Kernel zero day testing warned about address space confusion.  A virtual
iomem address was used where a physical address is expected.  The
offending functions implement an optional part of the api, so they are
removed.  They can be added later, after testing.

Fixes: a1b36958Signed-off-by: NAllen Hubbe <Allen.Hubbe@emc.com>
Acked-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

The r592 driver relies on behavior of the DMA mapping API that is
normally observed but not guaranteed by the API.  Instead it uses a
runtime check to fail transfers if the API ever behaves

When CONFIG_NEED_SG_DMA_LENGTH is not set, one of the checks turns into a
comparison of a variable with itself, which gcc-6.0 now warns about:

drivers/memstick/host/r592.c: In function 'r592_transfer_fifo_dma':
drivers/memstick/host/r592.c:302:31: error: self-comparison always evaluates to false [-Werror=tautological-compare]
    (sg_dma_len(&dev->req->sg) < dev->req->sg.length)) {
                               ^

The check itself is not a problem, so this patch just rephrases the
condition in a way that gcc does not consider an indication of a mistake.
We already know that dev->req->sg.length was initially R592_LFIFO_SIZE, so
we can compare it to that constant again.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

INPUT_COMPAT_TEST became much simpler after commit f4056b52
("input: redefine INPUT_COMPAT_TEST as in_compat_syscall()") so we can
cleanly eliminate it altogether.
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The permissions of this file were modified by commit (f447671b PM /
AVS: rockchip-io: add io selectors and supplies for rk3399) by mistake,
so fix them.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Use KMEM_CACHE() instead of kmem_cache_create() to simplify the code.
Signed-off-by: NGeliang Tang <geliangtang@163.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Turn r_ops into a flexible array member to enable large, consisting of
up to 16 ops, OSD requests.  The use case is scattered writeback in
cephfs and, as far as the kernel client is concerned, 16 is just a made
up number.

r_ops had size 3 for copyup+hint+write, but copyup is really a special
case - it can only happen once.  ceph_osd_request_cache is therefore
stuffed with num_ops=2 requests, anything bigger than that is allocated
with kmalloc().  req_mempool is backed by ceph_osd_request_cache, which
means either num_ops=1 or num_ops=2 for use_mempool=true - all existing
users (ceph_writepages_start(), ceph_osdc_writepages()) are fine with
that.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This avoids defining large array of r_reply_op_{len,result} in
in struct ceph_osd_request.
Signed-off-by: NYan, Zheng <zyan@redhat.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This reverts commit e7223f18.

It causes problems when a ppdev tries to register before the parport
driver has been registered with the device model. That will trigger the

        BUG_ON(!drv->bus->p);

at drivers/base/driver.c:153. The call chain is

  kernel_init ->
    kernel_init_freeable ->
      do_one_initcall ->
        ppdev_init ->
          __parport_register_driver ->
            driver_register *BOOM*
Reported-by: Nkernel test robot <fengguang.wu@intel.com>
Reported-by: NRoss Zwisler <zwisler@gmail.com>
Reported-by: NPetr Mladek <pmladek@suse.com>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Handle the Oscillator Failure ('OF') bit from Oscillator Status register
(0x1D). This bit is cleared on set_time function and is read each time the
date/time is read, but only in case of XT Oscillator selection.
In RC mode, this bit is always set.
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The autocalibration is separated in two bits to set in Oscillator
Control register (0x1c) :
 - OSEL bit to select the oscillator type (XT or RC).
 - ACAL bit to select the autocalibration type.

These functionnalities are exported in sysfs entries : "oscillator"
and "autocalibration". Respectively, the values are "xtal" for XT
oscillator and "rc" for RC oscillator and 0 to disable the
autocalibration cycle, 512 for a 512 seconds autocalibration cycle
and 1024 for a cycle of 1024 seconds.

