- 17 11月, 2015 2 次提交
-
-
由 Kuninori Morimoto 提交于
Data left/right aligned is controlled by PDTA bit on SSICR. But default is left-aligned. Thus 24bit sound will be very small sound without this patch. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
86167749("ASoC: rnsd: fix build regression without CONFIG_OF") added "depends on DMA_OF" in SND_SOC_RCAR to avoid compile error of sound/built-in.o: In function `rsnd_dma_request_channel': :(.text+0x9fb84): undefined reference to `of_dma_request_slave_channel' But, it was OF base DMAEngine API definition issue, not SND_SOC_RCAR issue. This patch remove DMA_OF dependence. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 16 11月, 2015 26 次提交
-
-
由 Kuninori Morimoto 提交于
ADG can output AUDIO_CLKOUTx, and these are generated from AUDIO_CLKx. Thus we need to call clk_prepare()/clk_enable() for AUDIO_CLKx. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
f1df1229("ASoC: rsnd: add common mod confirm method") added rsnd_mod_make_sure(), but rsnd_mod_xxx() comment position was wrong. This patch tidyup it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current MIX settings order was rough. This patch makes it match to datasheet. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current DVC settings order was rough. This patch makes it match to datasheet. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
8cca6e11c1 ("ASoC: rsnd: use mod base common method on CMD") added cmd.c. Let's move CMD related operation to cmd.c Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Geert Uytterhoeven 提交于
If the "clock-frequency" DT property is not found, req_rate is used uninitialized, and the "audio_clkout" clock will be created with an arbitrary clock rate. This uninitialized kernel stack data may leak to userspace through /sys/kernel/debug/clk/clk_summary, cfr. the value in the "rate" column: clock enable_cnt prepare_cnt rate accuracy phase -------------------------------------------------------------------- audio_clkout 0 0 4001836240 0 0 Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Acked-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
45a4394d03("ASoC: rsnd: use mod base common method on DMA phase3") Exchanged "void rsnd_dmapp_stop()" to "int rsnd_dmapp_stop()", but it returns inverted value. This patch fixup it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
2d604e03("ASoC: rsnd: disable SRC.out only when stop timing") added rsnd_src_quit_gen2(), but it should call rsnd_src_quit() same as before. This patch fixup it. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. This patch makes SSI parent mod base common method Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. This patch makes SSIU mod base common method Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. This patch makes CMD mod base common method Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. This patch makes DMA mod bse common method Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. DMA will be implemented as module. Then rsnd_dma_ops will be rebased to rsnd_mod_ops, but these are similar, but different function. This patch modify rsnd_dma_ops same style as rsnd_mod_ops. This is prepare for final merge Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. DMA will be implemented as module. Then rsnd_dma will be mod base. This patch makes rsnd_dma mod base, but still not yet completely finished. This mod is not yet installed to system at this point. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current ssi.c driver has random access to SSISR register. Let's use common rsnd_ssi_status_xxx() function Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current Renesas sound driver doesn't have 1:1 relationship between stream <-> mod because it is supporting MIX. Because of this reason rsnd_mod_interrupt() is searching correspond mod by for loop. But this loop is not needed, because each mod has own type. This patch avoid pointless loop by using mod->type. This patch is good for SSI-parent support, because stream might have 2 SSI as SSI-parent/child. SSI interrupt handler will be called twice if stream has SSI-parent without this patch. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current SSI/SRC restarts HW if under/over flow happened to avoid L/R invert issue. But it will stop HW if too many error happen. But if it stops on HW, other side under/over flow happen. OTHA, it will be forever loop interrupt if something strange error happen on HW/driver without escape route of large number error. To avoid this issue, it indicates error message if large number error occur, and disables error interrupt. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. Current rsnd is controling each mod's status on mod. But it was not good design for SSI, because stream might has SSI-parent. In such case, it can't play/capture in same time, because SSI-parent is used as normal SSI in other stream, but it shares same status. To avoid this issue each mod's status is controlled by rsnd_dai_stream instead of rsnd_mod. