AverTV Studio 307 has only one composite input.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Acked-by: NNickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix the following dependency issue:

ERROR: "dvb_dmx_init" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_unregister_adapter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_register_frontend" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_unregister_frontend" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_net_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_frontend_detach" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmxdev_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmx_swfilter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_net_init" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmx_release" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_register_adapter" [drivers/media/video/video-buf-dvb.ko] undefined!
ERROR: "dvb_dmxdev_init" [drivers/media/video/video-buf-dvb.ko] undefined!

ERROR: "mt2131_attach" [drivers/media/video/cx23885/cx23885.ko] undefined!
ERROR: "s5h1409_attach" [drivers/media/video/cx23885/cx23885.ko] undefined!
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

VIDEO_CX23885 must select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 Express
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

DVB-S TT 1500 must use the TT keymap.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

vidioc_int_g_ifparm returns platform-specific information about the
interface settings used by the sensor. Support for [gs]_ext_clk has
been removed.

Fix indentation and remove useless & characters.

Remove experiment for typechecking slave callback function arguments.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Remove support for g_ext_clk and s_ext_clk. The same functionality is
now handled by g_ifparm.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds BT.656 interface settings for [gs]_ifparm.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

vidioc_int_g_ifparm can be used to obtain hardware-specific information
about the interface used by the slave.

Rearrange v4l2-int-device.h as well.

Also remove useless & characters.
Signed-off-by: NSakari Ailus <sakari.ailus@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

There's a serious bug in saa6588.c, it uses a non-initialized spin_lock.
Funny thing is that it works fine with bttv, but completly freezes the
machine if e.g. saa7134 is loaded.

Thanks to Derek Philip for reporting this bug on the rdsd-devel list.

This patch adds the missing spin_lock_init().
Signed-off-by: NHans J. Koch <hjk@linutronix.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

I2C adapters should only support I2C_M_REV_DIR_ADDR if they really have
to (i.e. if they are connected to a broken I2C device which needs this
deviation from the standard I2C protocol.) As no media chip driver
uses I2C_M_REV_DIR_ADDR, I don't think that the usbvision driver needs
to support it.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NThierry Merle <thierry.merle@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* I2C adapters aren't expected to handle I2C_M_NOSTART unless they
  really have to. As the pvrusb2 driver doesn't support it, I take it
  that it doesn't need it so it shouldn't mention it at all.
* I2C_FUNC_SMBUS_EMUL includes I2C_FUNC_SMBUS_BYTE_DATA so listing
  both is redundant.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

It's useful to see specific details for how the pvrusb2 driver is
figuring out things related to the video standard, independent of
other initialization activities.  So let's set up a separate debug
mask bit for this and turn it on.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The v4l tveeprom logic tells us what video standards are supported by
the hardware, however it doesn't directly tell us what should be the
preferred initial standard.  For example "NTSC/NTSC-J" devices are
reported by tveeprom as support NTSC-M and PAL-M, and while that might
be true, in the vast majority of cases NTSC-M is really what the user
is going to want.  However the driver previously just arbitrarily
picked the "lowest numbered" standard as the initial default, which in
that case would have been PAL-M.  (And making matters more confusing -
this only caused real problems on 24xxx devices because the saa7115 on
29xxx seems to autodetect the right answer anyway.)  This change
implements an algorithm that uses the set of "supported" standards as
a hint to decide on the initial standard.  This algorithm ONLY comes
into play if the driver isn't specifically told what to do; said
another way - the user can always still change the standard via the
sysfs interface, via the usual V4L methods, or even specified as a
module parameter.  The idea here is only to pick a better starting
point if the user (or app) doesn't otherwise do something to set the
standard; otherwise this change has no real impact.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This is a bunch of cleanup in various places to improve behavior based
on actual device type being driven.  While this doesn't actually
affect operation with existing devices, it cleans things up so that it
will be easier / more deterministic when other devices are added.
Ideally we should make stuff like this table-driven, but for now this
is just a series of small incremental (read: safe) improvements.
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The pvrusb2 driver already has a method for extracting the FX2's
program memory back out to a user application; this ability is used to
facilitate manual firmware extraction as per the procedure documented
on the pvrusb2 web site.  This change follows that pattern and
implements a corresponding method to grab the binary contents of the
PVR USB2 prom (which for PVR USB2 devices can contain information in
addition to the usual Hauppauge metadata).
Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMike Isely <isely@pobox.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Fix SVideo input on KWorld DVB-T 220 boards. Without this patch, the
luma pin on the SVideo input is treated as a composite in, and the
chroma pin is ignored.

Also, fix the radio, and provide a second composite input for people who
are used to the existing composite on SVideo connector behaviour.
Signed-off-by: NSimon Farnsworth <simon.farnsworth@onelan.co.uk>
Reviewed-by: NHermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Store a pointer to the required i2c_bus so that we do not put the wrong
analog demod into standby.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

cx23885: Changes to allow demodulators on each transport bus.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Cardlist generated by cx23885.pl
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds digital ATSC / QAM support for the DViCO FusionHDTV5 Express.
Remote control is supported by ir-kbd-i2c, RTC is supported by rtc-isl1208.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Changes to support MPEG TS on VIDB
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Changes to support interrupts on VIDB
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- define missing register bit values for VID_B
- corrected VID/VBI_B_GPCNT_CTL register addresses
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

start_dma() would fail to start dma if a device used VIDB (portb).
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The switch() statement is no longer required.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The HVR1250 and HVR1800 boards need the s5h1409 demod GPIO enabled.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Reviewed-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Not sure why they are there, but they don't do anything now.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Use the balance control to make the mono volume control stereo.

Note that full range isn't supported.  The balance control attenuates one
channel by 0 to -63 dB, and the volume control provides additional attenuation
to both channels by another 0 to -63 dB.

So the channel with the most attenuation has a range of 0 to -126 dB, while
the other channel only has a range of 0 to -63 dB.  ALSA volume controls don't
appear to support this concept.  I just limited the range to 0 to -63 total.
Once you get to -63 dB, you're already at silence, so additional attenuation
is pretty much pointless anyway.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Auto-load ir-kbd-i2c for ir receiver support, and rtc-isl1208 for rtc 
support for the FusionHDTV5 RT Gold.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Ignore 0x6b and 0x6f on cx88 boards. Some FusionHDTV cards
have an ir receiver at 0x6b and an RTC at 0x6f which can
get corrupted if probed.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

- fixed missing buttons in keymap.

- make function names & descriptions more generic,
  since this same ir receiver and remote is used in
  many FusionHDTV products.

- miscellaneous cleanups.
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

This patch adds support for the built-in IR receiver of the DViCO
Fusion HDTV5 RT GOLD PCI card, using FusionHDTV MCE remote controller.
Signed-off-by: NChaogui Zhang <czhang1974@gmail.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

I wanted to document the NMI assert issue inside the code, even though
it's already documented in the patch history. If/when the next cx23887
revision appears, is may need to be enabled on that also.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

A number of Hauppauge boards share the same tuner and demod
configurations. This patch removes duplicate structures.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Moving some defines into the correct header file.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Removed unused code.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Unused code is removed.
Signed-off-by: NSteven Toth <stoth@hauppauge.com>
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>