Mark Brown 提交于
Allow machines to control exactly when the bias is turned on and off. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 22 3月, 2010 1 次提交
-
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 20 3月, 2010 1 次提交
-
-
由 Daniel Mack 提交于
This fixes a memory corruption when ASoC devices are used in full-duplex mode. Specifically for pxa-ssp code, where this pointer is dynamically allocated for each direction and destroyed upon each stream start. All other platforms are fixed blindly, I couldn't even compile-test them. Sorry for any breakage I may have caused. Reported-by: NSven Neumann <s.neumann@raumfeld.com> Reported-by: NMichael Hirsch <m.hirsch@raumfeld.com> Signed-off-by: NDaniel Mack <daniel@caiaq.de> Acked-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com> Acked-by: NJarkko Nikula <jhnikula@gmail.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 3月, 2010 2 次提交
-
-
由 Mark Brown 提交于
Note that since all the microphones share a bias there is a single jack exported for all three, even though there are two physical connectors plus the soldered down silicon mic. Note also that the SiMic is always present by default. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 04 3月, 2010 1 次提交
-
-
由 Mark Brown 提交于
Initial support for audio using the 1133-EV1 audio and PMIC module for the i.MX31ADS. Currently only playback is supported, and the FIQ DMA driver has performance problems at higher sample rates which cause audible dropouts. This driver is based heavily on an out of tree one written by Liam Girdwood. Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 25 2月, 2010 2 次提交
-
-
由 Mark Brown 提交于
Currently the i.MX FIQ handler is reporting periods as elapsed based purely on a timer running in the CPU. This means that any clock mismatch between the CPU and the audio subsystem can result in the status reported to applications drifting away from the actual status of the hardware. This is particularly likely at present since the SSI driver is only capable of operating in slave mode so it's very likely that the interface will be clocked from a different source. Instead check the offset reported by the FIQ and only notify when we have transferred at least one period, re-firing the timer if we didn't do so. Also factor out the calculation of the timer expiry time for make it a bit easier to experiment with. Note that this only improves the situation, problems can still be triggered. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
-
- 10 2月, 2010 2 次提交
-
-
由 Paul Menzel 提交于
Signed-off-by: NPaul Menzel <paulepanter@users.sourceforge.net> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
This patch adds sound support for Phytec PhyCORE / PhyCARD modules in AC97 mode. Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 18 1月, 2010 1 次提交
-
-
由 Mark Brown 提交于
Currently they don't build due to cross tree dependencies, they will be reenabled once the arch/arm side has merged. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 17 1月, 2010 4 次提交
-
-
由 Mark Brown 提交于
This has been superceeded by Sascha's new driver but was not removed in the patch series due to cutdowns for review. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
The clocks for the SSI block need handling before this can work. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
While dynamically allocated DAIs are the way forward the core doesn't yet support anything except matching with a pointer to the actual DAI so convert to doing that so that machine drivers don't have to jump through hoops to register themselves. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJavier Martin <javier.martin@vista-silicon.com>
-
由 Mark Brown 提交于
Don't unconditionally include the i.MX2x DMA driver, the arch/arm functions it uses aren't available for i.MX3x. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: NJavier Martin <javier.martin@vista-silicon.com>
-