Under heavy target nvme load duration, the lpfc irq handler is
encountering cpu lockup warnings.

Convert the driver to a shortened ISR handler which identifies the
interrupting condition then schedules a workq thread to process the
completion queue the interrupt was for. This moves all the real work
into the workq element.

As nvmet_fc upcalls are no longer in ISR context, don't set the feature
flags
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Need to make ktime samples more accurate

If ktime is turned on in the middle of an IO, the max calculation could
be misleading. Base sampling on the start time of the IO as opposed to
ktime_on.

Make ISR ktime timestamps be from when CQE is read instead of EQE.
Added additional sanity checks when deciding whether to accept an IO
sample or not.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Local Reject/Invalid RPI errors seen during discovery.

Temporary RPI cleanup was occurring regardless of SLI rev. It's only
necessary on SLI-4.

Adjust the test for whether cleanup is necessary.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Warning messages when NVME_TARGET_FC not defined on ppc builds

The lpfc_nvmet_replenish_context() function is only meaningful when NVME
target mode enabled. Surround the function body with ifdefs for target
mode enablement.
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In a link bounce scenario, a condition can occur where the discovery
engine swaps an ndlp structure (address change for an nport). While the
swap was successfully executed by the discovery engine, the driver did
not properly detect a change in the ndlp bound to the nvme rport.  This
error resulted in the nvme host transport issuing an IO to the correct
nvme rport, but the lpfc driver addressed a ndlp with an NLP_UNUSED
status and failed the io. This resulting it it looking like there were
missing namespaces and applications failed due to io errors.

To fix, in lpfc_nvme_register_rport, rework the "rebind" case to break
the nvme rport<->ndlp association when the ndlp already has an
nrport. Then rebind the rport to the correct ndlp data and backpointers.

[mkp: typo]
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The driver crashes when attempting to use a freed ndpl pointer.

The pci_remove_one handler runs on a separate kernel thread. The order
of the removal is starting by freeing all of the ndlps and then
disabling interrupts. In between these two events the driver can still
receive an ELS and process it. When it tries to use the ndlp pointer
will be NULL

Change the order of the pci_remove_one vs disable interrupts so that
interrupts are disabled before the ndlp's are freed.

Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During pci hot plug, the kernel crashes in a list_add_call

The lookup by tag function will return null if the IOCB is out of range
or does not have the on txcmplq flag set.

Fix: Check for null return from lookup by tag.

Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

During pci hot plug, the kernel crashes in timer management code.

The sli4 remove_one handler is not stoping the timers as it starts to
remove the port so that it can be swapped.

Fix: Stop the timers early in the handler routine.

Note: Fix in SLI-4 only. SLI-3 already stopped the timers properly.

Cc: <stable@vger.kernel.org> # 4.12+
Signed-off-by: NDick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: NJames Smart <james.smart@broadcom.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reviewed-by: NGerry Morong <gerry.morong@microsemi.com>
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Fix a small cosmetic bug in a very rarely encountered error message that
can occur when a LD has a corrupted raid map.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the driver's PCI IDs.
Reviewed-by: NScott Benesh <scott.benesh@microsemi.com>
Reviewed-by: NScott Teel <scott.teel@microsemi.com>
Reviewed-by: NTomas Henzl <thenzl@redhat.com>
Signed-off-by: NKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: NDon Brace <don.brace@microsemi.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Remove unused variable sas_ha to clean up build warning
"unused variable  sas_ha  [-Wunused-variable]"

Fixes: 042ebd29 ("scsi: libsas: kill useless ha_event and do some cleanup")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since the command type of UTRD in UFS 2.1 specification is the same with
UFS 2.0. And it assumes the future UFS specification will follow the
same definition.
Signed-off-by: Nkehuanlin <kehuanlin@pinecone.net>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Several configurable fields of the Device Descriptor and the Unit
Descriptors determine the Boot LUN status. The bBootEnable field and the
bBootLunEn attribute is set to zero by default, so the Boot LUN is
disabled by default.

At which point the scsi device add for Boot LUN will fail, but we can
continue to use the ufs device in fact. This failure shouldn't abort the
device boot.
Signed-off-by: NHuanlin Ke <kehuanlin@pinecone.net>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NZang Leigang <zangleigang@hisilicon.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Signed-off-by: NZang Leigang <zangleigang@hisilicon.com>
Reviewed-by: NSubhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Since right after the user copy, we are going to memset(&karg, 0,
sizeof(karg)), the copy_from_user is redundant
Signed-off-by: NMeng Xu <mengxu.gatech@gmail.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0.
Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci"
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NHimanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Use *_pool_zalloc rather than *_pool_alloc followed by memset with 0.
Found by coccinelle spatch "api/alloc/pool_zalloc-simple.cocci"
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Device handlers are optional, and for some handlers like ALUA only
implemented for certain device types.  So suppress any errors for
unsupported devices.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Rather than having each device handler implementing their own error
mapping, have the ->attach() call return a SCSI_DH_XXX error code and
implement the mapping in scsi_dh_handler_attach().
Suggested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Reporting a maximum number of blocks that is not aligned on the device
physical size would cause a large write same request to be split into
physically unaligned chunks by __blkdev_issue_write_zeroes() and
__blkdev_issue_write_same(), even if the caller of these functions took
care to align its request to physical sectors.