Examples :
Set to XT Oscillator
echo xtal > /sys/class/rtc/rtc0/device/oscillator
Activate an autocalibration every 512 seconds
echo 512 > /sys/class/rtc/rtc0/device/autocalibration
Signed-off-by: NMylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

The rv8803 has a 60µs window where it will not answer on the i2c bus.
It also means there will be no ack for the communication. Make sure
communication is tried multiple times when this happens (the i2c subsystem
mandates -ENXIO is that case but the number of retries is host specific).
The critical parts are the probe function and the alarm callback so make
sure we handle the failure there.

Cc: stable@vger.kernel.org # v4.4
Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>

Reorder the code in netvsc_sc_open(), so num_sc_offered is only decremented
after vmbus_open() is called. This avoid pontential race of removing device
before all channels are setup.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During the initialisation the driver uses a buffer on the stack for DMA.
That violates the cache coherency rules. The fix is to allocate the buffer
with kmalloc().
Signed-off-by: NOliver Neukum <ONeukum@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

The ati_remote2 driver expects at least two interfaces with one
endpoint each. If given malicious descriptor that specify one
interface or no endpoints, it will crash in the probe function.
Ensure there is at least two interfaces and one endpoint for each
interface before using it.

The full disclosure: http://seclists.org/bugtraq/2016/Mar/90Reported-by: NRalf Spenneberg <ralf@spenneberg.net>
Signed-off-by: NVladis Dronov <vdronov@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

This adds the necessary data for handling io voltage domains on the rk3399.
As interesting tidbit, the rk3399 contains two separate iodomain areas.
One in the regular General Register Files (GRF) and one in PMUGRF in the
pmu power domain.
Signed-off-by: NDavid Wu <david.wu@rock-chips.com>
Reviewed-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NKevin Hilman <khilman@baylibre.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Enables "Intel(R) Xeon Phi(TM) Processor x200 Product Family" support,
formerly code-named KNL. It is based on modified Intel Atom Silvermont
microarchitecture.
Signed-off-by: NDasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
[micah.barany@intel.com: adjusted values of residency and latency]
Signed-off-by: NMicah Barany <micah.barany@intel.com>
[hubert.chrzaniuk@intel.com: removed deprecated CPUIDLE_FLAG_TIME_VALID flag]
Signed-off-by: NHubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Signed-off-by: NPawel Karczewski <pawel.karczewski@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Some SKL-H configurations require "intel_idle.max_cstate=7" to boot.
While that is an effective workaround, it disables C10.

This patch detects the problematic configuration,
and disables C8 and C9, keeping C10 enabled.

Note that enabling SGX in BIOS SETUP can also prevent this issue,
if the system BIOS provides that option.

https://bugzilla.kernel.org/show_bug.cgi?id=109081
"Freezes with Intel i7 6700HQ (Skylake), unless intel_idle.max_cstate=7"
Signed-off-by: NLen Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org

The VRSS_CHANNEL_MAX is the max number of channels supported by Hyper-V
hosts. We use it for the related array sizes instead of using NR_CPUS,
which may be set to several thousands.
This patch reduces possible memory allocation failures.
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

struct netvsc_device is freed in rndis_filter_device_remove(). So we save
the nvdev->num_chn into a temp variable for later usage.

(Please also include this patch into stable branch.)
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let channels hold a reference on their network namespace.
Some channel types, like ppp_async and ppp_synctty, can have their
userspace controller running in a different namespace. Therefore they
can't rely on them to preclude their netns from being removed from
under them.

