This patch pushes the "netif_running()" and "same type as before"
checks down into ieee80211_if_change_type() to centralise the
logic instead of duplicating it for cfg80211 and wext.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch revamps the virtual interface handling and makes the
code much easier to follow. Fewer functions, better names, less
spaghetti code.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Currently, almost every interface type has a 'bss' pointer
pointing to BSS information. This BSS information, however,
is for a _local_ BSS, not for the BSS we joined, so having
it on a STA mode interface makes little sense, but now they
have it pointing to the master device, which is an AP mode
virtual interface. However, except for some bitrate control
data, this pointer is only used in AP/VLAN modes (for power
saving stations.)

Overall, it is not necessary to even have the master netdev
be a valid virtual interface, and it doesn't have to be on
the list of interfaces either.

This patch changes the master netdev to be special, it now
 - no longer is on the list of virtual interfaces, which
   lets me remove a lot of tests for that
 - no longer has sub_if_data attached, since that isn't used

Additionally, this patch changes some vlan/ap mode handling
that is related to these 'bss' pointers described above (but
in the VLAN case they actually make sense because there they
point to the AP they belong to); it also adds some debugging
code to IEEE80211_DEV_TO_SUB_IF to validate it is not called
on the master netdev any more.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch implements the power management routines wireless extensions
for mac80211.
For now we only support switching PS mode between on and off.
Signed-off-by: NSamuel Ortiz <sameo@openedhand.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Multiple TX queue support is a core networking feature.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Accesses are mostly structured such that when there are multiple TX
queues the code transformations will be a little bit simpler.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This allows us to use this calling convention all the way down into
qdisc_restart().
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only plain netif_schedule() remains taking a net_device, mostly as a
compatability item while we transition the rest of these interfaces.

Everything else calls netif_schedule_queue() or __netif_schedule(),
both of which take a netdev_queue pointer.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Accomplish this by using local variables.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This indicates if the NOOP scheduler is what is active for TX on a
given device.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

First, we add a qdisc_tx_changing() helper which returns true if the
qdisc attachment is in transition.

Second, we remove an assertion warning which is of limited value and
is hard to express precisely in a multiqueue environment.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We schedule queues, not the device, for output queue processing in BH.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It just wants the root qdisc given an arbitrary qdisc,
and that is simply qdisc->dev_queue->qdisc
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NStephen Hemminger <shemminger@vyatta.com>

It is always equal to qdisc->dev_queue->lock
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that our qdisc management is bi-directional, per-queue, and fully
orthogonal, there is no reason to have a special ingress qdisc pointer
in struct net_device.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now qdisc, qdisc_sleeping, and qdisc_list also live there.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Every qdisc is assosciated with a queue, and in the case of ingress
qdiscs that will now be netdev->rx_queue so using that queue's lock is
the thing to do.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The lock is now an attribute of the device queue.

One thing to notice is that "suspicious" places
emerge which will need specific training about
multiple queue handling.  They are so marked with
explicit "netdev->rx_queue" and "netdev->tx_queue"
references.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It can be obtained via the netdev_queue.  So create a helper routine,
qdisc_dev(), to make the transformations nicer looking.

Now, qdisc_alloc() now no longer needs a net_device pointer argument.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A netdev_queue is an entity managed by a qdisc.

Currently there is one RX and one TX queue, and a netdev_queue merely
contains a backpointer to the net_device.

The Qdisc struct is augmented with a netdev_queue pointer as well.

Eventually the 'dev' Qdisc member will go away and we will have the
resulting hierarchy:

	net_device --> netdev_queue --> Qdisc

Also, qdisc_alloc() and qdisc_create_dflt() now take a netdev_queue
pointer argument.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We haven't had netdev->tbusy in many years :)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- vlan_dev_reorder_header() is only called on the receive path after
  calling skb_share_check(). This means we can use skb_cow() since
  all we need is a writable header.

- vlan_dev_hard_header() includes a work-around for some apparently
  broken out of tree MPLS code. The hard_header functions can expect
  to always have a headroom of at least there own hard_header_len
  available, so the reallocation check is unnecessary.

