here is the patch to support Owen SI-30 device.
This is a pulse counter controller.
http://www.owen.ru/en/catalog/93788515

usb-drivers output:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03eb ProdID=0030 Rev=01.01
C:  #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=00 Driver=cdc_acm
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm

This patch is installed on my home system which receives data from this
controller connected to cold water counter.
Signed-off-by: NDenis Pershin <dyp@perchine.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size
instead of le16_to_cpu(desc->wMaxPacketSize).
This patch fix it up

Cc: Armin Fuerst <fuerst@in.tum.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Johannes Erdfelt <johannes@erdfelt.com>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: David Kubicek <dave@awk.cz>
Cc: Johan Hovold <jhovold@gmail.com>
Cc: Brad Hards <bhards@bigpond.net.au>
Acked-by: NFelipe Balbi <balbi@ti.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de>
Cc: David Brownell <david-b@pacbell.net>
Cc: David Lopo <dlopo@chipidea.mips.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Xie Xiaobo <X.Xie@freescale.com>
Cc: Li Yang <leoli@freescale.com>
Cc: Jiang Bo <tanya.jiang@freescale.com>
Cc: Yuan-hsin Chen <yhchen@faraday-tech.com>
Cc: Darius Augulis <augulis.darius@gmail.com>
Cc: Xiaochen Shen <xiaochen.shen@intel.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: Thomas Abraham <thomas.ab@samsung.com>
Cc: Herbert Pötzl <herbert@13thfloor.at>
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Roman Weissgaerber <weissg@vienna.at>
Acked-by: NSarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: Florian Floe Echtler <echtler@fs.tum.de>
Cc: Christian Lucht <lucht@codemercs.com>
Cc: Juergen Stuber <starblue@sourceforge.net>
Cc: Georges Toth <g.toth@e-biz.lu>
Cc: Bill Ryder <bryder@sgi.com>
Cc: Kuba Ober <kuba@mareimbrium.org>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1482) adds a macro for testing whether or not a
pm_message value represents an autosuspend or autoresume (i.e., a
runtime PM) event.  Encapsulating this notion seems preferable to
open-coding the test all over the place.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>

Assign operator instead of equality test in the usbtmc_ioctl_abort_bulk_in() function.
Signed-off-by: NMaxim A. Nikulin <M.A.Nikulin@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Since printk_ratelimit() shouldn't be used anymore (see comment in
include/linux/printk.h), replace it with printk_ratelimited()
Signed-off-by: NManuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the Nokia E7 and C7 to the list of devices in cdc-acm, allowing
the secondary ACM channel on the device to be exposed. Without this patch
the ACM driver won't claim this secondary channel as it's marked as
having a vendor-specific protocol.
Signed-off-by: NToby Gray <toby.gray@realvnc.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Droids MuIn LCD operates like a serial remote terminal.
Data received are displayed directly on the LCD. This patch
fixes the kernel null pointer oops when it is plugged in.

Add NO_DATA_INTERFACE quirk to tell the driver that "control"
and "data" interfaces are not separated for this device, which
prevents dereferencing a null pointer in the device probe code.
Signed-off-by: NErik Slagter <erik@slagter.name>
Signed-off-by: NMaxin B. John <maxin.john@gmail.com>
Tested-by: NErik Slagter <erik@slagter.name>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch
- ensures no IO takes place during resets
- reports resets to user space
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Kill rx tasklet, which is no longer needed, and re-write read processing.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Allocate read urbs and read buffers in the same loop during probe.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No need to kill ctrl urb on errors as this is done later during close.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Clean up references to rx_buflimit.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The drain-delay code is no longer used, so remove it.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove unnecessary acm_tty_chars_in_buffer prototype.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove driver version and changelog which can be retrieved from git
history.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace dev_dbg with verbose dev_vdbg in read/write paths where
appropriate.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Clean up use of verbose debug.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace all remaining instances of dbg with dev_dbg.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Clean up some dev_err and dev_dbg messages and make sure that the
appropriate interface device is used for reporting consistently
throughout.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Upgrade out-of-memory dev_dbg to dev_err.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add missing newline to two dev_dbg and dev_err messages.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

Fix potential null-pointer exception on disconnect introduced by commit
11ea859d (USB: additional power savings
for cdc-acm devices that support remote wakeup).

Only access acm->dev after making sure it is non-null in control urb
completion handler.

Cc: stable <stable@kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Must check return value of tty_port_tty_get.

Cc: stable <stable@kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Prevent read urbs from being resubmitted from tasklet after port close.

