- 13 12月, 2009 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6由 Linus Torvalds 提交于
* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6: IXP4xx: GTWX5715 platform only has two PCI IRQ lines, not four. IXP4xx: Introduce IXP4XX_GPIO_IRQ(n) macro and convert IXP4xx platform files. IXP4xx: move Gemtek GTWX5715 platform macros to the platform code. IXP4xx: Remove unused Motorola PrPMC1100 platform macros. IXP4xx: move FSG platform macros to the platform code. IXP4xx: move DSM G600 platform macros to the platform code. IXP4xx: move NAS100D platform macros to the platform code. IXP4xx: move NSLU2 platform macros to the platform code. IXP4xx: move Coyote platform macros to the platform code. IXP4xx: move AVILA platform macros to the platform code. IXP4xx: move IXDP425 platform macros to the platform code. IXP4xx: Extend PCI MMIO indirect address space to 1 GB. IXP4xx: Fix compilation failure with CONFIG_IXP4XX_INDIRECT_PCI. IXP4xx: Drop "__ixp4xx_" prefix from in/out/ioread/iowrite functions for clarity. IXP4xx: Rename indirect MMIO primitives from __ixp4xx_* to __indirect_*. IXP4xx: Ensure index is positive in irq_to_gpio() and npe_request(). ARM: fix insl() and outsl() endianness on IXP4xx architecture. IXP4xx: Fix normally-disabled debugging text in drivers/net/arm/ixp4xx_eth.c. IXP4xx: change the timer base frequency to 66.666000 MHz.
-
由 Linus Torvalds 提交于
As shown by the previous patch (6698e347: "tty: Fix BKL taken under a spinlock bug introduced in the BKL split") the BKL removal is prone to some subtle issues, where removing the BKL in one place may in fact make a previously nested BKL call the new outer call, and then prone to nasty deadlocks with other spinlocks. In general, we should never take the BKL while we're holding a spinlock, so let's just add a "might_sleep()" to it (even though the BKL doesn't technically sleep - at least not yet), and we'll get nice warnings the next time this kind of problem happens during BKL removal. Acked-and-Tested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The fasync path takes the BKL (it probably doesn't need to in fact) while holding the file_list spinlock. You can't do that with the kernel lock: it causes lock inversions and deadlocks. Leave the BKL over that bit for the moment. Identified by AKPM. Signed-off-by: NAlan Cox <alan@linux.intel.com> Acked-and-Tested-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits) powerpc: Fix usage of 64-bit instruction in 32-bit altivec code MAINTAINERS: Add PowerPC patterns powerpc/pseries: Track previous CPPR values to correctly EOI interrupts powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP powerpc: Make "intspec" pointers in irq_host->xlate() const powerpc/8xx: DTLB Miss cleanup powerpc/8xx: Remove DIRTY pte handling in DTLB Error. powerpc/8xx: Start using dcbX instructions in various copy routines powerpc/8xx: Restore _PAGE_WRITETHRU powerpc/8xx: Add missing Guarded setting in DTLB Error. powerpc/8xx: Fixup DAR from buggy dcbX instructions. powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions. powerpc/8xx: Update TLB asm so it behaves as linux mm expects. powerpc/8xx: Invalidate non present TLBs powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate pseries/pseries: Add code to online/offline CPUs of a DLPAR node powerpc: stop_this_cpu: remove the cpu from the online map. powerpc/pseries: Add kernel based CPU DLPAR handling sysfs/cpu: Add probe/release files powerpc/pseries: Kernel DLPAR Infrastructure ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Overwrite pin config on intel DG45ID board. intelhdmi - dont power off HDA link ALSA: hrtimer - Fix lock-up ALSA: intelhdmi - add channel mapping for typical configurations ALSA: intelhdmi - channel mapping applies to Pin ALSA: intelhdmi - accept DisplayPort pin ALSA: hda - show HBR(High Bit Rate) pin cap in procfs ALSA: hda - Fix LED GPIO setup for HP laptops with IDT codecs ASoC: Fix build of OMAP sound drivers ALSA: opti93x: fix irq releasing if the irq cannot be allocated
-
由 Linus Torvalds 提交于
