- 14 2月, 2007 10 次提交
-
-
由 David Brownell 提交于
Driver model updates for the I2C core: - Add new suspend(), resume(), and shutdown() methods. Use them in the standard driver model style; document them. - Minor doc updates to highlight zero-initialized fields in drivers, and the driver model accessors for "clientdata". If any i2c drivers were previously using the old suspend/resume calls in "struct driver", they were getting warning messages ... and will now no longer work. Other than that, this patch changes no behaviors; and it lets I2C drivers use conventional PM and shutdown support. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
i2c-core and i2c-isa use completions without including <linux/completion.h>. Fix it. i2c-powermac includes <linux/completion.h> but doesn't use any completion. Fix it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Brownell <david-b@pacbell.net>
-
由 Jean Delvare 提交于
This is a frequently asked question so it deserves a paragraph in the driver documentation. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Mike Frysinger 提交于
Write data, don't read it. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Add support for the ATI SB600 SMBus controller. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Hans-Frieder Vogt <hfvogt@gmx.net>
-
由 David Brownell 提交于
Remove a superfluous initialization from the vt8231 hwmon driver; the i2c core does this, and the source field will be vanishing soon. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The i2c-ali1563 initialization looks quite broken to me: * If the I/O space isn't enabled, we forcibly set 3 bits in the PCI configuration space instead of just the one enabling the I/O space. * After that we pretend to check if the write worked, but we don't actually read the new value from the register. * It's probably not a good idea to enable the I/O space if no base address has been set. So I propose the following changes to that part of the driver: * Merge ali1563_enable() into ali1563_setup(). * Check the base address before the I/O space enabled bit. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NRudolf Marek <r.marek@assembler.cz>
-
由 Jean Delvare 提交于
Improve the status messages printed by the i2c-ali1563 driver. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Rudolf Marek <r.marek@assembler.cz>
-
- 13 2月, 2007 30 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC]: Re-export saved_command_line to modules. [SPARC64]: Increase command line size to 2048 like other arches. [SPARC64]: We do not need ZONE_DMA.
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits) [XFRM]: Fix OOPSes in xfrm_audit_log(). [TCP]: cleanup of htcp (resend) [TCP]: Use read mostly for CUBIC parameters. [NETFILTER]: nf_conntrack_tcp: make sysctl variables static [NETFILTER]: ip6t_mh: drop piggyback payload packet on MH packets [NETFILTER]: Fix whitespace errors [NETFILTER]: Kconfig: improve dependency handling [NETFILTER]: xt_mac/xt_CLASSIFY: use IPv6 hook names for IPv6 registration [NETFILTER]: nf_conntrack: change nf_conntrack_l[34]proto_unregister to void [NETFILTER]: nf_conntrack: properly use RCU for nf_conntrack_destroyed callback [NETFILTER]: ip_conntrack: properly use RCU for ip_conntrack_destroyed callback [NETFILTER]: nf_conntrack: fix invalid conntrack statistics RCU assumption [NETFILTER]: ip_conntrack: fix invalid conntrack statistics RCU assumption [NETFILTER]: nf_conntrack: properly use RCU API for nf_ct_protos/nf_ct_l3protos arrays [NETFILTER]: ip_conntrack: properly use RCU API for ip_ct_protos array [NETFILTER]: nf_nat: properly use RCU API for nf_nat_protos array [NETFILTER]: ip_nat: properly use RCU API for ip_nat_protos array [NETFILTER]: nf_log: minor cleanups [NETFILTER]: nf_log: switch logger registration/unregistration to mutex [NETFILTER]: nf_log: make nf_log_unregister_pf return void ...
-
由 David S. Miller 提交于
This reverts some bogosity from the dynamic command-line changes made on sparc32 and sparc64. Drivers such as drivers/sbus/char/openprom.c reference saved_command_line, and can be modular. The boot_command_line is __initdata, yet the dynamic command-line changes add modular exports of that symbol, obviously wrong. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Since we look in both source and object directories for localversion* files, we accidentally ended up getting them twice. Use 'sort -u' to avoid that. Reported-by: NTony Luck <tony.luck@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Make sure that this function is called correctly, and add BUG() checking to ensure the arguments are sane. Based upon a patch by Joy Latten. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Minor non-invasive cleanups: * white space around operators and line wrapping * use const * use __read_mostly Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
These module parameters should be in the read mostly area to avoid cache pollution. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
sysctls are registered by the protocol module itself since 2.6.19, no need to have them visible to others. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Masahide NAKAMURA 提交于
Regarding RFC3775, MH payload proto field should be IPPROTO_NONE. Otherwise it must be discarded (and the receiver should send ICMP error). We assume filter should drop such piggyback everytime to disallow slipping through firewall rules, even the final receiver will discard it. Signed-off-by: NMasahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Instead of depending on internally needed options and letting users figure out what is needed, select them when needed: - IP_NF_IPTABLES, IP_NF_ARPTABLES and IP6_NF_IPTABLES select NETFILTER_XTABLES - NETFILTER_XT_TARGET_CONNMARK, NETFILTER_XT_MATCH_CONNMARK and IP_NF_TARGET_CLUSTERIP select NF_CONNTRACK_MARK - NETFILTER_XT_MATCH_CONNBYTES selects NF_CT_ACCT Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Use NF_IP6_ instead of NF_IP_. The values are identical, this is merely cleanup. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
No caller checks the return value, and since its usually called within the module unload path there's nothing a module could do about errors anyway, so BUG on invalid conditions and return void. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
NF_CT_STAT_INC assumes rcu_read_lock in nf_hook_slow disables preemption as well, making it legal to use __get_cpu_var without disabling preemption manually. The assumption is not correct anymore with preemptable RCU, additionally we need to protect against softirqs when not holding nf_conntrack_lock. Add NF_CT_STAT_INC_ATOMIC macro, which disables local softirqs, and use where necessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
CONNTRACK_STAT_INC assumes rcu_read_lock in nf_hook_slow disables preemption as well, making it legal to use __get_cpu_var without disabling preemption manually. The assumption is not correct anymore with preemptable RCU, additionally we need to protect against softirqs when not holding ip_conntrack_lock. Add CONNTRACK_STAT_INC_ATOMIC macro, which disables local softirqs, and use where necessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in all paths not obviously only used within packet process context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in all paths not obviously only used within packet process context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in paths used outside of packet processing context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Replace preempt_{enable,disable} based RCU by proper use of the RCU API and add missing rcu_read_lock/rcu_read_unlock calls in paths used outside of packet processing context (nfnetlink_conntrack). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
- rename nf_logging to nf_loggers since its an array of registered loggers - rename nf_log_unregister_logger() to nf_log_unregister() to make it symetrical to nf_log_register() and convert all users Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The spinlock is only used in process context (register/unregister), switch to a mutex. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Since the only user of nf_log_unregister_pf (nfnetlink_log) doesn't check the return value, change it to void and bail out silently when a non-existant address family is supplied. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Also replace synchronize_net() calls by synchronize_rcu() since the RCU protected data is also used for sysfs. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The spinlock is only used in process context (register/unregister) since RCU is used for the nf_hook lists, switch to a mutex. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The spinlock is only used in process context (register/unregister), switch to a mutex. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
We're only adding to the list, no need to synchronize. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-