- __vlan_put_tag() can use skb_cow_head() to avoid the skb_unshare()
  copy when the header is writable.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Consider the following scenario:

ipv6_del_addr(ifp)
  ipv6_ifa_notify(RTM_DELADDR, ifp)
    ip6_del_rt(ifp->rt)

after returning from the ipv6_ifa_notify and enabling BH-s
back, but *before* calling the addrconf_del_timer the 
ifp->timer fires and:

addrconf_dad_timer(ifp)
  addrconf_dad_completed(ifp)
    ipv6_ifa_notify(RTM_NEWADDR, ifp)
      ip6_ins_rt(ifp->rt)

then return back to the ipv6_del_addr and:

in6_ifa_put(ifp)
  inet6_ifa_finish_destroy(ifp)
    dst_release(&ifp->rt->u.dst)

After this we have an ifp->rt inserted into fib6 lists, but 
queued for gc, which in turn can result in oopses in the
fib6_run_gc. Maybe some other nasty things, but we caught 
only the oops in gc so far.

The solution is to disarm the ifp->timer before flushing the
rt from it.
Signed-off-by: NAndrey Vagin <avagin@parallels.com>
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Although I only tested similar code (I don't use any of this wireless
code), the state maintainance between Netlink dump callback invocations
seems wrong here and should lead to an endless loop. There are also other
examples in the same file which might have the same problem. Perhaps someone
can actually test this (or refute my logic).

Take the simple example with only one element in the list (which should fit
into the message):

1. invocation:
  Start:
    idx = 0, start = 0
  Loop:
    condition (++idx < start) => (1 < 0) => false
    => no continue, fill one entry, exit loop, return skb->len > 0

2. invocation:
  Start:
    idx = 0, start = 1
  Loop:
    condition (++idx < start) => (1 < 1) => false
    => no continue, fill the same entry again, exit loop, return skb->len > 0

3. invocation:
  Same as 2. invocation, endless invocation of callback.

Also, iterations where the filling of an element fails should not be counted as
completed, so idx should not be incremented in this case.
Signed-off-by: NJulius Volz <juliusv@google.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Fix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation.
Fix a few typos also.

Note: Some fields are marked as TBD and need to have their description
corrected.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

rfkill_add_switch() calls rfkill_toggle_radio() to set the state of a
recently registered rfkill class to the current global state [for that
rfkill->type].

The rfkill_toggle_radio() call is going to error out if the hardware is
RFKILL_STATE_HARD_BLOCKED, and the global state is RFKILL_STATE_UNBLOCKED.

That is a quite normal situation which I missed to account for.  As things
stand, the error return from rfkill_toggle_radio ends up causing
rfkill_register to bail out with an error (de-registering the new switch in
the process), which is Not Nice.

Change rfkill_add_switch() to not return errors because of a failed call to
rfkill_toggle_radio().  We can go back to returning errors again (if that's
indeed the right thing to do) if we define the exact error codes the
rfkill->toggle_radio callbacks are to return in each situation, so that we
can ignore the right ones only.

Bug reported by "kionez <kionez@anche.no>".
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: kionez <kionez@anche.no>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Improve rfkill_toggle_radio's kernel-doc header a bit.
Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Recalculate the offset pointers in the ccmp calculations rather than
in the callers.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch removes call of ieee80211_bss_info_change_notify from within
ieee80211_reset_erp_info. This allows gathering all bss info changes
into one call to the driver in the disassociation flow.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Acked-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Do the check for sufficient skb->len explicitly and pass a pointer
to the struct ieee80211_hdr directly to the michael_mic calculation.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ccmp_special_blocks was only using it to calculate data_len,
calculate that directly.

Use unaligned helpers rather than masking/shifting.

Use symbolic constants for the masked frame_control, and do it directly
on a le16 value.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

ETH_ALEN and IEEE80211_QOS_CTL_LEN
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Also remove the WLAN_IS_QOS_DATA inline after removing the last
two users.  This starts moving away from using rx->fc to using
the header frame_control directly.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch removes MAC80211_DEBUG from /net/mac80211/Kconfig
(in MAC80211_DEBUG_COUNTERS config entry), and replaces
MAC80211_DEBUG_MENU instead of MAC80211_DEBUG
(in MAC80211_VERBOSE_SPECT_MGMT_DEBUG config entry).
Signed-off-by: NRami Rosen <ramirose@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>