- 21 4月, 2012 13 次提交
-
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/um/checksum_32.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Cc: Richard Weinberger <richard@nod.at> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/lib/usercopy_32.c, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/lib/putuser.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/lib/getuser.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/lib/csum-copy_64.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/lib/copy_user_nocache_64.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/lib/copy_user_64.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/lib/checksum_32.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/kernel/test_rodata.c, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/kernel/entry_64.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/kernel/entry_32.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Remove open-coded exception table entries in arch/x86/ia32/ia32entry.S, and replace them with _ASM_EXTABLE() macros; this will allow us to change the format and type of the exception table entries. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
由 H. Peter Anvin 提交于
Instead of using .section ... .previous, use .pushsection ... .popsection; this is (hopefully) a bit more robust, especially in complex assembly code. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: David Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/CA%2B55aFyijf43qSu3N9nWHEBwaGbb7T2Oq9A=9EyR=Jtyqfq_cQ@mail.gmail.com
-
- 20 4月, 2012 12 次提交
-
-
由 H. Peter Anvin 提交于
This reverts commit ce37defc "x86: Document rdmsr_safe restrictions", as these restrictions no longer apply. Reported-by: NBorislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/20120419171609.GH3221@aftab.osrc.amd.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 H. Peter Anvin 提交于
If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. This patch changes the early IDT setup to look a lot more like x86-64: we now install handlers for all 32 exception vectors. The output of the early exception handler has changed somewhat as it directly reflects the stack frame of the exception handler, and the stack frame has been somewhat restructured. Finally, centralize the code that can and should be run only once. [ v2: Use early_fixup_exception() instead of linear search ] Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1334794610-5546-6-git-send-email-hpa@zytor.com
-
由 H. Peter Anvin 提交于
If we get an exception during early boot, walk the exception table to see if we should intercept it. The main use case for this is to allow rdmsr_safe()/wrmsr_safe() during CPU initialization. Since the exception table is currently sorted at runtime, and fairly late in startup, this code walks the exception table linearly. We obviously don't need to worry about modules, however: none have been loaded at this point. [ v2: Use early_fixup_exception() instead of linear search ] Link: http://lkml.kernel.org/r/1334794610-5546-5-git-send-email-hpa@zytor.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 H. Peter Anvin 提交于
Add a restricted version of fixup_exception() to be used during early boot only. In particular, this doesn't support the try..catch variant since we may not have a thread_info set up yet. This relies on the exception table being sorted already at build time. Link: http://lkml.kernel.org/r/1334794610-5546-1-git-send-email-hpa@zytor.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 H. Peter Anvin 提交于
GET_CR2_INTO_RCX is asinine: it is only used in one place, the actual paravirt call returns the value in %rax, not %rcx; and the one place that wants it wants the result in %r9. We actually generate as a result of this call: call ... movq %rax, %rcx xorq %rax, %rax /* this value isn't even used... */ movq %rcx, %r9 At least make the macro do what the paravirt call does, which is put the value into %rax. Nevermind the fact that the macro clobbers all the volatile registers. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1334794610-5546-4-git-send-email-hpa@zytor.com Cc: Glauber de Oliveira Costa <glommer@parallels.com>
-
由 H. Peter Anvin 提交于
Add a symbolic constant for the bitmask which states which exceptions carry an error code. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1334794610-5546-3-git-send-email-hpa@zytor.com
-
由 H. Peter Anvin 提交于
Make the ASM_NOP* macros work in actual assembly files. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1334794610-5546-2-git-send-email-hpa@zytor.com
-
由 David Daney 提交于
We can sort the exeception table at build time for x86, so let's do it. Signed-off-by: NDavid Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/1334872799-14589-6-git-send-email-ddaney.cavm@gmail.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 David Daney 提交于
We can sort the exeception table at build time for MIPS, so let's do it. Signed-off-by: NDavid Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/1334872799-14589-5-git-send-email-ddaney.cavm@gmail.comAcked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 David Daney 提交于
Define a config variable BUILDTIME_EXTABLE_SORT to control build time sorting of the kernel's exception table. Patch Makefile to do the sorting when BUILDTIME_EXTABLE_SORT is selected. Signed-off-by: NDavid Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/1334872799-14589-4-git-send-email-ddaney.cavm@gmail.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 David Daney 提交于