==================================================================
BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at
addr ffff880064e217e0
Read of size 8 by task syz-executor/11581
=============================================================================
BUG net_namespace (Not tainted): kasan: bad access detected
-----------------------------------------------------------------------------

Disabling lock debugging due to kernel taint
INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906
[<      none      >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440
[<      none      >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469
[<     inline     >] slab_alloc_node kernel/mm/slub.c:2532
[<     inline     >] slab_alloc kernel/mm/slub.c:2574
[<      none      >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579
[<     inline     >] kmem_cache_zalloc kernel/include/linux/slab.h:597
[<     inline     >] net_alloc kernel/net/core/net_namespace.c:325
[<      none      >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360
[<      none      >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95
[<      none      >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150
[<      none      >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451
[<     inline     >] copy_process kernel/kernel/fork.c:1274
[<      none      >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723
[<     inline     >] SYSC_clone kernel/kernel/fork.c:1832
[<      none      >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826
[<      none      >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185

INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631
[<      none      >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650
[<     inline     >] slab_free kernel/mm/slub.c:2805
[<      none      >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814
[<     inline     >] net_free kernel/net/core/net_namespace.c:341
[<      none      >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348
[<      none      >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448
[<      none      >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036
[<      none      >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170
[<      none      >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303
[<      none      >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468
INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000
flags=0x5fffc0000004080
INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200

CPU: 1 PID: 11581 Comm: syz-executor Tainted: G    B           4.4.0+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300
 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054
 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000
Call Trace:
 [<     inline     >] __dump_stack kernel/lib/dump_stack.c:15
 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50
 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654
 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661
 [<     inline     >] print_address_description kernel/mm/kasan/report.c:138
 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236
 [<     inline     >] kasan_report kernel/mm/kasan/report.c:259
 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280
 [<     inline     >] ? ppp_pernet kernel/include/linux/compiler.h:218
 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<     inline     >] ppp_pernet kernel/include/linux/compiler.h:218
 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<     inline     >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293
 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392
 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241
 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000
 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478
 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744
 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772
 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901
 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688
 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208
 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244
 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115
 [<     inline     >] exit_task_work kernel/include/linux/task_work.h:21
 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750
 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123
 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357
 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550
 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145
 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880
 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307
 [<     inline     >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113
 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158
 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712
 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655
 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165
 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692
 [<     inline     >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099
 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678
 [<     inline     >] ? context_switch kernel/kernel/sched/core.c:2807
 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283
 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247
 [<     inline     >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282
 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344
 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281
Memory state around the buggy address:
 ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Fixes: 273ec51d ("net: ppp_generic - introduce net-namespace functionality v2")
Reported-by: NBaozeng Ding <sploving1@gmail.com>
Signed-off-by: NGuillaume Nault <g.nault@alphalink.fr>
Reviewed-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

devm_ioremap_resource() returns ERR_PTR() value on error, it never
returns NULL, fix it and propagate the returned error upwards.

Fixes: 656e7052 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: NVladimir Zapolskiy <vz@mleia.com>
Reviewed-by: NMatthias Brugger <mbrugger@suse.com>
Acked-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This removes the dependency on GPIOLIB for non faulty PHYs.

Indeed, without this patch, if GPIOLIB is not selected
devm_gpiod_get_optional() will return -ENOSYS and the driver probe
call will fail, regardless of the actual PHY hardware.

Out of the 3 PHYs supported by this driver (AT8030, AT8031, AT8035),
only AT8030 presents the issues that commit 13a56b44 ("net: phy:
at803x: Add support for hardware reset") attempts to work-around by
using a 'reset' GPIO line.

Hence, only AT8030 should depend on GPIOLIB operating properly.

Fixes: 13a56b44 ("net: phy: at803x: Add support for hardware reset")
Signed-off-by: NSebastian Frias <sf84@laposte.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver of course "knows" that the chip's reset signal is active low,
so  it drives the GPIO to 0  to reset the PHY and to 1 otherwise; however
all this will only work iff the GPIO  is  specified as active-high in the
device tree!  I think both the driver and the device trees (if there are
any -- I was unable to find them) need to be fixed in this case...

Fixes: 13a56b44 ("net: phy: at803x: Add support for hardware reset")
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GPS rfkill support via pre-2009 WMI interface uses hp_wmi_get_sw_state()
and hp_wmi_get_hw_state() to query its current hard and soft block state,
respectively.