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (75 commits) omap3: Fix OMAP35XX_REV macros omap: serial: fix non-empty uart fifo read abort omap3: Zoom2/3: Update hsmmc board config params omap3 : Enable TWL4030 Keypad for Zoom2 and Zoom3 boards omap3: id code detection 3525 vs 3515 omap3: rx51: Use wl1251 in SPI mode 3 omap3: zoom2/3: make MMC slot work again omap1: htcherald: Update defconfig to include mux support omap1: LCD_DMA: Use some define rather than a hexadecimal omap: header: remove unused data-type omap: arch/arm/plat-omap/devices.c - sort alphabetically omap: Correcting GPMC_CONFIG1_DEVICETYPE_NAND OMAP3: serial - allow platforms specify which UARTs to initialize omap3: cm-t35: add mux initialization OMAP4: Sync up omap4430 defconfig OMAP4: Remove the secondary wait loop OMAP4: AuxCoreBoot registers only accessible in secure mode OMAP4: Fix SRAM base and size OMAP4: Fix cpu detection omap3: pandora: board file updates for .33 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: be2net: fix error in rx completion processing. igbvf: avoid reset storms due to mailbox issues igb: fix handling of mailbox collisions between PF/VF usb: remove rare pm primitive for conversion to new API
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab, kmemleak: pass the correct pointer to kmemleak_erase() slab, kmemleak: stop calling kmemleak_erase() unconditionally SLAB: Fix unlikely() annotation in __cache_alloc_node() SLAB: Fix lockdep annotations for CPU hotplug SLUB: Fix __GFP_ZERO unlikely() annotation slub: allow stats to be cleared
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (21 commits) sched: Remove forced2_migrations stats sched: Fix memory leak in two error corner cases sched: Fix build warning in get_update_sysctl_factor() sched: Update normalized values on user updates via proc sched: Make tunable scaling style configurable sched: Fix missing sched tunable recalculation on cpu add/remove sched: Fix task priority bug sched: cgroup: Implement different treatment for idle shares sched: Remove unnecessary RCU exclusion sched: Discard some old bits sched: Clean up check_preempt_wakeup() sched: Move update_curr() in check_preempt_wakeup() to avoid redundant call sched: Sanitize fork() handling sched: Clean up ttwu() rq locking sched: Remove rq->clock coupling from set_task_cpu() sched: Consolidate select_task_rq() callers sched: Remove sysctl.sched_features sched: Protect sched_rr_get_param() access to task->sched_class sched: Protect task->cpus_allowed access in sched_getaffinity() sched: Fix balance vs hotplug race ... Fixed up conflicts in kernel/sysctl.c (due to sysctl cleanup)
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
- 12 12月, 2009 29 次提交
-
-
由 Alexey Fisher 提交于
The pin config provided by BIOS have some problems: 0x0221401f: [Jack] HP Out at Ext Front <-- other association and sequence 0x02a19020: [Jack] Mic at Ext Front <-- other association 0x01113014: [Jack] Speaker at Ext Rear <-- line out (not speaker) 0x01114010: [Jack] Speaker at Ext Rear <-- line out 0x01a19030: [Jack] Mic at Ext Rear <-- other association 0x01111012: [Jack] Speaker at Ext Rear <-- line out 0x01116011: [Jack] Speaker at Ext Rear <-- line out 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x40f000f0: [N/A] Other at Ext N/A 0x01451140: [Jack] SPDIF Out at Ext Rear 0x40f000f0: [N/A] Other at Ext N/A just overwrite it. Signed-off-by: NAlexey Fisher <bug-track@fisher-privat.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Pekka Enberg 提交于
-
由 Ajit Khaparde 提交于
There are certain skews of the NIC which have multiple bits set in adapter->cap. Use & instead of == to process rx completions. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
From: Alexander Duyck <alexander.h.duyck@intel.com> This change makes it so that reset/interrupt storms can be avoided when there are mailbox issues. The new behavior is to only allow the device to trigger mailbox related resets only once every 10 seconds. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch changes the handling of collisions between the use of the PF/VF sides of the mailbox. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Neukum 提交于