The receive tasklet was not disabled on port close, which could lead to
corruption of receive lists on consecutive port open. In particular,
read urbs could be re-submitted before port open, added to free list in
open, and then added a second time to the free list in the completion
handler.

cdc-acm.c: Entering acm_tty_open.
cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0
cdc-acm.c: Entering acm_rx_tasklet
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64
cdc-acm.c: set line: 115200 0 0 8
cdc-acm.c: acm_control_msg: rq: 0x20 val: 0x0 len: 0x7 result: 7
cdc-acm.c: acm_tty_close
cdc-acm.c: acm_port_down
cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x0 len: 0x0 result: 0
cdc-acm.c: acm_ctrl_irq - urb shutting down with status: -2
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50
cdc-acm.c: Entering acm_read_bulk with status -2
cdc_acm 4-1:1.1: Aborting, acm not ready
cdc-acm.c: Entering acm_read_bulk with status -2
cdc_acm 4-1:1.1: Aborting, acm not ready
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da400, rcv 0xf57fbbe8, buf 0xf57fbd28
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da480, rcv 0xf57fbbd4, buf 0xf57fbd14
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da900, rcv 0xf57fbbc0, buf 0xf57fbd00
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da980, rcv 0xf57fbbac, buf 0xf57fbcec
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa00, rcv 0xf57fbb98, buf 0xf57fbcd8
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50daa80, rcv 0xf57fbb84, buf 0xf57fbcc4
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab00, rcv 0xf57fbb70, buf 0xf57fbcb0
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dab80, rcv 0xf57fbb5c, buf 0xf57fbc9c
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac00, rcv 0xf57fbb48, buf 0xf57fbc88
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dac80, rcv 0xf57fbb34, buf 0xf57fbc74
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad00, rcv 0xf57fbb20, buf 0xf57fbc60
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50dad80, rcv 0xf57fbb0c, buf 0xf57fbc4c
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da880, rcv 0xf57fbaf8, buf 0xf57fbc38
cdc-acm.c: Entering acm_tty_open.
cdc-acm.c: acm_control_msg: rq: 0x22 val: 0x3 len: 0x0 result: 0
cdc-acm.c: Entering acm_rx_tasklet
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da280, rcv 0xf57fbc24, buf 0xf57fbd64
cdc-acm.c: Entering acm_tty_write to write 3 bytes,
cdc-acm.c: Get 3 bytes...
cdc-acm.c: acm_write_start susp_count: 0
cdc-acm.c: Entering acm_read_bulk with status 0
------------[ cut here ]------------
WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120()
Hardware name: Vostro 1520
list_del corruption. next->prev should be f57fbc10, but was f57fbaf8
Modules linked in: cdc_acm
Pid: 3, comm: ksoftirqd/0 Not tainted 2.6.37+ #39
Call Trace:
 [<c103c7e2>] warn_slowpath_common+0x72/0xa0
 [<c11dd8ac>] ? list_del+0x10c/0x120
 [<c11dd8ac>] ? list_del+0x10c/0x120
 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40
 [<c11dd8ac>] list_del+0x10c/0x120
 [<f8051dbf>] acm_rx_tasklet+0xef/0x3e0 [cdc_acm]
 [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80
 [<c1042bb6>] tasklet_action+0xe6/0x140
 [<c104342f>] __do_softirq+0xaf/0x210
 [<c1043380>] ? __do_softirq+0x0/0x210
 <IRQ>  [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0
 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0
 [<c105ac24>] ? kthread+0x74/0x80
 [<c105abb0>] ? kthread+0x0/0x80
 [<c100337a>] ? kernel_thread_helper+0x6/0x10
---[ end trace efd9a11434f0082e ]---
------------[ cut here ]------------
WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:57 list_del+0x10c/0x120()
Hardware name: Vostro 1520
list_del corruption. next->prev should be f57fbd50, but was f57fbdb0
Modules linked in: cdc_acm
Pid: 3, comm: ksoftirqd/0 Tainted: G        W   2.6.37+ #39
Call Trace:
 [<c103c7e2>] warn_slowpath_common+0x72/0xa0
 [<c11dd8ac>] ? list_del+0x10c/0x120
 [<c11dd8ac>] ? list_del+0x10c/0x120
 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40
 [<c11dd8ac>] list_del+0x10c/0x120
 [<f8051dd6>] acm_rx_tasklet+0x106/0x3e0 [cdc_acm]
 [<c135465d>] ? net_rps_action_and_irq_enable+0x6d/0x80
 [<c1042bb6>] tasklet_action+0xe6/0x140
 [<c104342f>] __do_softirq+0xaf/0x210
 [<c1043380>] ? __do_softirq+0x0/0x210
 <IRQ>  [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0
