Sometime cmpxchg_gpte doesn't modify gpte, in such case, don't mark
page table page as dirty.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch enables setting of efer bit 13 which is allowed
in all SVM capable processors. This is necessary for the
SLES11 version of Xen 4.0 to boot with nested svm.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds a function to dump the vmcb into the kernel
log and calls it after a failed vmrun to ease debugging.
Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

KVM_REQ_KICK poisons vcpu->requests by having a bit set during normal
operation.  This causes the fast path check for a clear vcpu->requests
to fail all the time, triggering tons of atomic operations.

Fix by replacing KVM_REQ_KICK with a vcpu->guest_mode atomic.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Return exception as a result of instruction emulation and handle
injection in KVM code.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Emulator shouldn't access vcpu directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Emulator shouldn't access vcpu directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

emulate_sysexit() should use shadowed registers copy instead of
looking into vcpu state directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Removes the need for set_flags() callback.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Return new RIP as part of instruction emulation result instead of
updating KVM's RIP from x86 emulator code.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

If emulation failed return immediately.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Return error to x86 emulator instead of injection exception behind its back.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

It is not called directly outside of the file it's defined in anymore.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently emulator returns -1 when emulation failed or IO is needed.
Caller tries to guess whether emulation failed by looking at other
variables. Make it easier for caller to recognise error condition by
always returning -1 in case of failure. For this new emulator
internal return value X86EMUL_IO_NEEDED is introduced. It is used to
distinguish between error condition (which returns X86EMUL_UNHANDLEABLE)
and condition that requires IO exit to userspace to continue emulation.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Fill in run->mmio details in (read|write)_emulated function just like
pio does. There is no point in filling only vcpu fields there just to
copy them into vcpu->run a little bit later.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Currently X86EMUL_PROPAGATE_FAULT, X86EMUL_RETRY_INSTR and
X86EMUL_CMPXCHG_FAILED have the same value so caller cannot
distinguish why function such as emulator_cmpxchg_emulated()
(which can return both X86EMUL_PROPAGATE_FAULT and
X86EMUL_CMPXCHG_FAILED) failed.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make (get|set)_dr() callback return error if it fails instead of
injecting exception behind emulator's back.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make set_cr() callback return error if it fails instead of injecting #GP
behind emulator's back.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Use callbacks from x86_emulate_ops to access segments instead of calling
into kvm directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

On VMX it is expensive to call get_cached_descriptor() just to get segment
base since multiple vmcs_reads are done instead of only one. Introduce
new call back get_cached_segment_base() for efficiency.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add (set|get)_msr callbacks to x86_emulate_ops instead of calling
them directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Add (set|get)_dr callbacks to x86_emulate_ops instead of calling
them directly.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

ljmp/lcall instruction operand contains address and segment.
It can be 10 bytes long. Currently we decode it as two different
operands. Fix it by introducing new kind of operand that can hold
entire far address.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Make it more explicit what we are checking for.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Dst operand is already initialized during decoding stage. No need to
reinitialize.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This instruction does not need generic decoding for its dst operand.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Introduce read cache which is needed for instruction that require more
then one exit to userspace. After returning from userspace the instruction
will be re-executed with cached read value.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

cr0.ts may change between entries, so we copy cr0 to HOST_CR0 before each
entry.  That is slow, so instead, set HOST_CR0 to have TS set unconditionally
(which is a safe value), and issue a clts() just before exiting vcpu context
if the task indeed owns the fpu.

Saves ~50 cycles/exit.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Annotate it thusly.
Signed-off-by: NAvi Kivity <avi@redhat.com>

Although we always allocate a new dirty bitmap in x86's get_dirty_log(),
it is only used as a zero-source of copy_to_user() and freed right after
that when memslot is clean. This patch uses clear_user() instead of doing
this unnecessary zero-source allocation.