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Because SRC is connected to DMA and DMA want to keep dreq when stop timing. This patch makes SRC stop SRC.out only when stop timing. And it stops both SRC.out/SRC.in when quit timing Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Part of SSI IRQ enable/disable was controlled by SRU (on Gen1) or CMD (on Gen2). Because of this reason SSI IRQ function was implemented under src.c. but it is not understandable. Let's move it to ssi.c Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. Current rsnd_dma_of_path is assuming that all mods are related to DMA. But it will be wrong. This patch tidyup this wrong assumption Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Current Renesas sound is supporting PIO fallback if it can't use DMA. In such case, it should remove all attached modules, but current driver is missing about CTU/MIX. Because current implement requests specific mod for remove. To avoid same things in future, this patch removes all mods, and re-connects SSI when PIO fallback case. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. DMAC/SSIU/SSI-parent/CMD will be implemented as module, but these are not customer controlled module. These should be automatically install to system. Because of this, rsnd_dai_connect() should be called from each mod. SSI can be very special, because it will be installed as SSI-parent / SSI-child. Thus, new rsnd_dai_connect() has type parameter which should be mod->type except SSI-parent Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. DMA will be implemented as module. Then each rsnd_dma_ops will be rsnd_mod_ops. But current rsnd_dma_ops::init means "DMA attach". This patch removes .init from rsnd_dma_ops, and renames rsnd_dma_init() to rsnd_dma_attach() Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. DMA will be implemented as module. Current DMA definition is no longer needed on rsnd.h. Let's move it to dma.c Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kuninori Morimoto 提交于
Renesas sound needs many devices (SSI/SSIU/SRC/CTU/MIX/DVC/CMD/AudioDMAC/AudioDMACpp). SSI/SRC/CTU/MIX/DVC are implemented as module. SSI parent, SSIU are implemented as part of SSI CMD is implemented as part of CTU/MIX/DVC AudioDMAC/AudioDMACpp are implemented as part of SSI/SRC It is nice sense that these all devices are implemented as mod. Current rsnd_mod is member of rsnd_mod. But the DMA user is only SSI/SRC. This DMA will be implemented as module. As 1st step, DMA become SSI/SRC member by this patch. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 28 10月, 2015 1 次提交
-
-
由 Andrew F. Davis 提交于
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: NAndrew F. Davis <afd@ti.com> Acked-by: NJonathan Cameron <jic23@kernel.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 26 10月, 2015 2 次提交
-
-
由 Nicolin Chen 提交于
Change them to #ifdef as CONFIG_PM_SLEEP might not be defined at all. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NNicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Axel Lin 提交于
So we have consistent order for register bit defines. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 24 10月, 2015 9 次提交
-
-
DW i2s controller's master/slave config can be read from a read-only register. Machine driver can try to set a master/slave format on cpu-dai using 'set_fmt' of dai ops. A check is added to verify codec is master when dwc is slave and vice-versa. Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Oder Chiou 提交于
The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: NOder Chiou <oder_chiou@realtek.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jeeja KP 提交于
Some module pin connection are static and defined by the topology. This patch adds support for static pin definitions in topology widget private data Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jeeja KP 提交于
If copier instance is connected to a DMA gateway then driver needs to configure the gateway configuration otherwise set it to invalid. This patch sets the non gateway copier node value to invalid. Signed-off-by: NDharageswari.R <dharageswari.r@intel.com> Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jeeja KP 提交于
If DSP initialization fails, ipc to disable notification will cause NULL ptr exception as ipc is not initialized. This patch returns error if dsp init fails before sending disable notification ipc. Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jeeja KP 提交于
Each FW modules can report underrun/overrun notification from all modules. This patch disables underrun/overrun notification after firmware is loaded. This will be supportted for debug mode only thru debugfs Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Jeeja KP 提交于
DSP firmware has interface change for SSP node index structure. New FW interface removes the dual_mono field and adds 4 bits for TDM slot group index. This patch updates the ssp dma to align with the DSP firmware structure. Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Subhransu S. Prusty 提交于
Currently params only for first copier widget identified in the source/sink path is queried from NHLT. In the dapm route the playback/capture widget may be connected to more than one copier widget. This patch adds return check to return only for any error case. Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: NJeeja KP <jeeja.kp@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Subhransu S. Prusty 提交于
In case of playback, for the BE dai source path should be iterated to find the pipe params. With sink path iterated, this resulted in a loop and kernel panic with page request failure. Similar are the cases for Capture and FE dais. Using correct macros to fix the panic Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-