 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0
 [<c105ac24>] ? kthread+0x74/0x80
 [<c105abb0>] ? kthread+0x0/0x80
 [<c100337a>] ? kernel_thread_helper+0x6/0x10
---[ end trace efd9a11434f0082f ]---
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da300, rcv 0xf57fbc10, buf 0xf57fbd50
cdc-acm.c: disconnected from network
cdc-acm.c: acm_rx_tasklet: sending urb 0xf50da380, rcv 0xf57fbbfc, buf 0xf57fbd3c
cdc-acm.c: Entering acm_rx_tasklet
------------[ cut here ]------------
WARNING: at /home/johan/src/linux/linux-2.6/lib/list_debug.c:48 list_del+0xd5/0x120()
Hardware name: Vostro 1520
list_del corruption, next is LIST_POISON1 (00100100)
Modules linked in: cdc_acm
Pid: 3, comm: ksoftirqd/0 Tainted: G        W   2.6.37+ #39
Call Trace:
 [<c103c7e2>] warn_slowpath_common+0x72/0xa0
 [<c11dd875>] ? list_del+0xd5/0x120
 [<c11dd875>] ? list_del+0xd5/0x120
 [<c103c8b3>] warn_slowpath_fmt+0x33/0x40
 [<c11dd875>] list_del+0xd5/0x120
 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm]
 [<c106dbab>] ? trace_hardirqs_on+0xb/0x10
 [<c1042b30>] ? tasklet_action+0x60/0x140
 [<c1042bb6>] tasklet_action+0xe6/0x140
 [<c104342f>] __do_softirq+0xaf/0x210
 [<c1043380>] ? __do_softirq+0x0/0x210
 <IRQ>  [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0
 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0
 [<c105ac24>] ? kthread+0x74/0x80
 [<c105abb0>] ? kthread+0x0/0x80
 [<c100337a>] ? kernel_thread_helper+0x6/0x10
---[ end trace efd9a11434f00830 ]---
BUG: unable to handle kernel paging request at 00200200
IP: [<c11dd7bd>] list_del+0x1d/0x120
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/tty/ttyACM0/uevent
Modules linked in: cdc_acm
Pid: 3, comm: ksoftirqd/0 Tainted: G        W   2.6.37+ #39 0T816J/Vostro 1520
EIP: 0060:[<c11dd7bd>] EFLAGS: 00010046 CPU: 0
EIP is at list_del+0x1d/0x120
EAX: f57fbd3c EBX: f57fb800 ECX: ffff8000 EDX: 00200200
ESI: f57fbe90 EDI: f57fbd3c EBP: f600bf54 ESP: f600bf3c
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process ksoftirqd/0 (pid: 3, ti=f600a000 task=f60791c0 task.ti=f6082000)
Stack:
 c1527e84 00000030 c1527e54 00100100 f57fb800 f57fbd3c f600bf98 f8051fac
 f8053104 f8052b94 f600bf6c c106dbab f600bf80 00000286 f60791c0 c1042b30
 f57fbda8 f57f5800 f57fbdb0 f57fbd80 f57fbe7c c1656b04 00000000 f600bfb0
Call Trace:
 [<f8051fac>] ? acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm]
 [<c106dbab>] ? trace_hardirqs_on+0xb/0x10
 [<c1042b30>] ? tasklet_action+0x60/0x140
 [<c1042bb6>] ? tasklet_action+0xe6/0x140
 [<c104342f>] ? __do_softirq+0xaf/0x210
 [<c1043380>] ? __do_softirq+0x0/0x210
 <IRQ>
 [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0
 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0
 [<c105ac24>] ? kthread+0x74/0x80
 [<c105abb0>] ? kthread+0x0/0x80
 [<c100337a>] ? kernel_thread_helper+0x6/0x10
Code: ff 48 14 e9 57 ff ff ff 90 90 90 90 90 90 55 89 e5 83 ec 18 81 38 00 01 10 00 0f 84 9c 00 00 00 8b 50 04 81 fa 00 02 20 00 74 33 <8b> 12 39 d0 75 5c 8b 10 8b 4a 04 39 c8 0f 85 b5 00 00 00 8b 48
EIP: [<c11dd7bd>] list_del+0x1d/0x120 SS:ESP 0068:f600bf3c
CR2: 0000000000200200
---[ end trace efd9a11434f00831 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 3, comm: ksoftirqd/0 Tainted: G      D W   2.6.37+ #39
Call Trace:
 [<c13fede1>] ? printk+0x1d/0x24
 [<c13fecce>] panic+0x66/0x15c
 [<c10067df>] oops_end+0x8f/0x90
 [<c1025476>] no_context+0xc6/0x160
 [<c10255a8>] __bad_area_nosemaphore+0x98/0x140
 [<c103cf68>] ? release_console_sem+0x1d8/0x210
 [<c1025667>] bad_area_nosemaphore+0x17/0x20
 [<c1025a49>] do_page_fault+0x279/0x420
 [<c1006a8f>] ? show_trace+0x1f/0x30
 [<c13fede1>] ? printk+0x1d/0x24
 [<c10257d0>] ? do_page_fault+0x0/0x420
 [<c140333b>] error_code+0x5f/0x64
 [<c103007b>] ? select_task_rq_fair+0x37b/0x6a0
 [<c10257d0>] ? do_page_fault+0x0/0x420
 [<c11dd7bd>] ? list_del+0x1d/0x120
 [<f8051fac>] acm_rx_tasklet+0x2dc/0x3e0 [cdc_acm]
 [<c106dbab>] ? trace_hardirqs_on+0xb/0x10
 [<c1042b30>] ? tasklet_action+0x60/0x140
 [<c1042bb6>] tasklet_action+0xe6/0x140
 [<c104342f>] __do_softirq+0xaf/0x210
 [<c1043380>] ? __do_softirq+0x0/0x210
 <IRQ>  [<c1042c9a>] ? run_ksoftirqd+0x8a/0x1c0
 [<c1042c10>] ? run_ksoftirqd+0x0/0x1c0
 [<c105ac24>] ? kthread+0x74/0x80
 [<c105abb0>] ? kthread+0x0/0x80
 [<c100337a>] ? kernel_thread_helper+0x6/0x10
panic occurred, switching back to text console
------------[ cut here ]------------

