- 21 6月, 2011 18 次提交
-
-
由 Greg Rose 提交于
In two places storage for mbx_ops is misidentified as type ixgbe_mac_operations. Reported-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michał Mirosław 提交于
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Michał Mirosław 提交于
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - RX csum disabled by default - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alex Deucher 提交于
0xff01 is not an actual voltage value, but a flag for the driver. If the power state as that value, skip setting the voltage. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Richard Cochran 提交于
Because the socket buffer is freed in the completion interrupt, it is not safe to access it after submitting it to the hardware. Cc: stable@kernel.org Cc: Sachin Sanap <ssanap@marvell.com> Cc: Zhangfei Gao <zgao6@marvell.com> Cc: Philip Rakity <prakity@marvell.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sebastian Poehn 提交于
This patch adds all missing functionalities for nfc except GRXFH. There is so much code because hardware has not a TCAM. Further hardware rule space is very limited. So I had to extensively use optimization features. Both reasons lead to the necessity to hold all online flows in a linked-list. Change-log: # Some suggestions by Joe Perches applied (thanks!) # Shorted some logs # Use memcmp() for comparing Signed-off-by: NSebastian Poehn <sebastian.poehn@belden.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) transmit time stamping. Compile tested only. Cc: Shlomi Gridish <gridish@freescale.com> Cc: Li Yang <leoli@freescale.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) transmit time stamping Compile tested only. Cc: Sachin Sanap <ssanap@marvell.com> Cc: Zhangfei Gao <zgao6@marvell.com> Cc: Philip Rakity <prakity@marvell.com> Cc: Mark Brown <markb@marvell.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) transmit time stamping. Compile tested only. Cc: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) transmit time stamping. Compile tested only. Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) transmit time stamping Compile tested only. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) time stamping. Software time stamping using the SO_TIMESTAMPING API was tested and found to be working on the LITE5200B board. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) time stamping. Since this MAC is based on phylib, adding the hooks makes hardware time stamping in the phy possible. Compile tested only. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) time stamping. Since this MAC uses phylib, adding the hooks make hardware time stamping in the phy possible. Compile tested only. Cc: John Linn <john.linn@xilinx.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch enables software (and phy device) time stamping. This file is included by drivers/net/ax88796.c, which is based on phylib. So, this patch makes hardware time stamping in the PHY possible. Compile tested only. Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As soon as skb is given to hardware, TX completion can free skb under us. Therefore, we should update dev stats before kicking the device. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
stats_lock is non useless, lets remove it. Also, ndo_get_stats64() doesnt have to clear the stats, caller takes care of this. Note: folding 32bit fields in 64bit one is problematic when one of 32bit values wraps : SNMP reader will see a ~2^32 back change in a 64bit value. A future patch should fix this. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Andrew Gallatin <gallatin@myri.com> CC: Brice Goglin <brice@myri.com> Acked-by: NJon Mason <mason@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Remove the myri_sbus driver. Why? * There is no possibility of ethernet mode on this adapter, so it's Myrinet only. * It won't inter-op with modern versions of Myrinet, and thus can only work with legacy adapters. * There are no in-kernel Linux drivers for the PCI version of this adapter, so it only can work on ~15 year old Sun hardware. It's long in the tooth, let's take it to the knackers. Signed-off-by: NJon Mason <mason@myri.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2011 15 次提交
-
-
由 Eric Dumazet 提交于
Using 64bit stats on 32bit arches must use a synchronization or readers can get transient values. Fixes bug introduced in commit 6311cc44 (veth: convert to 64 bit statistics) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
Made necessary by commit a6b7a407 ("net: remove interrupt.h inclusion from netdevice.h"). Fixes these build errors: drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1212:3: error: implicit declaration of function 'in_interrupt' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1390:4: error: implicit declaration of function 'tasklet_schedule' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:1988:3: error: implicit declaration of function 'tasklet_init' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:2288:5: error: implicit declaration of function 'tasklet_kill' drivers/staging/brcm80211/brcmfmac/dhd_linux.c:232:24: error: field 'tasklet' has incomplete type drivers/staging/brcm80211/brcmfmac/wl_iw.c:3670:2: error: implicit declaration of function 'in_interrupt' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1349:3: error: implicit declaration of function 'free_irq' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1352:2: error: implicit declaration of function 'tasklet_kill' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:1538:4: error: implicit declaration of function 'tasklet_schedule' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:765:2: error: implicit declaration of function 