Turn power led off, if device is disconnected
Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

bugfix: Avoid loosing frames, causing image delays on some of the image lines.

[mchehab@redhat.com: Fix compilation breakage by merging with the patch fix]
Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add case line for vbi message
Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add new function for reset I2C bus. Rework some code for use this function.
Signed-off-by: NBeholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

add module init over tm6000 extension
Signed-off-by: NStefan Ringel <stefan.ringel@arcor.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This change adds support for Avermedia M733A. The original version for
linux 2.6.31 was sent to me from Avermedia, original author is unknown.
I ported it to current kernels, expanded and fixed key code handling for
RM-K6 remote control, and added an additional pci id also supported.

[mchehab@redhat.com: make checkpatch.pl happier]
Signed-off-by: NHerton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following OOPS happened when plugging two TT s2-1600:

[   96.521023] saa7146: register extension 'budget dvb'.
[   96.521052] budget dvb 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   96.521070] IRQ 16/: IRQF_DISABLED is not guaranteed on shared IRQs
[   96.521076] saa7146: found saa7146 @ mem ffffc90011182c00 (revision 1, irq 16) (0x13c2,0x101c).
[   96.521080] saa7146 (0): dma buffer size 192512
[   96.521081] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[   96.539929] adapter has MAC addr = 00:d0:5c:cc:b0:a2
[   96.890149] stv6110x_attach: Attaching STV6110x
[   96.912516] DVB: registering adapter 0 frontend 0 (STV090x Multistandard)...
[   96.912600] budget dvb 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   96.912639] IRQ 17/: IRQF_DISABLED is not guaranteed on shared IRQs
[   96.912667] saa7146: found saa7146 @ mem ffffc90011314800 (revision 1, irq 17) (0x13c2,0x101c).
[   96.912673] saa7146 (1): dma buffer size 192512
[   96.912676] DVB: registering new adapter (TT-Budget S2-1600 PCI)
[   96.930893] adapter has MAC addr = 00:d0:5c:cc:b0:a3
[   97.233478] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[   97.233647] IP: [<ffffffffa029c450>] stv6110x_set_mode+0x70/0x80 [stv6110x]
[   97.233753] PGD 3c16f067 PUD 3c383067 PMD 0
[   97.234147] CPU 0
[   97.234246] Pid: 5200, comm: modprobe Not tainted 2.6.33.2 #1 P5QSE/P5Q SE
[   97.234317] RIP: 0010:[<ffffffffa029c450>]  [<ffffffffa029c450>] stv6110x_set_mode+0x70/0x80 [stv6110x]
[   97.234456] RSP: 0018:ffff88003c125c98  EFLAGS: 00010246
[   97.234461] RAX: ffffffffa029c460 RBX: ffff88003f84d800 RCX: ffff88003a19e140
[   97.234461] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
[   97.234461] RBP: ffff88003f84d828 R08: 0000000000000002 R09: 0000000000000004
[   97.234461] R10: 0000000000000003 R11: 0000000000000010 R12: ffff88003f84d800
[   97.234461] R13: ffff88003f84d828 R14: ffff88003f84d828 R15: 0000000000000001
[   97.234461] FS:  00007f9f7253e6f0(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
[   97.234461] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   97.234461] CR2: 0000000000000010 CR3: 000000003c382000 CR4: 00000000000006b0
[   97.234461] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   97.234461] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   97.234461] Process modprobe (pid: 5200, threadinfo ffff88003c124000, task ffff88003e893ac0)
[   97.234461]  ffff88003f84d800 ffff88003f84d828 ffff88003f84d800 ffffffffa0292343
[   97.234461] <0> ffff88003f84d828 ffff88003ef70ae0 ffffffffa0280800 ffffffffa02934d2
[   97.234461] <0> ffffffffa0295260 0000000000000000 ffffffffa02948b0 ffff88003df79800
[   97.234461]  [<ffffffffa0292343>] ? stv090x_sleep+0x33/0x120 [stv090x]
[   97.234461]  [<ffffffffa02934d2>] ? stv090x_attach+0x1e2/0x73c [stv090x]
[   97.234461]  [<ffffffff81007cc5>] ? dma_generic_alloc_coherent+0xa5/0x160
[   97.234461]  [<ffffffffa026e1f5>] ? saa7146_init_one+0x7d5/0x910 [saa7146]
[   97.234461]  [<ffffffff811b84b2>] ? local_pci_probe+0x12/0x20
[   97.234461]  [<ffffffff811b87d0>] ? pci_device_probe+0x110/0x120
[   97.234461]  [<ffffffff81221788>] ? driver_probe_device+0x98/0x1b0
[   97.234461]  [<ffffffff81221933>] ? __driver_attach+0x93/0xa0
[   97.234461]  [<ffffffff812218a0>] ? __driver_attach+0x0/0xa0
[   97.234461]  [<ffffffff81220f18>] ? bus_for_each_dev+0x58/0x80
[   97.234461]  [<ffffffff8122079d>] ? bus_add_driver+0x14d/0x280
[   97.234461]  [<ffffffffa0284000>] ? budget_init+0x0/0xc [budget]
[   97.234461]  [<ffffffff81221c29>] ? driver_register+0x79/0x170
[   97.234461]  [<ffffffffa0284000>] ? budget_init+0x0/0xc [budget]
[   97.234461]  [<ffffffff811b8a48>] ? __pci_register_driver+0x58/0xe0
[   97.234461]  [<ffffffffa0284000>] ? budget_init+0x0/0xc [budget]
[   97.234461]  [<ffffffff810001d5>] ? do_one_initcall+0x35/0x190
[   97.234461]  [<ffffffff81063d37>] ? sys_init_module+0xe7/0x260
[   97.234461]  [<ffffffff8100256b>] ? system_call_fastpath+0x16/0x1b
[   97.234461] RIP  [<ffffffffa029c450>] stv6110x_set_mode+0x70/0x80 [stv6110x]
[   97.234461]  RSP <ffff88003c125c98>
[   97.240074] ---[ end trace b53ecbbbbef15e99 ]---

Prevents calling stv6110x_set_mode() if fe->tuner_priv is not defined,
in order to avoid the above bug.
Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for the DVB-C frontend of the TT CT-3650.
DVB-T fe, CI and IR are not implemented.
Signed-off-by: NGuy Martin <gmsoft@tuxicoman.be>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since there is only one possible format just have all three calls
do the same.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Get rid of unnecessary code since this driver supports only one
pixel format. Removing this code will make the transition to the
mbus API easier as well.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Several calls (try_fmt, g_parm among others) changed the current standard
as a side effect of that call. But the standard may only be changed by s_std.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: NVaibhav Hiremath <hvaibhav@ti.com>
Tested-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

enum_mbus_fmt received an index argument that was defined as an int instead
of an unsigned int. This is now fixed. This had the knock-on effect that the
index argument in the callback get_formats in soc_camera.h also had to be
changed to unsigned int.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

g/s_fmt is going to disappear, so if it is not doing anything, then
just remove it.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Note that this driver is only used by em28xx and that em28xx does not
actually call the enum/try/s_fmt ops of mt9v011. So these functions
have never been tested.

And in fact the driver really implements cropping instead of scaling. So it
seems to be doing the wrong thing :-(
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Needed for mt9v011.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

cx18 has now switched over completely to the new mediabus subdev ops.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make explicit what should happen when the input signal is missing,
unreliable or does not map to a supported preset.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove debug message.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>