- 05 1月, 2011 20 次提交
-
-
由 Heiko Carstens 提交于
Add support for VMUR I/O interrupt statistics in /proc/interrupts. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add support for ccw based tape I/O interrupt statistics in /proc/interrupts. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add support for 3270 I/O interrupt statistics in /proc/interrupts. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add support for 3215 I/O interrupt statistics in /proc/interrupts. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add support for DASD I/O interrupt statistics in /proc/interrupts. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Jan Glauber 提交于
Count traditional qdio interrupts and adapter interrupts for qdio in the interrupt statistics. Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Up to now /proc/interrupts only has statistics for external and i/o interrupts but doesn't split up them any further. This patch adds a line for every single interrupt source so that it is possible to easier tell what the machine is/was doing. Part of the output now looks like this; CPU0 CPU2 CPU4 EXT: 3898 4232 2305 I/O: 782 315 245 CLK: 1029 1964 727 [EXT] Clock Comparator IPI: 2868 2267 1577 [EXT] Signal Processor TMR: 0 0 0 [EXT] CPU Timer TAL: 0 0 0 [EXT] Timing Alert PFL: 0 0 0 [EXT] Pseudo Page Fault [...] NMI: 0 1 1 [NMI] Machine Checks Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Let local_tick_enable/disable() reprogram the clock comparator so the function names make semantically more sense. Also that way the functions are more symmetric since normally each local_tick_enable() call usually would have a subsequent call to set_clock_comparator() anyway. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Move the two functions to timex.h where they make more sense than in hardirq.h. No functional change. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Add kprobes annotations to get the massive 'probe kernel.function("*") {}' stress test working. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Correct some minor coding style issues. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Restructure the kprobe breakpoint handler function. Add comments to make it more comprehensible and add a sanity check for re-entering kprobes. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Register %r14 and %r15 are already stored in jprobe_saved_regs, no need to store them a second time in jprobe_saved_r14 / jprobe_saved_r15. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The s390 architecture can execute code on kmalloc/vmalloc memory. No need for the __ARCH_WANT_KPROBES_INSN_SLOT detour. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Replace set_current_kprobe/reset_current_kprobe/save_previous_kprobe/ restore_previous_kprobe with a simpler scheme push_kprobe/pop_kprobe. The mini kprobes stack can store up to two active kprobes. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Determine instruction fixup details in resume_execution, no need to do it beforehand. Remove fixup, ilen and reg from arch_specific_insn. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Move the definition of the helper structure ins_replace_args to the only place where it is used and drop the old member as it is not needed. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The saved interrupt mask and the saved control registers are only relevant while single stepping is set up. A secondary kprobe while kprobe single stepping is active may not occur. That makes is safe to remove the save and restore of kprobe_saved_imask / kprobe_save_ctl from save_previous_kprobe and restore_previous_kprobe. Move all single step related code to two functions, enable_singlestep and disable_singlestep. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Remove special case of a kprobe on a breakpoint while a relocated instruction is single stepped. The only instruction that may cause a fault while kprobe single stepping is active is the relocated instruction. There is no kprobe on the instruction slot retrieved with get_insn_slot(). Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Make use of def_bool and def_tristate where possible and add sensible defaults to the config symbols where applicable. This shortens the defconfig file by another ~40 lines. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 04 1月, 2011 1 次提交
-
-
由 Andrew Morton 提交于
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702Reported-by: NMartin Ettl <ettl.martin@gmx.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 1月, 2011 5 次提交
-
-
由 Aric D. Blumer 提交于
Before this patch, the following error would sometimes occur after a resume on pxa3xx: /path/to/mm/memory.c:144: bad pmd 8040542e. The problem was that a temporary page table mapping was being improperly restored. The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu to avoid a prefetch abort. The pxa3xx_resume_after_mmu code requires that the r1 register holding the address of this mapping not be modified, however, resume_turn_on_mmu does modify it. It is mostly correct in that r1 receives the base table address, but it may also get other bits in 13:0. This results in pxa3xx_resume_after_mmu restoring the original mapping to the wrong place, corrupting memory and leaving the temporary mapping in place. Signed-off-by: NMatt Reimer <mreimer@sdgsystems.com> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Mike Rapoport 提交于