This patch removes a rare use of the USB power management API which won't be supported after the conversion to the new generic runtime power management framework. Functionality is not altered. Signed-off-by: NOliver Neukum <oliver@neukum.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits) net: Handle NETREG_UNINITIALIZED devices correctly can: add the driver for Analog Devices Blackfin on-chip CAN controllers xfrm: Fix truncation length of authentication algorithms installed via PF_KEY net: use compat helper functions in compat_sys_recvmmsg net: fix compat_sys_recvmmsg parameter type cxgb3: Fixing EEH handlers cnic: Zero out status block and Event Queue indices. cnic: Send delete command when shutting down iSCSI ring. net: smc91x: Fix up type mismatch in smc_drv_resume(). smc91x: fix unused flags warnings on UP systems MAINTAINERS: Transfering maintainership of cdc-ether net: Add missing TST_CFG_WRITE bits around sky2_pci_write net: Fix Yukon-2 Optima TCP offload setup net: niu uses crc32, so select CRC32 wireless: update old static regulatory domain rules mac80211: Revert 'Use correct sign for mesh active path refresh' mac80211: Fixed bug in mesh portal paths net/mac80211: Correct size given to memset b43: Remove reset after fatal DMA error rtl8187: add radio led and fix warnings on suspend ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground由 Linus Torvalds 提交于
* 'compat-ioctl-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: usbdevfs: move compat_ioctl handling to devio.c lp: move compat_ioctl handling into lp.c compat_ioctl: pass compat pointer directly to handlers compat_ioctl: simplify lookup table compat_ioctl: simplify calling of handlers compat_ioctl: inline all conversion handlers compat_ioctl: Remove BKL compat_ioctl: remove all VT ioctl handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: add sys_recvmmsg to unistd.h asm-generic: add sys_accept4 to unistd.h asm-generic/gpio.h: add some forward decls of the device struct asm-generic: Fix typo in asm-generic/unistd.h. lib/checksum: fix one more thinko lib/checksum.c: make do_csum optional lib/checksum.c: use 32-bit arithmetic consistently
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: itimer: Fix the itimer trace print format hrtimer: move timer stats helper functions to hrtimer.c hrtimer: Tune hrtimer_interrupt hang logic
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Avoid out of bounds array reference in save_trace() futex: Take mmap_sem for get_user_pages in fault_in_user_writeable lockstat: Add usage info to Documentation/lockstat.txt lockstat: Fix min, max times in /proc/lock_stats
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Fix PCI hotplug with passthrough mode x86/amd-iommu: Fix passthrough mode x86: mmio-mod.c: Use pr_fmt x86: kmmio.c: Add and use pr_fmt(fmt) x86: i8254.c: Add pr_fmt(fmt) x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt) x86: es7000_32.c: Use pr_<level> and add pr_fmt(fmt) x86: Print DMI_BOARD_NAME as well as DMI_PRODUCT_NAME from __show_regs() x86: Factor duplicated code out of __show_regs() into show_regs_common() arch/x86/kernel/microcode*: Use pr_fmt() and remove duplicated KERN_ERR prefix x86, mce: fix confusion between bank attributes and mce attributes x86/mce: Set up timer unconditionally x86: Fix bogus warning in apic_noop.apic_write() x86: Fix typo in arch/x86/mm/kmmio.c x86: ASUS P4S800 reboot=bios quirk
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: Remove comparing of NULL to va_list in trace_array_vprintk() tracing: Fix function graph trace_pipe to properly display failed entries tracing: Add full state to trace_seq tracing: Buffer the output of seq_file in case of filled buffer tracing: Only call pipe_close if pipe_close is defined tracing: Add pipe_close interface
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (57 commits) x86, perf events: Check if we have APIC enabled perf_event: Fix variable initialization in other codepaths perf kmem: Fix unused argument build warning perf symbols: perf_header__read_build_ids() offset'n'size should be u64 perf symbols: dsos__read_build_ids() should read both user and kernel buildids perf tools: Align long options which have no short forms perf kmem: Show usage if no option is specified sched: Mark sched_clock() as notrace perf sched: Add max delay time snapshot perf tools: Correct size given to memset perf_event: Fix perf_swevent_hrtimer() variable initialization perf sched: Fix for getting task's execution time tracing/kprobes: Fix field creation's bad error handling perf_event: Cleanup for cpu_clock_perf_event_update() perf_event: Allocate children's perf_event_ctxp at the right time perf_event: Clean up __perf_event_init_context() hw-breakpoints: Modify breakpoints without unregistering them perf probe: Update perf-probe document perf probe: Support --del option trace-kprobe: Support delete probe syntax ...