If the build program sortextable has already sorted the exception table, don't sort it again. Signed-off-by: NDavid Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/1334872799-14589-3-git-send-email-ddaney.cavm@gmail.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
由 David Daney 提交于
Using this build-time sort saves time booting as we don't have to burn cycles sorting the exception table. Signed-off-by: NDavid Daney <david.daney@cavium.com> Link: http://lkml.kernel.org/r/1334872799-14589-2-git-send-email-ddaney.cavm@gmail.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 16 4月, 2012 11 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Nothing too disasterous, the biggest thing being the removal of the regulator support for vcore in the AMBA driver; only one SoC was using this and it got broken during the last merge window, which then started causing problems for other people. Mutual agreement was reached for it to be removed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7386/1: jump_label: fixup for rename to static_key ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus ARM: 7383/1: nommu: populate vectors page from paging_init ARM: 7381/1: nommu: fix typo in mm/Kconfig ARM: 7380/1: DT: do not add a zero-sized memory property ARM: 7379/1: DT: fix atags_to_fdt() second call site ARM: 7366/3: amba: Remove AMBA level regulator support ARM: 7377/1: vic: re-read status register before dispatching each IRQ handler ARM: 7368/1: fault.c: correct how the tsk->[maj|min]_flt gets incremented
-
由 Linus Torvalds 提交于
The 'max' range needs to be unsigned, since the size of the user address space is bigger than 2GB. We know that 'count' is positive in 'long' (that is checked in the caller), so we will truncate 'max' down to something that fits in a signed long, but before we actually do that, that comparison needs to be done in unsigned. Bug introduced in commit 92ae03f2 ("x86: merge 32/64-bit versions of 'strncpy_from_user()' and speed it up"). On x86-64 you can't trigger this, since the user address space is much smaller than 63 bits, and on x86-32 it works in practice, since you would seldom hit the strncpy limits anyway. I had actually tested the corner-cases, I had only tested them on x86-64. Besides, I had only worried about the case of a pointer *close* to the end of the address space, rather than really far away from it ;) This also changes the "we hit the user-specified maximum" to return 'res', for the trivial reason that gcc seems to generate better code that way. 'res' and 'count' are the same in that case, so it really doesn't matter which one we return. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rabin Vincent 提交于
c5905afb ("static keys: Introduce 'struct static_key'...") renamed struct jump_label_key to struct static_key. Fixup ARM for this to eliminate these build warnings: include/linux/jump_label.h:113:2: warning: passing argument 1 of 'arch_static_branch' from incompatible pointer type include/asm/jump_label.h:17:82: note: expected 'struct jump_label_key *' but argument is of type 'struct static_key *' Signed-off-by: NRabin Vincent <rabin@rab.in> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Jonathan Austin 提交于
Currently when ThumbEE is not enabled (!CONFIG_ARM_THUMBEE) the ThumbEE register states are not saved/restored at context switch. The default state of the ThumbEE Ctrl register (TEECR) allows userspace accesses to the ThumbEE Base Handler register (TEEHBR). This can cause unexpected behaviour when people use ThumbEE on !CONFIG_ARM_THUMBEE kernels, as well as allowing covert communication - eg between userspace tasks running inside chroot jails. This patch sets up TEECR in order to prevent user-space access to TEEHBR when !CONFIG_ARM_THUMBEE. In this case, tasks are sent SIGILL if they try to access TEEHBR. Cc: stable@vger.kernel.org Reviewed-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NJonathan Austin <jonathan.austin@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
If a bank of memory spanning the 4GB boundary is added on a !CONFIG_LPAE kernel then we will hang early during boot since the memory bank will have wrapped around to zero. This patch truncates memory banks for !LPAE configurations when the end address is not representable in 32 bits. Acked-by: NNicolas Pitre <nico@linaro.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Walleij 提交于
During booting of cpu1, there is a short window where cpu1 is online, but not active where cpu1 is occupied by waiting to become active. If cpu0 then decides to schedule something on cpu1 and wait for it to complete, before cpu0 has set cpu1 active, we have a deadlock. Typically it's this CPU frequency transition that happens at this time, so let's just not wait for it to happen, it will happen whenever the CPU eventually comes online instead. Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@kernel.org Signed-off-by: NJonas Aaberg <jonas.aberg@stericsson.com> Reviewed-by: NRickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rafael J. Wysocki 提交于