Performance improvement: as we can expect easily, the time needed to
allocate a bitmap is completely reduced. In my test, the improved ioctl
was about 4 to 10 times faster than the original one for clean slots.
Furthermore, reducing memory allocations and copies will produce good
effects to caches too.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NAvi Kivity <avi@redhat.com>

!! is not needed due to the cast to bool.
Signed-off-by: NAvi Kivity <avi@redhat.com>

In common cases, guest SRAO MCE will cause corresponding poisoned page
be un-mapped and SIGBUS be sent to QEMU-KVM, then QEMU-KVM will relay
the MCE to guest OS.

But it is reported that if the poisoned page is accessed in guest
after unmapping and before MCE is relayed to guest OS, userspace will
be killed.

The reason is as follows. Because poisoned page has been un-mapped,
guest access will cause guest exit and kvm_mmu_page_fault will be
called. kvm_mmu_page_fault can not get the poisoned page for fault
address, so kernel and user space MMIO processing is tried in turn. In
user MMIO processing, poisoned page is accessed again, then userspace
is killed by force_sig_info.

To fix the bug, kvm_mmu_page_fault send HWPOISON signal to QEMU-KVM
and do not try kernel and user space MMIO processing for poisoned
page.

[xiao: fix warning introduced by avi]
Reported-by: NMax Asbock <masbock@linux.vnet.ibm.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  x86,kgdb: Fix hw breakpoint regression

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe
  [SCSI] zfcp: Update status read mempool
  [SCSI] zfcp: Do not wait for SBALs on stopped queue
  [SCSI] zfcp: Fix check whether unchained ct_els is possible
  [SCSI] ipr: fix resource path display and formatting

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high
  regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register
  wm8350-regulator: fix wm8350_register_regulator error handling
  ab3100: fix off-by-one value range checking for voltage selector

The function ecryptfs_uid_hash wrongly assumes that the
second parameter to hash_long() is the number of hash
buckets instead of the number of hash bits.
This patch fixes that and renames the variable
ecryptfs_hash_buckets to ecryptfs_hash_bits to make it
clearer.

Fixes: CVE-2010-2492
Signed-off-by: NAndre Osterhues <aosterhues@escrypt.com>
Signed-off-by: NTyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

HW breakpoints events stopped working correctly with kgdb
as a result of commit: 018cbffe
(Merge commit 'v2.6.33' into perf/core).

The regression occurred because the behavior changed for setting
NOTIFY_STOP as the return value to the die notifier if the breakpoint
was known to the HW breakpoint API.  Because kgdb is using the HW
breakpoint API to register HW breakpoints slots, it must also now
implement the overflow_handler call back else kgdb does not get to see
the events from the die notifier.

The kgdb_ll_trap function will be changed to be general purpose code
which can allow an easy way to implement the hw_breakpoint API
overflow call back.
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Acked-by: NDongdong Deng <dongdong.deng@windriver.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use complete_all and wake_up_all
  ceph: Correct obvious typo of Kconfig variable "CRYPTO_AES"
  ceph: fix dentry lease release
  ceph: fix leak of dentry in ceph_init_dentry() error path
  ceph: fix pg_mapping leak on pg_temp updates
  ceph: fix d_release dop for snapdir, snapped dentries
  ceph: avoid dcache readdir for snapdir

If we don't need a huge amount of memory in ->readdir() then
we can use kmalloc rather than vmalloc to allocate it. This
should cut down on the greater overheads associated with
vmalloc for smaller directories.

We may be able to eliminate vmalloc entirely at some stage,
but this is easy to do right away.

Also using GFP_NOFS to avoid any issues wrt to deleting inodes
while under a glock, and suggestion from Linus to factor out
the alloc/dealloc.

I've given this a test with a variety of different sized
directories and it seems to work ok.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and
DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD
voltage.

Pass the right platform data to the TPS6507x driver so it can operate
on the DEFDCDC{2,3}_HIGH register to read and change voltage levels.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NLiam Girdwood <lrg@slimlogic.co.uk>