In hp_wmi_get_sw_state() a mask is calculated which bit should be checked
in an int value returned by firmware to get current block state: 0x200 <<
(r * 8) which with r being 3 for GPS results in overflow and mask of zero.
The same goes for hp_wmi_get_hw_state().

This effectively means that GPS rfkill on this WMI interface is considered
always both hard and soft blocked.

Unfortunately, later when rfkill subsystem calls hp_wmi_set_block() to sync
this block to hardware firmware at least on my old nc6400 gets confused and
sets both hard and soft blocks on WiFi and BT.

This happens for example on hp-wmi module load.

Since due to overflow described above it is dubious that this ever worked
correctly and HP laptops with modems having GPS support seem to all have
been released well past year 2009 let's just remove GPS rfkill support via
pre-2009 WMI interface.
Signed-off-by: NMaciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

rfkill registration order in hp_wmi_rfkill_setup() is:
1) WiFi,
2) BT,
3) WWAN,
5) GPS.

Unregistration when cleaning up on error return should happen in reverse
order.

This means that: If BT rfkill fails to be allocated we possibly need to
first unregister WiFi rfkill before destroying it.

The same goes with (WWAN, BT) and (GPS, WWAN) pairs.

Also, if WWAN rfkill fails to register we need to (possibly) unregister BT
not the GPS one.  And if GPS rfkill fails to register we need to unregister
WWAN not the BT one.

We never need to unregister GPS rfkill here since if GPS rfkill
registration succeeds this function returns without error so no cleanup is
necessary.
Signed-off-by: NMaciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Similarly to Dell Vostro V131, Dell Inspiron M5110 also requires an
SMBIOS request to be issued in order for WMI events to be generated and
does not raise an i8042 interrupt when the Dell Instant Launch hotkey is
pressed.  However, the event code for that hotkey on this machine is
0xe029, so add it to the legacy keymap.
Signed-off-by: NMichał Kępień <kernel@kempniu.pl>
Tested-by: NDarek Stojaczyk <darek.stojaczyk@gmail.com>
Reviewed-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

On models on which an SMBIOS request needs to be issued in order for WMI
events to be generated, pressing the Dell Instant Launch hotkey does not
raise an i8042 interrupt - only a WMI event is generated (0xe025 on Dell
Vostro V131).  As that WMI event is the only way the kernel will be
notified about pressing the Dell Instant Launch hotkey on such machines,
the relevant keymap entry has to be changed to a KE_KEY one.  However,
the same WMI event should still be ignored on machines which do not
require an SMBIOS request for enabling WMI, so filter it conditionally
in dell_wmi_process_key().
Signed-off-by: NMichał Kępień <kernel@kempniu.pl>
Reviewed-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

On some laptop models (e.g. Dell Vostro V131), WMI events are not
generated until a specific SMBIOS request is issued to register an event
listener [1].  As there seems to be no ACPI method or SMBIOS request to
determine without possible side effects whether a given machine needs to
issue this SMBIOS request in order to receive WMI events, DMI matching
is used to whitelist the models which need it.

[1] https://lists.us.dell.com/pipermail/libsmbios-devel/2015-July/000612.htmlSigned-off-by: NMichał Kępień <kernel@kempniu.pl>
Reviewed-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

As dell_smi_error() is exported by dell-smbios, its prefix should be
consistent with other exported symbols, so change function name to
dell_smbios_error().
Signed-off-by: NMichał Kępień <kernel@kempniu.pl>
Reviewed-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The dell_smi_error() method could be used by modules other than
dell-laptop for convenient translation of SMBIOS request errors into
errno values.  Thus, move it to dell-smbios.
Signed-off-by: NMichał Kępień <kernel@kempniu.pl>
Reviewed-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Some Lenovo ideapad models lack a physical rfkill switch.
On Lenovo models ideapad Y700 Touch-15ISK and ideapad Y700-15ISK,
ideapad-laptop would wrongly report all radios as blocked by
hardware which caused wireless network connections to fail.