The commit 6ac6b817 (ARM: pxa: encode IRQ number into .nr_irqs) removed definition of ITE_LAST_IRQ which caused the following build error: CC arch/arm/common/it8152.o arch/arm/common/it8152.c: In function 'it8152_init_irq': arch/arm/common/it8152.c:86: error: 'IT8152_LAST_IRQ' undeclared (first use in this function) arch/arm/common/it8152.c:86: error: (Each undeclared identifier is reported only once arch/arm/common/it8152.c:86: error: for each function it appears in.) make[2]: *** [arch/arm/common/it8152.o] Error 1 Defining the IT8152_LAST_IRQ in the arch/arm/include/hardware/it8152.c fixes the build. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Lennert Buytenhek 提交于
As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}() directly. Signed-off-by: NLennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
-
由 Robert Richter 提交于
Disable preemption in init_ibs(). The function only checks the ibs capabilities and sets up pci devices (if necessary). It runs only on one cpu but operates with the local APIC and some MSRs, thus it is better to disable preemption. [ 7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483 [ 7.034385] caller is setup_APIC_eilvt+0x155/0x180 [ 7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1 [ 7.034392] Call Trace: [ 7.034400] [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0 [ 7.034404] [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180 [ ... ] Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812 Reported-by: <atswartz@gmail.com> Signed-off-by: NRobert Richter <robert.richter@amd.com> Cc: oprofile-list@lists.sourceforge.net <oprofile-list@lists.sourceforge.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Dan Carpenter <error27@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@kernel.org> [2.6.37.x] LKML-Reference: <20110103111514.GM4739@erda.amd.com> [ small cleanups ] Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Axel Lin 提交于
This patch fixes below build error by adding the missing asm/memory.h, which is needed for arch_is_coherent(). $ make pxa3xx_defconfig; make CC init/do_mounts_rd.o In file included from include/linux/list_bl.h:5, from include/linux/rculist_bl.h:7, from include/linux/dcache.h:7, from include/linux/fs.h:381, from init/do_mounts_rd.c:3: include/linux/bit_spinlock.h: In function 'bit_spin_unlock': include/linux/bit_spinlock.h:61: error: implicit declaration of function 'arch_is_coherent' make[1]: *** [init/do_mounts_rd.o] Error 1 make: *** [init] Error 2 Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NPeter Huewe <peterhuewe@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 1月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
isr_ack is never initialized. So, until the first PIC reset, interrupts may fail to be injected. This can cause Windows XP to fail to boot, as reported in the fallout from the fix to https://bugzilla.kernel.org/show_bug.cgi?id=21962. Reported-and-tested-by: NNicolas Prochazka <prochazka.nicolas@gmail.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 29 12月, 2010 2 次提交
-
-
由 Avi Kivity 提交于
We use the physical address instead of the base gfn for the four PAE page directories we use in unpaged mode. When the guest accesses an address above 1GB that is backed by a large host page, a BUG_ON() in kvm_mmu_set_gfn() triggers. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=21962Reported-and-tested-by: NNicolas Prochazka <prochazka.nicolas@gmail.com> KVM-Stable-Tag. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Imre Kaloz 提交于
arm: export dma_set_coherent_mask While a regression was fixed with commit 710224fa (arm: fix "arm: fix pci_set_consistent_dma_mask for dmabounce devices"), a new one was introduced as dma_set_coherent_mask wasn't exported for modules. This patch takes care for this issue. Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 12月, 2010 1 次提交
-
-
由 Jesper Juhl 提交于
In arch/x86/kernel/microcode_intel.c::generic_load_microcode() we have this: while (leftover) { ... if (get_ucode_data(mc, ucode_ptr, mc_size) || microcode_sanity_check(mc) < 0) { vfree(mc); break; } ... } if (mc) vfree(mc); This will cause a double free of 'mc'. This patch fixes that by just removing the vfree() call in the loop since 'mc' will be freed nicely just after we break out of the loop. There's also a second change in the patch. I noticed a lot of checks for pointers being NULL before passing them to vfree(). That's completely redundant since vfree() deals gracefully with being passed a NULL pointer. Removing the redundant checks yields a nice size decrease for the object file. Size before the patch: text data bss dec hex filename 4578 240 1032 5850 16da arch/x86/kernel/microcode_intel.o Size after the patch: text data bss dec hex filename 4489 240 984 5713 1651 arch/x86/kernel/microcode_intel.o Signed-off-by: NJesper Juhl <jj@chaosbits.net> Acked-by: NTigran Aivazian <tigran@aivazian.fsnet.co.uk> Cc: Shaohua Li <shaohua.li@intel.com> LKML-Reference: <alpine.LNX.2.00.1012251946100.10759@swampdragon.chaosbits.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 12月, 2010 6 次提交