Make sure the maximum reported is aligned to the device physical block
size. This is only an optional optimization for regular disks, but this
is mandatory to avoid failure of large write same requests directed at
sequential write required zones of host-managed ZBC disks.

[mkp: tweaked commit message]
Signed-off-by: NDamien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Set PCIe relaxed ordering bits in FW_IQ_CMD if relaxed ordering is
enabled in the PCIe device.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

csk is always null on the error return path and so the non-null check
and call to cxgbi_sock_closed on csk is redundant and can be removed.

Detected by: CoverityScan CID#114329 ("Logically dead code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Events will be added to defer_q list when setting ha->status to
SAS_HA_DRAINING. Events will be called after drain workqueue.

Those events are added to the head of list, but they are scanned one by
one from the head to the tail, which will cause those events be called
in the reverse order of being added. So change list_add to list_add_tail
in function sas_queue_work.
Signed-off-by: Nchenxiang <chenxiang66@hisilicon.com>
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Rename function notify_port_event() to sas_notify_port_event(), which
will be consistent with sas_notify_phy_event().
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

No one uses the port_gone_completion in struct asd_sas_port and
DISCE_PORT_GONE in enum disover_event, clean them out.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Numbering for each event enum makes no sense. Remove the numbering so
that we don't have to calculate the number by hand every time.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
CC: John Garry <john.garry@huawei.com>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The ha_event now has only one event HAE_RESET, and this event does
nothing. Kill it and do some cleanup.

This is a preparation for enhance libsas hotplug feature in the next
patches.
Signed-off-by: NJason Yan <yanaijie@huawei.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
CC: Johannes Thumshirn <jthumshirn@suse.de>
CC: Ewan Milne <emilne@redhat.com>
CC: Christoph Hellwig <hch@lst.de>
CC: Tomas Henzl <thenzl@redhat.com>
CC: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When a NETDEV_UNREGISTER notification is received the network device is
_deleted_ after the callback returns.  So we cannot use a workqueue
here, as this would cause an inversion when removing the device as the
netdev is already gone.  This manifests with a nasty warning during
shutdown:

sysfs group ffffffff81eff0e0 not found for kobject 'fc_host7'

So open-code fcoe_destroy_work() when receiving the notification to
avoid this inversion.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Acked-by: NJohannes Thumshirn <jth@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Separate out fcoe_vport_remove() from fcoe_destroy_work().  Required for
the next patch.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Acked-by: NJohannes Thumshirn <jth@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This closes a possible race condition in _fcoe_create() where we drop
the rtnl_lock() before calling fcoe_interface_remove().
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Acked-by: NJohannes Thumshirn <jth@kernel.org>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Don't populate const arrays on the stack, instead make them static.
Makes the object code smaller by over 740 bytes.

Before:
   text	   data	    bss	    dec	    hex	filename
   3840	    208	      0	   4048	    fd0	drivers/scsi/ufs/tc-dwc-g210.o

After:
   text	   data	    bss	    dec	    hex	filename
   2679	    624	      0	   3303	    ce7	drivers/scsi/ufs/tc-dwc-g210.o
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NBart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Pointers bnx2i_cmd are set but never used, so they can be removed.
Signed-off-by: NChristos Gkekas <chris.gekas@gmail.com>
Acked-by: NManish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The pointer eqe is always non-null inside the while loop, so the check
to see if eqe is NULL is redudant and hence can be removed.

Detected by CoverityScan CID#1248693 ("Logically Dead Code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NJames Smart <james.smart@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Another merge window, another MAINTAINERS file disaster.

People have serious problems with the alphabet and sorting, and poor
Jérôme Glisse and Radim Krčmář get their names mangled by locale issues,
turning them into some mangled mess (probably others do too, but those
two stood out when sorting things again).

And we now have two copies of the same 'AS3645A LED FLASH CONTROLLER
DRIVER' in the tree and in the MAINTAINERS file, but that's a separate
issue - the duplication is real, and I left them as two entries for the
same name.

This does not try to sort the actual section pattern entries, although I
may end up doing that later.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull clk updates from Stephen Boyd:
 "The diff is dominated by the Allwinner A10/A20 SoCs getting converted
  to the sunxi-ng framework. Otherwise, the heavy hitters are various
  drivers for SoCs like AT91, Amlogic, Renesas, and Rockchip. There are
  some other new clk drivers in here too but overall this is just a
  bunch of clk drivers for various different pieces of hardware and a
  collection of non-critical fixes for clk drivers.