Commit 26f41062 ("PCI: check for pci bar restore completion and retry") attempted to address problems with PCI BAR restoration on systems where FLR had not been completed before pci_restore_state() was called, but it did that in an utterly wrong way. First off, instead of retrying the writes for the BAR registers only, it did that for all of the PCI config space of the device, including the status register (whose value after the write quite obviously need not be the same as the written one). Second, it added arbitrary delay to pci_restore_state() even for systems where the PCI config space restoration was successful at first attempt. Finally, the mdelay(10) it added to every iteration of the writing loop was way too much of a delay for any reasonable device. All of this actually caused resume failures for some devices on Mikko's system. To fix the regression, make pci_restore_state() only retry the writes for BAR registers and only wait if the first read from the register doesn't return the written value. Additionaly, make it wait for 1 ms, instead of 10 ms, after every failing attempt to write into config space. Reported-by: NMikko Vinni <mmvinni@yahoo.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull "ARM: a few more SoC fixes for 3.4-rc" from Olof Johansson: - A handful of warning and build fixes for Qualcomm MSM - Build/warning and bug fixes for Samsung Exynos - A fix from Rob Herring that removes misplaced interrupt-parent properties from a few device trees - A fix to OMAP dealing with cpufreq build errors, removing some of the offending code since it was redundant anyway * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errors ARM: dts: remove blank interrupt-parent properties ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files ARM: EXYNOS: Remove broken config values for touchscren for NURI board ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards ARM: EXYNOS: fix regulator name for NURI board ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL ARM: msm: Fix section mismatches in proc_comm.c video: msm: Fix section mismatches in mddi.c arm: msm: trout: fix compile failure arm: msm: halibut: remove unneeded fixup ARM: EXYNOS: Add PDMA and MDMA physical base address defines ARM: S5PV210: Fix compiler warning in dma.c file ARM: EXYNOS: Fix compile error in exynos5250-cpufreq.c ARM: EXYNOS: Add missing definition for IRQ_I2S0 ARM: S5PV210: fix unused LDO supply field from wm8994_pdata
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull another round of sound fixes from Takashi Iwai: "A few regression fixes for Realtek HD-audio codecs, mainly specific to some laptop models." * tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix mem leak (and rid us of trailing whitespace). ALSA: hda/realtek - Add quirk for Mac Pro 5,1 machines ALSA: hda/realtek - Add a fixup entry for Acer Aspire 8940G ALSA: hda/realtek - Fix GPIO1 setup for Acer Aspire 4930 & co ALSA: hda/realtek - Add a few ALC882 model strings back
-
由 Martin K. Petersen 提交于
Commit 18a4d0a2 ("[SCSI] Handle disk devices which can not process medium access commands") introduced a bug in which we would attempt to dereference the scsi driver even when the device had no ULD attached. Ensure that a driver is registered and make the driver accessor function more resilient to errors during device discovery. Reported-by: NElric Fu <elricfu1@gmail.com> Reported-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 4月, 2012 4 次提交
-
-
由 Olof Johansson 提交于
Merge branch 'v3.4-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.4-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files ARM: EXYNOS: Remove broken config values for touchscren for NURI board ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards ARM: EXYNOS: fix regulator name for NURI board ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL ARM: EXYNOS: Add PDMA and MDMA physical base address defines ARM: S5PV210: Fix compiler warning in dma.c file ARM: EXYNOS: Fix compile error in exynos5250-cpufreq.c ARM: EXYNOS: Add missing definition for IRQ_I2S0 ARM: S5PV210: fix unused LDO supply field from wm8994_pdata
-
由 Kevin Hilman 提交于
Now that we have OPP layer, and OMAP CPUfreq driver is using it, we no longer need/use the clock framework code for filling up CPUfreq tables. Remove it. Removing this code also eliminates build errors when CPU_FREQ_TABLE support is not enabled. Thanks to Russell King for pointing out the parts I missed under plat-omap in the original version and also pointing out the build errors when CPUFREQ_TABLE support was not enabled. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NKevin Hilman <khilman@ti.com> Acked-by: NPaul Walmsley <paul@pwsan.com> Acked-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
由 Rob Herring 提交于
These were incorrectly introduced and can cause problems for of_irq_init. The correct way to define a root controller is no interrupt-parent set at all or the interrupt-parent is set to the root controller itself when inherited from a parent node. Signed-off-by: NRob Herring <rob.herring@calxeda.com> Tested-by: NLee Jones <lee.jones@linaro.org> Signed-off-by: NOlof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm由 Olof Johansson 提交于
From David Brown: "Here are some fixes for msm that fix problems caused by the latest ARM code. The ones from Daniel remove unneeded fixups that now cause compilation failures. Mine fix section mismatches, that were incompletely fixed earlier." * 'msm-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Fix section mismatches in proc_comm.c video: msm: Fix section mismatches in mddi.c arm: msm: trout: fix compile failure arm: msm: halibut: remove unneeded fixup
-