-
-
由 Todd Android Poynor 提交于
If the irqsoff tracer is in use, stop tracing the interrupt disable interval when returning to userspace. Tracing userspace execution time as interrupts disabled time is not helpful for kernel performance analysis purposes. Only do so if the irqsoff tracer is enabled, to avoid overhead for lockdep, which doesn't care. Signed-off-by: NTodd Poynor <toddpoynor@google.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Stephen Warren 提交于
... and also remove misleading comment stating that this header is auto-generated. Signed-off-by: NStephen Warren <swarren@nvidia.com> Acked-by: NUwe Kleine-Knig <u.kleine-koenig@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Paul Mundt 提交于
The master clock initialization for SH7201 was wholly bogus. Users of the legacy API must initialize the clock rate through the struct clk itself rather than returning the clock frequency. Given that the init function itself is void, returning the frequency isn't terribly effective. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
With some recent tidying of duplicate register definitions the se7206 IRQ code broke: arch/sh/boards/mach-se/7206/irq.c: error: 'INTC_ICR' undeclared (first use in this function) arch/sh/boards/mach-se/7206/irq.c: error: (Each undeclared identifier is reported only once arch/sh/boards/mach-se/7206/irq.c: error: for each function it appears in.) Fix it up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Some of the SH4-202 code was overlooked in the set_rate() API conversion, resulting in: arch/sh/kernel/cpu/sh4/clock-sh4-202.c: error: too many arguments to function 'clk->ops->set_rate' Fix it up. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Wolfram Sang 提交于
Fix build errors like these (from a randconfig and my defconfig for a custom board): src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:549: error: dereferencing pointer to incomplete type: 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:636: error: implicit declaration of function 'nonseekable_open': 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:657: error: variable 'mpc52xx_wdt_fops' has initializer but incomplete type: 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:658: error: excess elements in struct initializer: 1 errors in 1 logs src/arch/powerpc/platforms/52xx/mpc52xx_gpt.c:658: error: unknown field 'owner' specified in initializer: 1 errors in 1 logs ... Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 22 12月, 2010 1 次提交
-
-
由 Yauhen Kharuzhy 提交于
The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte transfers, but at91_mci driver doesn't use them and handles all SDIO transfers as ordinary MMC block transfers. This causes problems for multiple-block SDIO transfers (in particular for 256-bytes blocks). Fix this situation by checking the opcode for SDIO CMD53 and setting the transfer type in the AT91_MCI_CMDR register properly. This patch was tested with libertas SDIO driver: problem with TX timeouts on big packets was eliminated. Signed-off-by: NYauhen Kharuzhy <yauhen.kharuzhy@promwad.com> Cc: <stable@kernel.org> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NChris Ball <cjb@laptop.org>
-
- 21 12月, 2010 1 次提交
-
-
由 Nicolas Pitre 提交于
The cnt32_to_63 algorithm relies on proper counter data evaluation ordering to work properly. This was missing from the provided documentation. Let's augment the documentation with the missing usage constraint and fix the only instance that got it wrong. Signed-off-by: NNicolas Pitre <nico@fluxnic.net> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 12月, 2010 2 次提交
-
-
由 Nicolas Pitre 提交于
Since commit 3e4d3af5 "mm: stack based kmap_atomic()", it is actively wrong to rely on fixed kmap type indices (namely KM_L2_CACHE) as kmap_atomic() totally ignores them and a concurrent instance of it may happily reuse any slot for any purpose. Because kmap_atomic() is now able to deal with reentrancy, we can get rid of the ad hoc mapping here. While the code is made much simpler, there is a needless cache flush introduced by the usage of __kunmap_atomic(). It is not clear if the performance difference to remove that is worth the cost in code maintenance (I don't think there are that many highmem users on that platform anyway) but that should be reconsidered when/if someone cares enough to do some measurements. Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-
由 Nicolas Pitre 提交于
Since commit 3e4d3af5 "mm: stack based kmap_atomic()", it is actively wrong to rely on fixed kmap type indices (namely KM_L2_CACHE) as kmap_atomic() totally ignores them and a concurrent instance of it may happily reuse any slot for any purpose. Because kmap_atomic() is now able to deal with reentrancy, we can get rid of the ad hoc mapping here, and we even don't have to disable IRQs anymore (highmem case). While the code is made much simpler, there is a needless cache flush introduced by the usage of __kunmap_atomic(). It is not clear if the performance difference to remove that is worth the cost in code maintenance (I don't think there are that many highmem users on that platform if at all anyway). Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org>
-