Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 28 5月, 2015 1 次提交
    • R
      cpumask_set_cpu_local_first => cpumask_local_spread, lament · f36963c9
      由 Rusty Russell 提交于 
      da91309e (cpumask: Utility function to set n'th cpu...) created a
genuinely weird function.  I never saw it before, it went through DaveM.
(He only does this to make us other maintainers feel better about our own
mistakes.)

cpumask_set_cpu_local_first's purpose is say "I need to spread things
across N online cpus, choose the ones on this numa node first"; you call
it in a loop.

It can fail.  One of the two callers ignores this, the other aborts and
fails the device open.

It can fail in two ways: allocating the off-stack cpumask, or through a
convoluted codepath which AFAICT can only occur if cpu_online_mask
changes.  Which shouldn't happen, because if cpu_online_mask can change
while you call this, it could return a now-offline cpu anyway.

It contains a nonsensical test "!cpumask_of_node(numa_node)".  This was
drawn to my attention by Geert, who said this causes a warning on Sparc.
It sets a single bit in a cpumask instead of returning a cpu number,
because that's what the callers want.

It could be made more efficient by passing the previous cpu rather than
an index, but that would be more invasive to the callers.

Fixes: da91309e
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased)
Tested-by: NAmir Vadai <amirv@mellanox.com>
Acked-by: NAmir Vadai <amirv@mellanox.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
      f36963c9
  3. 19 4月, 2015 1 次提交
  5. 17 4月, 2015 1 次提交
  7. 10 3月, 2015 1 次提交
  9. 03 7月, 2014 1 次提交
  11. 12 6月, 2014 1 次提交
    • A
      cpumask: Utility function to set n'th cpu - local cpu first · da91309e
      由 Amir Vadai 提交于 
      This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set

Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      da91309e
  13. 02 6月, 2014 2 次提交
    • D
      net: Revert mlx4 cpumask changes. · ee39facb
      由 David S. Miller 提交于 
      This reverts commit 70a640d0
("net/mlx4_en: Use affinity hint") and commit
c8865b64 ("cpumask: Utility function
to set n'th cpu - local cpu first") because these changes break
the build when SMP is disabled amongst other things.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ee39facb
    • A
      cpumask: Utility function to set n'th cpu - local cpu first · c8865b64
      由 Amir Vadai 提交于 
      This function sets the n'th cpu - local cpu's first.
For example: in a 16 cores server with even cpu's local, will get the
following values:
cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set
cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set
...
cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set
cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set
cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set
...
cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set

Curently this function will be used by multi queue networking devices to
calculate the irq affinity mask, such that as many local cpu's as
possible will be utilized to handle the mq device irq's.
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      c8865b64
  15. 22 1月, 2014 1 次提交
    • S
      lib/cpumask.c: use memblock apis for early memory allocations · c1529500
      由 Santosh Shilimkar 提交于 
      Switch to memblock interfaces for early memory allocator instead of
bootmem allocator.  No functional change in beahvior than what it is in
current code from bootmem users points of view.

Archs already converted to NO_BOOTMEM now directly use memblock
interfaces instead of bootmem wrappers build on top of memblock.  And
the archs which still uses bootmem, these new apis just fallback to
exiting bootmem APIs.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c1529500
  17. 12 12月, 2012 1 次提交
    • J
      bootmem: fix wrong call parameter for free_bootmem() · 81df9bff
      由 Joonsoo Kim 提交于 
      It is strange that alloc_bootmem() returns a virtual address and
free_bootmem() requires a physical address.  Anyway, free_bootmem()'s
first parameter should be physical address.

There are some call sites for free_bootmem() with virtual address.  So fix
them.

[akpm@linux-foundation.org: improve free_bootmem() and free_bootmem_pate() documentation]
Signed-off-by: NJoonsoo Kim <js1304@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      81df9bff
  19. 29 3月, 2012 1 次提交
  21. 08 3月, 2012 1 次提交
  23. 27 7月, 2011 2 次提交
  25. 30 3月, 2010 1 次提交
    • T
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      由 Tejun Heo 提交于 
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: NTejun Heo <tj@kernel.org>
Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  27. 12 6月, 2009 1 次提交
  29. 09 6月, 2009 1 次提交
  31. 03 4月, 2009 1 次提交
  33. 01 1月, 2009 2 次提交
  35. 19 12月, 2008 2 次提交
    • M
      cpumask: documentation for cpumask_var_t · ec26b805
      由 Mike Travis 提交于 
      Impact: New kerneldoc comments

Additional documentation added to all the alloc_cpumask and free_cpumask
functions.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor additions)
      ec26b805
    • M
      cpumask: Add alloc_cpumask_var_node() · 7b4967c5
      由 Mike Travis 提交于 
      Impact: New API

This will be needed in x86 code to allocate the domain and old_domain
cpumasks on the same node as where the containing irq_cfg struct is
allocated.