Add these models without an rfkill switch to the no_hw_rfkill list.
Signed-off-by: NJohn Dahlstrom <jodarom@sdf.org>
Cc: <stable@vger.kernel.org> # 3.17.x-: 4fa9dabc: ideapad_laptop: Lenovo G50-30 fix rfkill reports wireless blocked
Cc: <stable@vger.kernel.org>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Lifebook E734/E744/E754 has a radio toggle button which uses code 0x420.
Map it to KEY_RFKILL.
Signed-off-by: NMichał Kępień <kernel@kempniu.pl>
Acked-by: NJonathan Woithe <jwoithe@just42.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

We want the size of the struct, not of a pointer to it. To be future
proof, just dereference the pointer to get the desired type.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The Kconfig currently controlling compilation of this code is:

drivers/platform/x86/Kconfig:config INTEL_SCU_IPC
drivers/platform/x86/Kconfig:   bool "Intel SCU IPC Support"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

We explicitly disallow a driver unbind, since that doesn't have a
sensible use case anyway, and it allows us to drop the ".remove"
code for non-modular drivers.

Since module_pci_driver() uses the same init level priority as
builtin_pci_driver() the init ordering remains unchanged with
this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We don't replace module.h with init.h since the file already has that.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

During legacy suspend flow, IPC1 commands are being requested
from opregion driver. But the PMC_IPC1 command will timeout as example:

[  281.444600] ipc_debug##: ipc_send_command: cmd=0x201ff,
[  281.444648] wbuf[0]=0x4ea6
[  281.444668] wbuf[1]=0x0
[  281.444674] wbuf[2]=0x0
[  281.444676] wbuf[3]=0x0
[  284.446467] pmc-ipc-plat INT34D2:00: IPC timed out, TS=0x4, CMD=0x200ff

This is because before the opregion driver could send IPC1 commands,
the PMC_IPC irq is already suspended. Which makes the IPC command to
timeout.

Solution: register pmc_ipc irq as IRQF_NO_SUSPEND
Signed-off-by: NAnanth Krishna R <ananth.krishna.r@intel.com>
Signed-off-by: NBharath K Veera <bharath.k.veera@intel.com>
Signed-off-by: NQipeng Zha <qipeng.zha@intel.com>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

GCR register (pmc_cfg register) is at offset 0x1008, and
remapping of 0x4 bytes is enough.
Signed-off-by: NFrancois-Nicolas Muller <francois-nicolas.muller@intel.com>
Signed-off-by: NQipeng Zha <qipeng.zha@intel.com>
Acked-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Wi-Fi on ASUS X75VD laptop does not work unless asus_nb_wmi module
is loaded with wapf=4 option. Add quirk for this.
Signed-off-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Due to a recent fix in the firmware, the Punit verbosity control bits
now adhere to the correct pattern. Hence remove the workaround and
do a read-modify-write of the register.
Signed-off-by: NSouvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

On the XPS 13 9350, the dell-rbtn mechanism has a new device id, and
the DSDT turns it off if a new enough _OSI is supported.  Add a
comment about why we don't bother supporting it.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The XPS 13 9350 sends WMI keypress events that aren't enumerated in
the DMI table.  Add a table listing them.  To avoid breaking things
that worked before, these un-enumerated hotkeys won't be used if the
DMI table maps them to something else.

FWIW, it appears that the DMI table may be a legacy thing and we
might want to rethink how we handle events in general.  As an
example, a whole lot of things map to KEY_PROG3 via the DMI table.

This doesn't send keypress events for any of the new events.  They
appear to all be handled by other means (keyboard illumination is
handled automatically and rfkill is handled by intel-hid).
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Acked-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>