-
git://codeaurora.org/quic/kernel/dwalker/linux-msm由 Linus Torvalds 提交于
* 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msm: HTC Dream: mmc compilation fixes video: Allow selecting MSM framebuffer in Kconfig Add arm msm maintainer entry msm: Add memory map for HTC Dream msm: add minimal board file for HTC Dream device msm: make debugging UART (for DEBUG_LL) configurable
-
由 David S. Miller 提交于
Conflicts: include/net/tcp.h
-
由 Tony Lindgren 提交于
-
由 Sanjeev Premi 提交于
In original implementation, the revision passed to these macros contained revision number in lower nibble. But, later the revision bits (OMAP_REVBITS_XX) were defined to use omap_revision[15:08] where revision number is containied in higher nibble. This patch updates the macros; else incorrect revision is detected for OMAP35xx devices. Signed-off-by: NSanjeev Premi <premi@ti.com>
-
由 vikram pandita 提交于
OMAP3xxx and OMAP4430 UART IP blocks have a restriction wrt RX FIFO. Empty RX fifo read causes an abort. OMAP3xxx: UART IP revision >= 0x52 have this issue MVR register format is: Bits Field Name Description Type Reset 31:8 RESERVED RO 0x0 7:4 MAJOR Major revision number of the module. RO 0x-- 3:0 MINOR Minor revision number of the module. RO 0x-- OMAP4xxx: All revisions have this issue Revision id check is not used as the format of MVR resigster has changed For omap4 MVR register reads as: 0x50410602 => Revision id = 0x0602 Format of MVR register on omap4 is: (Courtesy: Cousson, Benoit) Bits Field Name Description Type Reset 31:30 SCHEME Scheme revision number of module RO 0x1 29:28 RESERVED RO 0x1 27:16 FUNC Function revision number of module RO 0x041 15:11 RTL Rtl revision number of module RO 0x00 10:8 MAJOR Major revision number of the module. RO 0x6 7:6 CUSTOM Custom revision number of the module. RO 0x0 5:0 MINOR Minor revision number of the module. RO 0x02 Override the default 8250 read handler: mem_serial_in() by a custom handler: serial_in_8250() which makes sure that RX fifo is not read when empty tested on zoom3(3630) board Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: NVikram Pandita <vikram.pandita@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Madhusudhan Chikkature 提交于
Update the hsmmc zoom peripheral configuration to support: Power saving mode mmc2 8-bit support Configure mmc2 as non removable Signed-off-by: NMadhusudhan Chikkature <madhu.cr@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 manjugk manjugk 提交于
The TWL4030 keypad driver is not enabled by default for zoom2 and zoom3 boards. This patch will enable the same for both zoom2 and zoom3 boards. Tested on zoom2(3430) and zoom3(3630) boards. Signed-off-by: NManjunatha GK <manjugk@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Sergey Lapin 提交于
The runtime detection of OMAP3515 and OMAP3525 was reversed. Signed-off-by: NSergey Lapin <slapin@ossfans.org> Signed-off-by: NSanjeev Premi <premi@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kalle Valo 提交于
Otherwise Extreme Lower Power (ELP) wakeup doesn't work properly. Signed-off-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Anand Gadiyar 提交于
omap3: zoom2/3: make MMC slot work again Commit 12f8dfb56 accidentally broke MMC on zoom2/3. The .vmmc1 field of zoom_twldata was deleted. Restoring it allows the MMC slot to work again Signed-off-by: NAnand Gadiyar <gadiyar@ti.com> Acked-by: NMadhusudhan Chikkature <madhu.cr@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Cory Maccarrone 提交于
The existing htcherald_defconfig did not include mux support, which prevented USB and other functionality from working out of the box. This change updates the defconfig to add it in. It also aligns the defconfig to the -rc8 kernel config. Signed-off-by: NCory Maccarrone <darkstar6262@gmail.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Janusz Krzysztofik 提交于
The patch corrects the issue introduced with one of my earlier patches: OMAP: DMA: Fix omapfb/lcdc on OMAP1510 broken when PM set[1] as pointed out by OMAP subsystem maintainer. Applies on top of my prevoius patch: OMAP: DMA: move LCD DMA related code from plat-omap to mach-omap1[2] Tested on Amstrad Delta Compile tested with omap_generic_2420_defconfig [1] http://patchwork.kernel.org/patch/57922/ [2] http://patchwork.kernel.org/patch/61952/Signed-off-by: NJanusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 vikram pandita 提交于
Remove unused data type omap_gpio_switch_config Thereby also get rid of following sparse warnings: arch/arm/plat-omap/include/plat/board.h :121:20: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :122:19: warning: dubious bitfield without explicit `signed' or `unsigned' arch/arm/plat-omap/include/plat/board.h :123:24: warning: dubious bitfield without explicit `signed' or `unsigned' Signed-off-by: NVikram Pandita <vikram.pandita@ti.com> Acked-by: NFelipe Balbi <felipe.balbi@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Ladislav Michl 提交于
Comment in omap_init_devices asks to keep init calls and their implementations in alphabetical order, so let it be that way. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Vimal Singh 提交于
For NAND devices '2' should be used with GPMC_CONFIG1_DEVICETYPE instead of '1'. Signed-off-by: NVimal Singh <vimalsingh@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-