(Also fixes double-dump_stack on rare CONFIG_DEBUG_PER_CPU_MAPS case)
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (re-impl alloc_cpumask_var)
      7b4967c5
  37. 10 11月, 2008 1 次提交
  39. 07 11月, 2008 1 次提交
  41. 06 11月, 2008 1 次提交
    • R
      cpumask: introduce new API, without changing anything · 2d3854a3
      由 Rusty Russell 提交于 
      Impact: introduce new APIs

We want to deprecate cpumasks on the stack, as we are headed for
gynormous numbers of CPUs.  Eventually, we want to head towards an
undefined 'struct cpumask' so they can never be declared on stack.

1) New cpumask functions which take pointers instead of copies.
   (cpus_* -> cpumask_*)

2) Several new helpers to reduce requirements for temporary cpumasks
   (cpumask_first_and, cpumask_next_and, cpumask_any_and)

3) Helpers for declaring cpumasks on or offstack for large NR_CPUS
   (cpumask_var_t, alloc_cpumask_var and free_cpumask_var)

4) 'struct cpumask' for explicitness and to mark new-style code.

5) Make iterator functions stop at nr_cpu_ids (a runtime constant),
   not NR_CPUS for time efficiency and for smaller dynamic allocations
   in future.

6) cpumask_copy() so we can allocate less than a full cpumask eventually
   (for alloc_cpumask_var), and so we can eliminate the 'struct cpumask'
   definition eventually.

7) work_on_cpu() helper for doing task on a CPU, rather than saving old
   cpumask for current thread and manipulating it.

8) smp_call_function_many() which is smp_call_function_mask() except
   taking a cpumask pointer.

Note that this patch simply introduces the new functions and leaves
the obsolescent ones in place.  This is to simplify the transition
patches.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2d3854a3
  43. 24 5月, 2008 1 次提交
    • M
      x86: Add performance variants of cpumask operators · 41df0d61
      由 Mike Travis 提交于 
        * Increase performance for systems with large count NR_CPUS by limiting
    the range of the cpumask operators that loop over the bits in a cpumask_t
    variable.  This removes a large amount of wasted cpu cycles.

  * Add performance variants of the cpumask operators:

    int cpus_weight_nr(mask)	     Same using nr_cpu_ids instead of NR_CPUS
    int first_cpu_nr(mask)	     Number lowest set bit, or nr_cpu_ids
    int next_cpu_nr(cpu, mask)	     Next cpu past 'cpu', or nr_cpu_ids
    for_each_cpu_mask_nr(cpu, mask)  for-loop cpu over mask using nr_cpu_ids

  * Modify following to use performance variants:

    #define num_online_cpus()	cpus_weight_nr(cpu_online_map)
    #define num_possible_cpus()	cpus_weight_nr(cpu_possible_map)
    #define num_present_cpus()	cpus_weight_nr(cpu_present_map)

    #define for_each_possible_cpu(cpu) for_each_cpu_mask_nr((cpu), ...)
    #define for_each_online_cpu(cpu)   for_each_cpu_mask_nr((cpu), ...)
    #define for_each_present_cpu(cpu)  for_each_cpu_mask_nr((cpu), ...)

  * Comment added to include/linux/cpumask.h:

    Note: The alternate operations with the suffix "_nr" are used
	  to limit the range of the loop to nr_cpu_ids instead of
	  NR_CPUS when NR_CPUS > 64 for performance reasons.
	  If NR_CPUS is <= 64 then most assembler bitmask
	  operators execute faster with a constant range, so
	  the operator will continue to use NR_CPUS.

	  Another consideration is that nr_cpu_ids is initialized
	  to NR_CPUS and isn't lowered until the possible cpus are
	  discovered (including any disabled cpus).  So early uses
	  will span the entire range of NR_CPUS.

    (The net effect is that for systems with 64 or less CPU's there are no
     functional changes.)

For inclusion into sched-devel/latest tree.

Based on:
	git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    +   sched-devel/latest  .../mingo/linux-2.6-sched-devel.git

Cc: Paul Jackson <pj@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Reviewed-by: NPaul Jackson <pj@sgi.com>
Reviewed-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      41df0d61
  45. 08 5月, 2007 1 次提交
  47. 21 2月, 2007 1 次提交
  49. 21 10月, 2006 1 次提交
    • A
      [PATCH] highest_possible_node_id() linkage fix · 6220ec78
      由 Andrew Morton 提交于 
      Qooting Adrian:

- net/sunrpc/svc.c uses highest_possible_node_id()

- include/linux/nodemask.h says highest_possible_node_id() is
  out-of-line #if MAX_NUMNODES > 1

- the out-of-line highest_possible_node_id() is in lib/cpumask.c

- lib/Makefile: lib-$(CONFIG_SMP) += cpumask.o
  CONFIG_ARCH_DISCONTIGMEM_ENABLE=y, CONFIG_SMP=n, CONFIG_SUNRPC=y

-> highest_possible_node_id() is used in net/sunrpc/svc.c
   CONFIG_NODES_SHIFT defined and > 0

-> include/linux/numa.h: MAX_NUMNODES > 1

-> compile error

The bug is not present on architectures where ARCH_DISCONTIGMEM_ENABLE
depends on NUMA (but m32r isn't the only affected architecture).

So move the function into page_alloc.c

Cc: Adrian Bunk <bunk@stusta.de>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6220ec78
  51. 02 10月, 2006 1 次提交
  53. 26 3月, 2006 4 次提交