Cc: stable <stable@kernel.org>
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In the WDM class driver a disconnect event leads to calls to
usb_free_coherent to put back two USB DMA buffers allocated earlier.
The call to usb_free_coherent uses a different size parameter
(desc->wMaxCommand) than the corresponding call to usb_alloc_coherent
(desc->bMaxPacketSize0).

When a disconnect event occurs, this leads to 'bad dma' complaints
from usb core because the USB DMA buffer is being pushed back to the
'buffer-2048' pool from which it has not been allocated.

This patch against the most recent linux-2.6 kernel ensures that the
parameters used by usb_alloc_coherent & usb_free_coherent calls in
cdc-wdm.c match.
Signed-off-by: NRobert Lukassen <robert.lukassen@tomtom.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Only oddities here are a couple of drivers that bogusly called the ldisc
helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes
away.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Doing tiocmget was such fun we should do tiocmset as well for the same
reasons
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't actually need this and it causes problems for internal use of
this functionality. Currently there is a single use of the FILE * pointer.
That is the serial core which uses it to check tty_hung_up_p. However if
that is true then IO_ERROR is also already set so the check may be removed.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This adds the N8 to the list of devices in cdc-acm, in order to get the
secondary ACM device exposed.

In the spirit of:
http://kerneltrap.org/mailarchive/linux-usb/2010/9/4/6264554Signed-off-by: NArvid Ephraim Picciani <arvid.picciani@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

CC: Greg Kroah-Hartman <gregkh@suse.de>
CC: Oliver Neukum <oliver@neukum.org>
CC: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NOtavio Salvador <otavio@ossystems.com.br>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>

Certain USB devices, such as the Nokia X6 mobile phone, don't expose any
endpoint descriptors on some of their interfaces. If the ACM driver is forced
to probe all interfaces on a device the a NULL pointer dereference will occur
when the ACM driver attempts to use the endpoint of the alternative settings.
One way to get the ACM driver to probe all the interfaces is by using the
/sys/bus/usb/drivers/cdc_acm/new_id interface.

This patch checks that the endpoint pointer for the current alternate settings
is non-NULL before using it.
Signed-off-by: NToby Gray <toby.gray@realvnc.com>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

cdc-acm.c : Manage pseudo-modem without AT commands capabilities
  Enable to drive electronic simple gadgets based on microcontrolers.
  The Interface descriptor is like this:
    bInterfaceClass         2 Communications
    bInterfaceSubClass      2 Abstract (modem)
    bInterfaceProtocol      0 None
Signed-off-by: NPhilippe Corbes <philippe.corbes@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

S60 phones from Nokia and Samsung expose two ACM channels. The first is a modem
with a standard AT-command interface, which is picked up correctly by CDC-ACM.

The second ACM port is marked as having a vendor-specific protocol. This means
that the ACM driver will not claim the second channel by default.

This adds support for the second ACM channel for the following devices:
    Nokia E63
    Nokia E75
    Nokia 6760 Slide
    Nokia E52
    Nokia E55
    Nokia E72
    Nokia X6
    Nokia N97 Mini
    Nokia 5800 Xpressmusic
    Nokia E90
    Samsung GTi8510 (INNOV8)
Signed-off-by: NToby Gray <toby.gray@realvnc.com>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixed switch, brace, whitespace and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Acked-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The wait_event_interruptible_timeout in acm_port_down is
never reached. Remove it to avoid possible deadlocks
with the big tty mutex if someone were to start using
the blocking version of acm_port_down.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Nokia S60 phones expose two ACM channels. The first is
a modem, the second is 'vendor-specific' but is treated
as a serial device at the S60 end, so we want to expose
it on Linux too.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pavel@suse.cz no longer works, replace it with working address.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>