'tasklet_init' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:817:2: error: implicit declaration of function 'request_irq' drivers/staging/brcm80211/brcmsmac/wl_mac80211.c:817:31: error: 'IRQF_SHARED' undeclared (first use in this function) drivers/staging/brcm80211/brcmsmac/wl_mac80211.h:65:24: error: field 'tasklet' has incomplete type drivers/staging/rtl8187se/ieee80211/ieee80211.h:994:24: error: field 'ps_task' has incomplete type drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:1790:3: error: implicit declaration of function 'tasklet_schedule' drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c:2590:2: error: implicit declaration of function 'tasklet_init' drivers/staging/rtl8187se/r8180.h:461:24: error: field 'irq_rx_tasklet' has incomplete type drivers/staging/rtl8187se/r8180_core.c:2764:2: error: implicit declaration of function 'tasklet_init' drivers/staging/rtl8187se/r8180_core.c:2954:2: error: implicit declaration of function 'request_irq' drivers/staging/rtl8187se/r8180_core.c:2954:55: error: 'IRQF_SHARED' undeclared (first use in this function) drivers/staging/rtl8187se/r8180_core.c:3641:4: error: implicit declaration of function 'free_irq' drivers/staging/rtl8187se/r8180_core.c:4026:3: error: implicit declaration of function 'tasklet_schedule' drivers/staging/rtl8192e/ieee80211/ieee80211.h:2000:24: error: field 'ps_task' has incomplete type drivers/staging/rtl8192e/r8192E.h:909:24: error: field 'irq_rx_tasklet' has incomplete type drivers/staging/rtl8192e/r8192E.h:910:24: error: field 'irq_tx_tasklet' has incomplete type drivers/staging/rtl8192e/r8192E.h:911:31: error: field 'irq_prepare_beacon_tasklet' has incomplete type drivers/staging/rtl8192e/r8192E_core.c:2008:2: error: implicit declaration of function 'tasklet_init' drivers/staging/rtl8192e/r8192E_core.c:2412:54: error: 'IRQF_SHARED' undeclared (first use in this function) drivers/staging/rtl8192e/r8192E_core.c:2412:9: error: implicit declaration of function 'request_irq' drivers/staging/rtl8192e/r8192E_core.c:4640:4: error: implicit declaration of function 'free_irq' drivers/staging/rtl8192e/r8192E_core.c:620:2: error: implicit declaration of function 'synchronize_irq' drivers/staging/rtl8192e/r8192E_core.c:913:3: error: implicit declaration of function 'tasklet_schedule' drivers/staging/rtl8192u/ieee80211/ieee80211.h:1993:24: error: field 'ps_task' has incomplete type Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Airlie 提交于
this printk isn't really useful, just drop it for now. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Since we were calling the wptr function before checking if the IH was even enabled, or the GPU wasn't shutdown, we'd get spam in the logs when the GPU readback 0xffffffff. This reorders things so we return early in the no IH and GPU shutdown cases. Reported-and-tested-by: ManDay on #radeon Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This is used during phy init to set up the phy for DP. This may fix DP problems on DCE3.2 cards. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Certain revisions of the vbios on DCE3.2 cards have a bug in the transmitter control table which prevents duallink from being enabled properly on some cards. The action switch statement jumps to the wrong offset for the OUTPUT_ENABLE action. The fix is to use the ENABLE action rather than the OUTPUT_ENABLE action on the affected cards. In fixed version of the vbios, both actions jump to the same offset, so the change should be safe. Reported-and-tested-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Its illegal to dereference skb after dev_kfree_skb(skb) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Robin Holt <holt@sgi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As soon as skb is given to hardware and spinlock released, TX completion can free skb under us. Therefore, we should update netdev stats before spinlock release. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
Otherwise we will not see the name of the slave dev in error message: [ 388.469446] (null): doesn't support polling, aborting. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2011 7 次提交
-
-
由 Magnus Damm 提交于
According to the data sheet for G4, AP4 and AG5 KEYSC MODE_6 is 8x8 keys. Bump up MAXKEYS to 64 too. Signed-off-by: NMagnus Damm <damm@opensource.se> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Janusz Krzysztofik 提交于
Otherwise the updated evdev driver (commit cdda911c, "Input: evdev - only signal polls on full packets") no longer works on top of omap-keypad. Tested on Amstrad Delta. Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Reviewed-by: NHenrik Rydberg <rydberg@euromail.se> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
We should only wake waiters on the event device when we actually post an EV_SYN/SYN_REPORT to the queue. Otherwise we end up making waiting threads runnable only to go right back to sleep because the device still isn't readable. Reported-by: NJeffrey Brown <jeffbrown@android.com> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Francois Romieu 提交于
Firmware checking is only performed when the firmware is loaded instead of each time the driver inits the phy. Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Hayes Wang 提交于
The new firmware format adds versioning as firmware for a specific chipset appears to be subject to change. Current "legacy" format is still supported. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Francois Romieu 提交于
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Guenter Roeck 提交于
Initialize dynamically allocated sysfs attributes before device_create_file() call to suppress lockdep_init_map() warning if lockdep debugging is enabled. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org> Cc: stable@kernel.org # 2.6.34+
-