  New Drivers:
   - Allwinner R40 SoCs
   - Renesas R-Car Gen3 USB 2.0 clock selector PHY
   - Atmel AT91 audio PLL
   - Uniphier PXs3 SoCs
   - ARC HSDK Board PLLs
   - AXS10X Board PLLs
   - STMicroelectronics STM32H743 SoCs

  Removed Drivers:
   - Non-compiling mb86s7x support

  Updates:
   - Allwinner A10/A20 SoCs converted to sunxi-ng framework
   - Allwinner H3 CPU clk fixes
   - Renesas R-Car D3 SoC
   - Renesas V2H and M3-W modules
   - Samsung Exynos5420/5422/5800 audio fixes
   - Rockchip fractional clk approximation fixes
   - Rockchip rk3126 SoC support within the rk3128 driver
   - Amlogic gxbb CEC32 and sd_emmc clks
   - Amlogic meson8b reset controller support
   - IDT VersaClock 5P49V5925/5P49V6901 support
   - Qualcomm MSM8996 SMMU clks
   - Various 'const' applications for struct clk_ops
   - si5351 PLL reset bugfix
   - Uniphier audio on LD11/LD20 and ethernet support on LD11/LD20/Pro4/PXs2
   - Assorted Tegra clk driver fixes"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (120 commits)
  clk: si5351: fix PLL reset
  ASoC: atmel-classd: remove aclk clock
  ASoC: atmel-classd: remove aclk clock from DT binding
  clk: at91: clk-generated: make gclk determine audio_pll rate
  clk: at91: clk-generated: create function to find best_diff
  clk: at91: add audio pll clock drivers
  dt-bindings: clk: at91: add audio plls to the compatible list
  clk: at91: clk-generated: remove useless divisor loop
  clk: mb86s7x: Drop non-building driver
  clk: ti: check for null return in strrchr to avoid null dereferencing
  clk: Don't write error code into divider register
  clk: uniphier: add video input subsystem clock
  clk: uniphier: add audio system clock
  clk: stm32h7: Add stm32h743 clock driver
  clk: gate: expose clk_gate_ops::is_enabled
  clk: nxp: clk-lpc32xx: rename clk_gate_is_enabled()
  clk: uniphier: add PXs3 clock data
  clk: hi6220: change watchdog clock source
  clk: Kconfig: Name RK805 in Kconfig for COMMON_CLK_RK808
  clk: cs2000: Add cs2000_set_saved_rate
  ...

Pull RTC updates from Alexandre Belloni:
 "Subsystem:
   - remove .open() and .release() RTC ops
   - constify i2c_device_id

  New driver:
   - Realtek RTD1295
   - Android emulator (goldfish) RTC

  Drivers:
   - ds1307: Beginning of a huge cleanup
   - s35390a: handle invalid RTC time
   - sun6i: external oscillator gate support"

* tag 'rtc-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (40 commits)
  rtc: ds1307: use octal permissions
  rtc: ds1307: fix braces
  rtc: ds1307: fix alignments and blank lines
  rtc: ds1307: use BIT
  rtc: ds1307: use u32
  rtc: ds1307: use sizeof
  rtc: ds1307: remove regs member
  rtc: Add Realtek RTD1295
  dt-bindings: rtc: Add Realtek RTD1295
  rtc: sun6i: Add support for the external oscillator gate
  rtc: goldfish: Add RTC driver for Android emulator
  dt-bindings: Add device tree binding for Goldfish RTC driver
  rtc: ds1307: add basic support for ds1341 chip
  rtc: ds1307: remove member nvram_offset from struct ds1307
  rtc: ds1307: factor out offset to struct chip_desc
  rtc: ds1307: factor out rtc_ops to struct chip_desc
  rtc: ds1307: factor out irq_handler to struct chip_desc
  rtc: ds1307: improve irq setup
  rtc: ds1307: constify struct chip_desc variables
  rtc: ds1307: improve trickle charger initialization
  ...

Pull sound fixes from Takashi Iwai:
 "Most of the commits are trivial cleanup patches, while one commit is a
  significant fix for the race at ALSA sequencer that was spotted by
  syzkaller"

* tag 'sound-fix-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Cancel pending autoload work at unbinding device
  ALSA: firewire: Use common error handling code in snd_motu_stream_start_duplex()
  ALSA: asihpi: Kill BUG_ON() usages
  ALSA: core: Use %pS printk format for direct addresses
  ALSA: ymfpci: Use common error handling code in snd_ymfpci_create()
  ALSA: ymfpci: Use common error handling code in snd_card_ymfpci_probe()
  ALSA: 6fire: Use common error handling code in usb6fire_chip_probe()
  ALSA: usx2y: Use common error handling code in submit_urbs()
  ALSA: us122l: Use common error handling code in us122l_create_card()
  ALSA: hdspm: Use common error handling code in snd_hdspm_probe()
  ALSA: rme9652: Use common code in hdsp_get_iobox_version()
  ALSA: maestro3: Use common error handling code in two functions

Pull SCSI fixes from James Bottomley:
 "A tiny update: one patch corrects a Kconfig problem with the shift of
  the SAS SMP code to BSG and the other removes a vestige of user space
  target mode"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_transport_sas: select BLK_DEV_BSGLIB
  scsi: Remove Scsi_Host.uspace_req_q